Engineering Drawing Essay Example
Engineering Drawing Essay Example

Engineering Drawing Essay Example

Available Only on StudyHippo
  • Pages: 14 (3624 words)
  • Published: December 20, 2017
  • Type: Essay
View Entire Sample
Text preview

Five hypotheses, focused on the types of drawings, their necessity in mechanical problem solving, and heir relation to the external representation medium, are presented and supported. Support Is through referenced studies In other domains and the results of protocol studies performed on five mechanical designers. Videotapes of all the marks-on- paper made by designers in representative sections of the design process were studied in detail for their type and purpose. The resulting data is supportive of the hypotheses.

It is in considering how these sketches help an idea take form that gives a hint that drawing's role in engineering is more than Just to archive a concept or to communicate with others. Understanding the use of both drafting and sketching in design is important to help formulate the future development of Computer Aided Design or Drafting (CAD) systems. As CAD ev

...

olves and becomes more "intelligent," the question of what attributes these systems must have becomes more important. In the past CAD system attributes have primarily been driven from developments in the computer industry.

It is only through understanding drawing's importance in the design process that these systems can be based on design needs. (l) Additionally, the pressures of CAD tool development, faculty time demands, and course expenses cause academic institutions to reevaluate the content of their "graphics" courses. Understanding drawing's importance in the design process helps establish what skills need to be taught to engineers during their training. This paper is organized by first, in Section II, clarifying the types of drawings used in mechanical design.

In research, to be described in Section V, we have broken down these marks into two main groupings

View entire sample
Join StudyHippo to see entire essay

support notation and graphic representations. Support notation includes textual notes, lists, dimensions (including leaders and arrows) and calculations. Graphic representations include drawings of objects and their functions, and plots and charts. Mechanical design graphic representations are often scale drawings made with mechanical instruments or CAD computer systems. These drawings, made in accordance with a set of widely accepted rules, are defined as having been drafted.

Sketches, on the other hand, are defined as "free hand" drawings. They are usually function. A differentiation must be made between the act of graphic representation and the medium on which it occurs. The medium, whether it be paper and pencil, a computer stylus on a tablet, chalk on a blackboard or other medium may put interface extractions on the representation. The following discussions are concerned with what is being represented, not with how the representation is made. However, the discussions point to the medium's restriction on representation and the need for improved interfaces.

Another aspect of drawings to be considered is the level of abstraction of the information to be represented. During the design process, the design is refined from an abstract concept to a final, detailed, drafted design. This can be clearly seen in an example taken from one of our studies described in Section V. In this study the signer was developing an assembly to hold three batteries for a clock/calendar in a computer. Figure 1 is a compilation of all the sketches and drawings one subject made during the development of a battery contact in this design.

The number under each graphic image is the percentage of the way through the design when the representation was

made. The component is refined from a sketch that contains primarily functional information to a refined, scale drawing of the final form. The first sketch in Fig. 1 shows two contacts (represented as circles) and a connection between them for current flow (represented as a line). The symbol here is clearly functional. Figure 1 . The evolution of a battery contact - total protocol time of 8 hours and 34 minutes.

Even though a good percentage of an engineer's graphic representation is informal sketching, drafting is the focus of most engineering training and the strength of CAD systems. On the other hand, most engineers receive no formal training in sketching. It is often assumed to be some natural ability. Three typical texts used in teaching undergraduate "mechanical" drawing were reviewed [1, 2, 3]. Each of these presented only a few pages of information on sketching. Additionally, CAD systems do not support sketching in any meaningful way.

For the purposes of this paper, the term CAD is defined as the use of interactive computer graphics to help solve a mechanical design problem. Current CAD tools aid the mechanical design process in four ways: as an advanced drafting tool; through assisting in the visualization of hardware and data; by improving data organization and communication; and through being used as a pre- and post-processor for computer based analytical techniques such as finite element analysis, weight and mass properties, cinematic analysis, etc. For all these uses, the "design" must be the "D" in CAD means drafting. Ill.

This, in effect, helps establish an agenda of design tasks left to accomplish. 6. To act as an extension of the designer's

short term memory. Designers often unconsciously make sketches to help them remember ideas that they might otherwise forget. It was realized that these observations were both overlapping and incomplete. In particular, based on the data and readings in the cognitive psychology literature, we felt that the last item was potentially much richer than stated. Thus these observations have fostered five hypotheses. Each hypothesis is presented below allowed by support from the literature.

The mechanical design data in support of these hypotheses is in Section V. Hypothesis 1 . Drawing is the preferred method of external data representation by mechanical engineering designers. Designers represent data both internally, in their minds, and externally on paper, a computer screen or other media. It is fairly obvious that designers like to draw in these mediums and prefer a picture to a written description of an object. It is important to understand why drawing representations are preferred over other forms such as text or propositions (if-then rules).

In Why a Diagram is (Sometimes) Worth Ten Thousand Words , by Larkin and Simon [6], the authors explore the use of diagrams in problem solving. Here a "diagram" is a drafted, schematic drawing representing the objects in a physics problem. In this (graphical) representations and their effect on problem solving are compared. In comparing these the authors conclude that: 1 . Diagrams can group all information that is used together thus avoiding large amounts of search for needed elements. Text only indexes to the next element in the sentence list (the adjacent piece of information) while diagrams have many adjacent elements. . Diagrams explicitly preserve information about geometry and topology, whereas text

is only serial in nature. This feature of diagrams allows for easy indexing of information to support computation processes. However, text preserves the temporal or logical sequence of information. This is lost in diagrams. 3. Diagrams use location to group information about a single element, avoiding the need to match symbolic labels. Diagrams automatically support a large number of perceptual inferences; the information can be indexed in a variety of manners.

It seems reasonable that these conclusions, made about diagrammatic presentations, can be extended to all graphical representations. Based on Larkin and Simony's conclusions it is easy to see why, in the complexity of mechanical design, drawings are preferred over text. Hypothesis 2. Sketching is an important form of graphical representation serving needs not supported by drafting. Later in this paper we will analyze all the marks-on-paper made by a small group of engineering designers. Their drawing marks will be classified as either free hand (sketching) or drafting marks.

The hypothesis above states that the sketches have a role that more formal drafting cannot fill. Dan Herbert in Study Drawings in Architectural Design: Applications for CAD Systems [7] considers the use of sketches (study drawings) in the solution of architectural design problems. He defines "study drawings" as "informal, private drawings that architectural designers use as a medium for graphic thinking in the exploratory stages of their work. " Architects often make these study drawings in the borders of or adjacent to their formal drawings.

In his paper Herbert conjectures about the properties of sketches that affect the design process. These properties form the basis for his theory of the use of sketches in design. In

Herbert theory, sketches are used because they provide an extended memory for the visual images in the mind of the designer. Since sketches can be made more rapidly than formal drawings, they allow for more facile manipulation of ideas. Furthermore sketches allow the information to be represented in various forms such as differing views or levels of abstraction.

Thus he calls sketches graphic metaphors for both the real object and the formally drafted object under development. In fact thoughts lead to the third hypothesis. Hypothesis 3. Drawing is a necessary extension of visual imagery used in mechanical design. It is a necessary extension of a designer cognitive capability for all but the most trivial data representation, constraint propagation, and mental simulation. This hypothesis states that without data representation on media external to the designer there can be no design of substantive problems.

Anecdotal support for this hypothesis is evident in asking a designer to design something and observing him/ her reach for a pencil or chalk. In the next section of this paper we will discuss a model of information processing in human problem solving that gives some scientific support to these anecdotal observations and to the hypothesis. In this model, drawings are an extension of the humans' limited ability to visualize objects in their mind. The limitation of cognitive ability leads to the forth hypothesis. Hypothesis 4. Drawings require transformation from the designer's memory to the extended memory medium.

The nature of the transformation is dependent on the characteristics of the medium. The manner in which humans represent information in their memory is still a subject of much debate and research. Whatever the form

of this internal representation, it is potentially different from the representation made externally on paper, in a CAD system, or through some other media. The transformation between these two media is one of both correspondence and implementation. Correspondence is the transformation between the internal and the external vocabularies.

If the designer has a visualized 3-D object in his/her mind and wants to represent the object externally, it can be transformed into an isometric, orthographic, or other 2-D representation and drawn on paper or with a 2-D CAD tool, or it can be transformed to Boolean primitives and represented on a solid modeling tool. Further, depending on the medium chosen, there is the additional necessity to transform the image to meet the requirements of the implementation. The cognitive process for drawing a line with a pencil is different from that for specifying the end points for a CAD representation of the line.

Both the research of Larkin and Simon and of Herbert focus on correspondence. There is no literature known to the authors concerning the effect of implementation on the cognitive load of the designer. Even though the exact form of human memory is still unknown, it is generally discussed by psychologists in terms of cognitive units or chunks of data. The nature of these cognitive units, which will be discussed in the next section, leads to the fifth and final hypothesis. Eaters) used in mental image formulation. Thus, designer's cognitive information organization is interdependent with drawing's characteristics.

This hypothesis is double edged. It seems obvious that the content and structure of drawings is dependent on the mental image and how it is formed (its cognitive

chunks). It is debatable whether or not the mental images are influenced by the drawings. This issue will be addressed again later. 'V. A COGNITIVE MODEL OF MECHANICAL DESIGN In an earlier description of designers as information processors [8], we presented Figure 2 as the environment in which the design takes place. This figure is based on the model developed by Newell and Simon [9] and called the Information Processing System (UP'S).

The figure can be viewed as a "map" of the locations in which information about the design may be stored. It is divided into an internal work space (inside the mind of the designer) and an external workspace (outside the mind of the designer). Within the designer, there are two locations corresponding to the two different kinds of memory: short-term memory (STEM) and long-term memory (LET). There is also a "processor" that is responsible for applying operators and controlling the design process. In Oilman, Dietrich and Stauffer [8], ten operators were identified that characterize the problem solving in mechanical design.

External to the designer there are many "design state storage locations" including graphical representation media such as pieces of paper and CAD tools, as well as other sources such as textual notes, handbooks and colleagues. Thus, the design or some feature of the design can only be represented in three locations: STEM, LET, and the so-called, external memory. Each "location" has certain properties that affect how it can be used in design. In order to support the hypotheses about the importance of drawing in the mechanical design process, this model needs to be discussed in more detail.

To discuss drawing's role in the

mechanical design process, the characteristics of the STEM, the LET, and the information flow between them and the external environment will be developed. This detail is based on Newell and Simony's model, the extensions of it to visual imagery by Closely [10, 11, 12] and the effort to codify it by Anderson [13]. It must be realized that the contents of the model given here are not fully agreed to in the cognitive psychology community, but they are certainly secure enough to provide a basis for discussing the role of drawing in mechanical design. . 1 Short Term Memory information we are aware of, our conscious mind. All design operations (e. G. Visual perception and drawing creation) are made on information that is brought into short- term memory. Unfortunately, STEM has limited capacity. Studies have shown that it is limited to approximately seven cognitive units or "chunks" of information [9]. Although limited in capacity, the STEM is a fast processor with processing times on the order of 100 messes [17]. In the view of Closely, one function of the short term memory is as a visual buffer 12].

In this capacity it is considered a hard-wired, special purpose, short term buffer that evolved from the need to process information from the eyes. Thus, this buffer is viewed as a coordinate space with limited spatial extent, more clarity toward the center, and the image fading without regeneration effort. The visual buffer supports images derived from the eyes during perception, and from both the eyes and the long term memory during idea generation and manipulation. 4. Long Term Memory The long-term memory, on the other hand, has

essentially infinite capacity, but access is slow (from 2 to 10 seconds per chunk). Access to long-term memory is also not direct. Instead, memories must be triggered by some cue or retrieval strategy based on information in short-term memory. During design, parts of the design state are stored in long-term memory. These are relatively easy to cue because, at any time, currently important parts of the design state are in short-term memory and can act as pointers for the knowledge in the long-term-memory.

In terms of visual imagery, according to Closely there are two different types of information stored in the long term memory: facts about objects (including size of objects, how they are put together, names of subordinate categories, their function, etc. ) and encodings of the literal appearance of the object (list of coordinates where points should be placed in the visual buffer). Sheppard [14] argues that there may not be a concrete or "first order" isomorphism between an external object and the corresponding representation. He proposes a "second order" isomorphism in which functional relations among objects are modeled and stored.

It is clear that the information about images contains more than the literal appearance and that a propositional memory must be included as part of the visual image. . 3 Cognitive Units The contents of the cognitive units processed in the L TM and STEM are not exactly clear. Anderson [1 3], in his effort to build a computer simulation of human information processing, utilizes three types of data representations for these units: spatial images, textual data and propositions. It will be shown that the spatial representation view of memory is especially

important in considering the form- oriented field of mechanical engineering design. Encode information about mechanical objects in their memory. There has been much conjecture about this however as the chunks of data, more commonly referred to in engineering design as the design features, are the basic building blocks of human design organization. Thus if a design is to be represented in a manner that is most easily communicated to/from a human designer, then the information should be encoded in features that are familiar to him. Current CAD systems use features that are made of geometric primitives such as lines, arcs, solids and icons.

These are the features designers are taught to use, but it is not clear that these are the way the information is best organized in their memory and most easily indexed. This gives sis to the following questions. Where do these features come from? Is it that designers have a natural set of features in their heads or is the patterning developed through their education? The only windows that exist to study the chucking of objects in a designer's head is through his/her representation of these features as written text, words, drawings or gestures.

Features used by humans to represent geometry and topology are often not easily represented textually or verbally, but can be graphically represented quite easily. For example, novice chess players when asked to recall the position of chess en on a board did so on a man-by-man basis. However, experts recalled patterns of men, larger, more complex features than the novice [15]. These chunks had no formal "names" that could be represented as a simple written or spoken term,

but they could be graphically represented by the positions on the board quite easily.

Similar experiments in the domain of architecture [16] resulted in chunks that, although easily represented graphically, could only be awkwardly represented textually as, for example, "A string of exterior walls" or "Two wall segments with windows forming an exterior corner of a square space". The only experiment of this nature performed on mechanical engineers was performed by Waldron and Waldron [18]. In this experiment novice (undergraduate students), intermediate (graduate students) and experts (practicing engineers) were shown an assembly drawing for a short period of time.

The drawing was then covered and the subjects asked to reproduce it. By observing the video taped protocols of the subjects performing this task it was evident that the novices remembered line segments, the intermediate subjects remembered objects such as gears and the experts remembered functional components embodying a large umber of physical objects. 4. 4 How the PIPS Model Supports the Hypotheses The above description is important to the understanding of the use of graphical representations in mechanical design as it gives insight into the correctness of the hypotheses put forward in Section Ill. Information from the long-term memory or manipulation in the short-term memory. Since the number of chunks of information the STEM can work with is limited and mechanical designs get complicated very rapidly, the short term memory forms a critical bottleneck for human designers. Additionally, as the STEM transforms Information so rapidly and the long term memory so slowly, only external representations made through transforming the image to graphic or textual representation can serve as added memory.

Since textual information is so

limited in characterizing form, graphic representation is the only reasonable memory extender for mechanical designers. This supports the first hypothesis. The second hypothesis, that sketches serve purposes not supported by drafting, has much to do with the speed of the representation. One purpose in making a graphic image in the external environment is so that it can be viewed, encoded in the STEM, ND parsed in a new way. In other words, rapid external image generation allows designers to "see" information differently than the way it was generated.

Thus the method of generating the external image must be rapid and flexible or it will slow down the cognitive processing. Since the STEM is so limited in capacity and mechanical design is so complex, drawings are needed in design as an extension of the visual imagery capability. Thus the PIPS model supports hypothesis three. Considering both hypotheses two and three, drawing both extends the capacity of the STEM and gives the capability of preparing the information for continued processing. The forth hypothesis stated that graphical representation is a metaphor for visual imagery and it requires transformation dependent on the medium.

It would be ideal if the medium image representation requirements exactly matched the image representation in the short term memory. In one sense this match always occurs in that, to some degree, the medium used formulates the image chunks that are stored in the long-term memory and later form a basis for generating and inspecting the image in short-term memory. The fifth hypothesis states that graphical representation both utilizes and determines design features. We have historically been constrained to two- dimensional media (e. . Pencil and

paper) and these have, to some degree, formed our representations. It is not clear how we encode and store three -dimensional objects. There is one argument that memory is object-centered and that the object can thus be manipulated as a solid model. This is countered by the argument that memory is viewer-centered and thus only the specific view stored in L TM can be used for generation or inspection [12]. Thus, the current state of cognitive research is not yet refined enough to support this hypothesis.

Get an explanation on any task
Get unstuck with the help of our AI assistant in seconds
New