Emc Grabs Procedure Essay Example

hacmp (AIX HACMP cluster) (Automatic Detection) Only collects log files. Module : ifs (EMC Infomover File System)(Optional) Collects configuration and log files for last 14 days. No known issues. Module : ift (EMC Infomover File Transfer)(Optional) Collects configuration and log files for last 14 days. No known issues. Module : im (EMC Infomover)(Optional) Runs both the ift and ifs modules above. No known issues. Module : inq (Automatic Detection) This is run by default to assist with automatic detection of Clariion, Symmetrix and third party Storage Arrays

Module : pp (Powerpath) (Automatic Detection) Will automatically detect whether PowerPath Volume Management features are in use, and invoke module ppvm (requires PP 4. x or later) Module : ppvm (EMC PowerPath Volume Manager) (Automatic Detection) No limitations known at this time. Module : sc (Sun Cluster 3. x) (Automatic Detection) Collects all information relating to Sun Cluster. Currently only version 3. x is supported. Module : sdmm (Symmetrix Data Mobility Manager) (Optional) No limitations known at this time Module : se (Solutions Enabler)(Automatic Detection)

A gatekeeper device should be visible to the host, for communication to the Symmetrix. The script will attempt to check for the existance of a gatekeeper, and it this check fails, you will have the option to abort the remainder of this module. Some commands may not return any output, depending on whether the relevant Solutions Enabler license has been installed. Module : svm (Solaris Volume Manager / Solstice(Online) Disk Suite (Automatic Detection) Supports SDS / ODS 4. x, even though configuration paths changed between 4. 2 and 4. 2. 1. Module : vcs (Veritas Cluster Server)

Automatic Detection : AIX, SunOS, HP-UX

and Linux Collects all information relating to Veritas Cluster Server. Module : vxvm (Veritas Volume Manager) Automatic Detection : AIX, SunOS, HP-UX and Linux then data will be collected Module : rp (Recover Point) (optional) Should be specified with '-o' switch on Solaris and AIX host. then logs will be collected in Recover Point Environment. Module : ZFS automatic Detection : SunOs Module : networks (network connection) This is run by default with all operating systems Collects Information of all devices connected to Host. No known problems. Module : networker (optional)

Collect networker files and information No known problems Return Codes : 0 - Success 1 - Failed to source emcgrab. main 2 - Unable to create temporary working directory 3 - EMCGrab Data Collection already running. Only a single instance is supported at any time. 4 - Script Aborted. Less than 25Mb of space detected on FileSystem. 5 - Failed to create output tarfile 6 - Override for non 'root' user operation failed. 7 - File and directory dependencies not found. Sending the report file to EMC: Once you have created your report file you need to send it to EMC Customer Service for analysis.

This is done easily and securely using EMC WebSupport. Go to WebSupport Case Management (Note: You must be a registered WebSupport user. Select the registration link to register) For a new support case select 'Create a Case' and complete the simple step-by-step creation process. Once you submit your case you will have the opportunity to upload your EMC Grab file to your case using the 'Attachments' functionality. For an existing Support case, locate your case by using the 'Quick

Case Search' or 'My Open Cases' portlets or by using the 'Case Query' functionality in 'Case Management. Select the 'Attachments' tab and upload your file. Note: You may also use EMC's ftp site if WebSupport is not available.