spring semester exam – Flashcards

Unlock all answers in this set

Unlock answers
question
The force that holds two atoms together is called a chemical bond.
answer
True
question
Chemical bonds may form as a result of the attraction of a nucleus for another atom's electrons.
answer
True
question
To form a negative ion, a neutral atom must lose electrons.
answer
F,gain
question
The reactivity of an element depends mainly on the number of ______.
answer
Valence electrons
question
The electron structures of transition-element ions that have outer configurations with full s, p, and d sublevels are called ______.
answer
Pseudo-noble gas configurations
question
What is the electron configuration for the noble gases other than helium?
answer
ns^2np^6
question
How many outermost d electrons are there in an ion that has achieved a pseudo-noble gas configuration?
answer
ten
question
A cation is a negatively charged particle.
answer
F, positively
question
The force that holds two atoms together
answer
chemical bond
question
A positively charged ion
answer
Cation
question
A negatively charge ion
answer
anion
question
In the ionic compund sodium chloride, the one-to-one ratio of monatomic ions produces a binary crystal.
answer
F, cubic
question
When ionic compounds form, positive and negative ions are packed together in an ionic oxide.
answer
F, crystal
question
The formation of ionic compounds from positive and negative ions is almost always endothermic.
answer
F, exothermic
question
In a crystal lattice, each positive ion is surrounded by negative ions.
answer
T
question
The more negative the lattice energy is, the stronger is the force of attraction between the ions of an ionic compound.
answer
T
question
An ionic compound whose aqueous solution conducts electricity
answer
electrolyte
question
The name for most ionic compounds other than oxides
answer
metallic bond
question
The energy needed to seperate the ions of an ionic compound
answer
lattice energy
question
The electrostatic force that holds oppositely charged particles together
answer
ionic bond
question
The simplest ratio of the ions represented in an ionic compound is called a formula unit.
answer
T
question
The overall charge of a formula unit for a compound is never zero.
answer
F, always
question
A sulfate ion contains fewer oxygen atoms than a sulfite ion does.
answer
F, more
question
In naming ionic compound, the cation is named first.
answer
T
question
In naming a monatomic anion, the suffix -ide is used.
answer
T
question
The prefix per- is used in naming the anion with the most oxygen atoms.
answer
T
question
The anion that has the formula ClO^-1
answer
hypochlorite ion
question
Where does a subscript that indicates the number of atoms appear, relative to a chemical symbol in a formula?
answer
to the lower right
question
What is the formula of calcium phosphate, which is made up of ions Ca^+2 and PO4^-3?
answer
Ca3(PO4)^2
question
For a monatomic ion, is equal to the charge
answer
oxidation number
question
A charged particle containing more than one atom
answer
polyatomic ion
question
A charged particle containing only one atom
answer
monatomic ion
question
A polyatomic ion composed of an element bonded to at least one oxygen atom
answer
oxyanion
question
Shows the simplest ratio of ions in an ionic compound
answer
electron sea model
question
When a double covalent bond is formed, two electrons are shared.
answer
F, four
question
In a pi bond, electrons are shared in an area centered between the two bonding atoms.
answer
F, sigma
question
There is a(n) indirect relationship between bond energy and bond length.
answer
F, direct
question
Flourine exists as a diatomic molecule because the shared pair of electrons enable each atom to form an octect.
answer
T
question
According to the octect rule, most atoms that bond covalently achieve the electron configuration of a ______.
answer
noble gas
question
Which of the following indicate that a bond is strong?
answer
high bond dissociation energy and short bond length
question
In the formation of a covalent bond, electrons are
answer
shared
question
Which of the following elements normally exists in the form of diatomic molecules
answer
nitrogen
question
Four electrons are shared in a ________.
answer
double covalent bond
question
Which of the following molecules contains only sigma bond?
answer
methane
question
Which of the following molecules contains a triple bond?
answer
nitrogen
question
How pi bonds are there in a triple bond?
answer
two
question
Which of the following molecules would be expected to have the greatest dissociation energy?
answer
N2
question
Any bond in which there is electron sharing
answer
covalent bond
question
The particle formed when two more atoms bond covalently
answer
molecule
question
Reactions that occur when more energy is released forming new bonds than is required to break bonds in the intial reactants
answer
exothermic
question
A kind of bond in which electrons are shared in an area centered between two atoms
answer
sigma bond
question
A kind of bond formed by overlap of parallel orbitals
answer
pi bond
question
Reactions that occur when more energy is required to break existing bonds in reactants than is released when new bonds form in the product molecules
answer
endothermic
question
In naming a binary compound, the prefix used to indicate the presence of four atoms of a given kind is quadri-.
answer
F, tetra
question
The suffix for an oxyacid that contains an anion ending in -ite is -ous.
answer
T
question
Hydrochlric acid is an example of an oxyacid.
answer
F, binary acid
question
In a chemical name, the prefix used to indicate the presence of two atoms of a given kind is bi-.
answer
F, di
question
The prefix hydro- is used in naming binary acids.
answer
T
question
Any acidic compound that contains oxygen
answer
oxyacid
question
Resonance is a condition that occurs when only one valid Lewis structure can be written for a molecule.
answer
F, more than
question
Resonance structures differ only in the number of the electron pairs.
answer
F, position
question
In Lewis structures, hydrogen is always a terminal atom.
answer
T
question
In the carbon dioxide molecule, the central atom is a carbon atom.
answer
T
question
In the compound BH3, the boron atom has more has more than an octect of electrons.
answer
F, less
question
Which of the following is an exception to the octect rule?
answer
NO
question
A model that shows how atoms are arranged in a molecule.
answer
structural formula
question
A condition that occurs when more than one valid Lewis structure can be drawn for a molecule
answer
resonance
question
A kind of bond in which one of the atoms provides both electrons for sharing
answer
coordinate covalent bond
question
The VSEPR model is used to determine the size of a molecule.
answer
F,shape
question
The VSEPR model is based on an arrangement that minimizes the repulsion of shared and unshared electron pairs around the central atom.
answer
T
question
The VSEPR model is based on the idea that in a molecule, nuclei repel each other as much as possible.
answer
F,electrons
question
Predict the shape of a molecule of nitrogen trifluoride(NF3).
answer
trigonal pyramidal
question
The creation of a set of new,identical orbitals bye the rearrangement of valence electrons within an atom is called _________.
answer
hybridization
question
In a linear molecule shape, the bonding electrons will have a maximum separation of ____________.
answer
180
question
A model used to determine molecular shape
answer
VSEPR model
question
The combining of orbitals in an atom to form new, identical orbitals
answer
Hybridization
question
The greater the electronegativity difference is between two bonding atoms, the more ionic the bond tends to be.
answer
T
question
The examples of covalent network solids are praffin and quartz
answer
F,Diamonds
question
The tendency of an atom in a compound to attract electrons
answer
Eletronegativity
question
A kind of bond in which there is unequal sharing of electrons
answer
polar covalent
question
The heat and light given off when butane burns is evidence of a physical change
answer
F,chemical
question
A number written in front of a chemical formula
answer
coefficent
question
A statement that uses chemical formulas to show the identities and relative amounts of the substances involved in a chemical reaction
answer
chemical equation
question
A starting substance in a chemical reaction
answer
reactant
question
A substance formed during a chemical reaction
answer
product
question
When an acid is added to silver sulfide, gas bubbles that smell like rotten eggs are released. How do you know that a chemical reaction has occurred?
answer
A gas is given off, and a change in odor occurs
question
When magnesium metal is added to a zinc sulfate solution, a reaction occurs because magnesium is a more active metal than zinc.
answer
T
question
When a lead(IV)nitrate solution is mixed with a sodium iodidesolution, solid lead(IV)iodide and aqueous sodium nitrate form in a single-replacement reaction.
answer
F,double-replacement
question
In an aqueous solution, the solvent is always water
answer
T
question
Identify the type of chemical reaction shown below:2C2H6(g)+7O2(g)->4CO2(g)+6H2O(g)
answer
Combustion
question
Identify the type of chemical reaction shown below:CO2(g)+CaO(s)->CaCO3(s)
answer
synthesis
question
Identify the chemical reaction shown below:2H2O2(l)->2H2O(l)+O2(g)
answer
decomposition
question
Identify the type of chemical reaction shown below:2KOH(aq)+H2SO4(aq)->K2SO4(aq)+2H2O(l)
answer
double-replacement
question
Identify the type of chemical reaction shown below: Mg(s)+2AgNO3(aq)->2Ag(s)+Mg(NO3)2(aq)
answer
single-replacement
question
A reaction in whicha compound breaks down into two or more elements or new compounds
answer
decomposition reaction
question
A solid produced during a chemical reaction in a solution
answer
precipitate
question
A reaction in which oxygen combines with a substance and releases heat and light energy
answer
combustion reaction
question
A reaction in which the atoms of one element replace the atoms of another element in a compound
answer
single-replacement reaction
question
A reaction involving the exchange of positive ions between two compounds dissolved in water
answer
double-replacement reaction
question
The process by which the atoms of one or more substance are rearranged to form different substances
answer
chemical reaction
question
A reaction in which two or more substance react to produce a single product
answer
synthesis reaction
question
The liter is the SI base unit used to measure the amount of a substnace.
answer
F,mole
question
Chemists use the mole as the unit to represent the number of representative particles in a sample of a subsance
answer
T
question
One mole of any substnace contain 6.02*10^23 representative particles of that substance.
answer
T
question
Avogadro's number is a very small number because its purpose is to count very small particles
answer
F,large
question
There are 6.02*10^23 formula units of methane (CH4) in 0.8500 mol CH4.
answer
F,5.12*10^23
question
One mole of water contains 6.02*10^23 representative particles of that substance.
answer
T
question
A mole of potassium chloride (KCl) contains 6.02*10^23 _________.
answer
formula units KCl
question
SI base unit used to measure the amount of a substance
answer
mole
question
6.02*10^23
answer
Avogrado's number
question
The mass of a sodium-23 atom is 23 amu; therfore, the mass of one mole of sodium-23 atoms is exactly 23 kg.
answer
F, g
question
Two moles of indium(In) has a mass of 229.64g. (The molar mass of indium is 114.82g/mol.)
answer
T
question
The percent composition of carbon is equal to carbon's atomic mass and has the units g/mol.
answer
F, molar mass
question
The SI unit of molar mass is the _____.
answer
gram/mole
question
Which compound has the smallest molar mass?
H20,CO,H2O2,CO2
answer
H20
question
Mass in grams of one mole of any pure substance
answer
molar mass
question
One mole of beryllium aluminum metasilicate(Be3Al2(SiO3)6) contains 1 mol Si atoms.
answer
F, 6
question
How many moles of oxygen atoms do 1.5 moles of CO2 contain?
answer
3 mol
question
Which of the following statements about the reaction represented by the following balanced chemical equation is false?
2H2(g)+O2->2H2O(g)
answer
The number of reactant molecules equals the number if product molecules.
question
How many mole ratios can be derived from the following balanced chemical equation?
CH4(g)+2O2(g)->CO2(g)+2H2O(g)
answer
12
question
Stoichiometry is based on the law of conservation of
answer
mass
question
In a balanced chemical equation, the number of individual particles and the numbers of moles of particles are represented by the
answer
coefficients
question
Mole ratios for a reaction are obtained from the
answer
balanced chemical equation
question
In the decomposition reaction of compound AB into substances A and B, what is the number of mole ratios?
answer
6
question
A(n) ________ is a ratio between the number of moles of any two substances in a balanced chemical equation.
answer
mole ratio
question
The study of the quantitative relationships among the amounts of reactants used and the amounts of products formed by a chemical reaction is called ________.
answer
Stoichiometry
question
What is the first step in solving any stoichiometric problem?
answer
Balance the chemical equation representing the reaction.
question
Calculating the mass of a reactant and product from the number of moles of another product or reactant in a chemical equation is an example of a _______.
answer
mole-to-mass conversion
question
Gay-Lussac's law states that the volume and kelvin temperature of a contained gas are directly proportional if pressure is constant.
answer
F, Charles's Law
question
Boyle's law states that the pressure and volume of a contained gas are inversely proportional if temperature is constant.
answer
T
question
Assuming all other variables remain constant, when you sqeeze a balloon, the pressure inside the balloon decreases.
answer
F, increases
question
Which equation shows Boyle's law?
answer
P1V1=P2V2, at constant temperature
question
Which equation shows Charles's law?
answer
V1/T1=V2/T2 at constant pressure
question
Which equation shows Gay-Lussac's law?
answer
P1/T1=P2/T2 at constant volume
question
The pressure of a given mass of gas varies directly with the kelvin temperature when the volume remains constant.
answer
Gay-Lussac's law
question
The volume of a given amount of gas held at a constant temperature varies inversely with the pressure.
answer
Boyle's law
question
The volume of a given amount of gas is directly proportional to its kelvin temperature at constant pressure.
answer
Charles's law
question
_______ states that the volume of one mole of any gas at STP is 22.4 L.
answer
Avogrado's principle
question
Which of the following are the conditions known as standard temperature and pressure(STP)?
answer
0C and 1.00 atm
question
In the combined gas law, this variable is always constant.
answer
number of moles of gas
question
In the combined gas law, this variable is inversely proportional to pressure.
answer
volume
question
In the combined gas law, this variable is directly proportional to volume.
answer
temperature
question
In the combined gas law, this variable is inversley proportional to volume.
answer
pressure
question
Which equation shows the combined gas law?
answer
P1V1/T1=P2V2/T2
question
What volume will one mole of a gas occupy under standard temperature and pressure?
answer
22.4 L
question
Equal volumes of gases at the same temperature and pressure contain equal numbers of particles.
answer
Avogrado's pronciple
question
One mole of any gas will occupy a volume of 22.4 L at STP.
answer
molar volume
question
Temperature, pressure, and volume are related for a fixed amount of gas.
answer
combined gas law
question
Consider the ideal gas law and the ideal gas constant. What information do you need in order to determine the volume of the gas if you know the pressure, the temperature, and the ideal gas constant?
answer
the number of moles of the gas
question
Real gases deviate most from ideal gas behavior at ________.
answer
extremely high pressure and low temperature
question
Which equation shows the ideal gas law?
answer
PV=nRT
question
What variable is mentioned in the ideal gas law that is assumed to be constant in the other gas laws?
answer
number of moles
question
R represents the relatonship among pressure,volume,temperature, and the number of molecules of gas present.
answer
ideal gas constant
question
The physical behavior of an ideal gas can be expressed in terms of the pressure,volume,temperature, and number of moles of gas present.
answer
ideal gas law
question
A substance that dissolves in a solvent is said to be soluble in that solvent.
answer
T
question
Two polar liquids will most likely be immiscible when mixed together.
answer
F,miscible
question
Shaking and stirring decreases the rate of solvation by moving the solvated particles away from the contact areas more quickly.
answer
F,increases
question
A solution may exist a gas,a liquid or a solid depending on the state of the solvent.
answer
T
question
The most common solvent amongF, liquid solutions is ethanol.
answer
F, water
question
The most common solvent among liquid solutions is ethanol.
answer
F, water
question
Nonpolar solvents are more soluble in nonpolar solvents.
answer
T
question
A supersaturated solution contains less dissolved soluter than a saturated solution at the same temperature.
answer
F, more
question
A dilute solution contains a small amount of solute relative to the solute's solubility.
answer
T
question
After adding a small crystal of copper sulfate to an aqueous solution of copper sulfate, a large amount of copper sulfate precipitate forms. Which of the following terms describes the original solution?
answer
supersaturated solution
question
Which of the following statements explains the solubility of ionic substances in water?
answer
Water molecules are polar
question
The overall energy change that occurs when a solution forms
answer
heat of solution
question
The process of surrounding solute particles with solvent particles to form a solution
answer
solvation
question
The process of surrounding solute particles to form a solution
answer
solvation
question
The statement that the solubility of a gas in a liquid is directly proportional to the pressure of the gas above the liquid
answer
Henry's law
question
A saturated solution is more dilute that an unsaturated solution
answer
f, concentrated
question
Molarity is more likely to be affected by temperature than is molality
answer
T
question
Molar solutions are calculated and expressed in grams per liter
answer
f, moles per liter
question
What term describes a solution in which the dissolved solute is in equilibrium with the undissolved solute?
answer
dilute solution
question
A measure of how much solute is in a specific amount of solvent or solution
answer
concentration
question
The ratio of the number of moles of solute in solution to the total number of moles of solute and solvent
answer
mole fraction
question
The colligative properties of a 1M aqueous solution sodium chloride will be different from the colligative properties of a 1M aqueous solution of potassium bromide.
answer
f, the same as
question
The boling point elevation is the difference between a solute's boiling point and a pure solvent's boiling point.
answer
f, solution's
question
The lowering of the vapor pressure of a pure solvent when a solution is formed is a colligative property
answer
t
question
A 1m solution of a nonelectrolyte will have a lesser effect on the colligative properties of its solution than a 1m solution of an electrolyte on the colligative properties of its solution.
answer
t
question
Boiling point depression is the temperature difference between a solution's and a solvent's boiling point.
answer
f, boiling point elevation
question
The diffusion of solvent particles across a semipermiable membrane from areas of lower solute concentration to aras of higher solute concentration
answer
osmosis
question
The amount of additional pressure caused by water molecules moving into a solution
answer
osmotic pressure
question
Colloids are heterogenteous mixtures that contain particles between 1 nm and 1000 nm in diameter.
answer
t
question
The dispersing medium for an aerosol is a gas.
answer
t
question
Heating may interfere with the electrostatic layering of a colliod, causing the particles to form a solution.
answer
f, settle out
question
Attractions between the dispersed particles and the particles of the dispersing medium of a olloid produces magnetic layers that keep the dispersed particles from settling out.
answer
f, electrostatic
question
The ability to be seperated by paper filtration is a characteristic of which mixture?
answer
suspension
question
A mixture with particles that settle out if undisturbed
answer
suspension
question
The erratic movement of colloid particles
answer
Brownian motion
question
A heterogeneous mixture of intermediate size
answer
colloid
question
The scattering of light by dispersed colloid particles
answer
Tyndall effect
Get an explanation on any task
Get unstuck with the help of our AI assistant in seconds
New