Basic Firearms Study Guide

74 test answers

Unlock all answers in this set

Unlock answers 74
question
On a hot range, shooters should maintain a ?
answer
Loaded weapon at all times and should have several loose magazines in their pockets to add to magazines between strings of fire.
question
A squib load can be detected by subdued report and ?
answer
Recoil
question
Loading and Unloading at the Firearms Training Center will be done at ??
answer
A designated loading/unloading area or at the direction of a range officer.
question
The shotgun is ready to be carried in the police vehicle when you have made sure the ?
answer
Safety is on the right, breech closed, with 4 rounds in the magazine.
question
The ejection port of the Remington 870 shotgun is located on the ?
answer
Right side of the receiver, which is the exit point for fired shells, and is used for loading and unloading.
Unlock the answer
question
The safety is in the fire position on the Remington 870 shotgun when it is to the ?
answer
Left
Unlock the answer
question
The slide release on the Remington 870 shotgun is located on the?
answer
Front of the trigger guard
Unlock the answer
question
There are how many components in a pistol ammunition?
answer
4
Unlock the answer
question
During the stay position, the shooter should mentally ask themselves?
answer
Do I have the slack out of a trigger Do I have a second sight picture Can I hit target Do I need to fire additional rounds
Unlock the answer
question
If you have a stoppage during the qualification course you should?
answer
Clear the stoppage and continue firing if time permits.
Unlock the answer
question
The following are reasons for carrying a flashlight:
answer
Locate a suspect Identify a target Illuminate a target Enable you to use your sights
Unlock the answer
question
The large number of rounds carried in the semi-auto pistol is no substitute for ?
answer
Proper sight alignment Correct sight picture Smooth trigger press Focusing on the front sight
Unlock the answer
question
The basic safety rules given during the course of instruction are?
answer
Consider all guns to be loaded at all times Keep the muzzle pointed in a safe direction Keep your finger off the trigger and outside the trigger guard until your on target and ready to fire. be sure of your target and background
Unlock the answer
question
Disregarding the rule causes 95% of all accidental discharges ?
answer
Keep your finger off the trigger and outside the trigger guard until you are on target.
Unlock the answer
question
2 types of reloading of the pistol that is accomplished by holding the pistol at eye level or slightly below eye level so that you can keep your target within your visual field ?
answer
Combat and Tactical
Unlock the answer
question
In the steps of the draw sequence, the purpose of the \"stay position\" is to ?
answer
Stay on target if remain shots are needed
Unlock the answer
question
What failure cannot be a phase 1 stoppage
answer
Failure to extract
Unlock the answer
question
Tap, Rack, Assess will not clear and that usually cannot be corrected by the shooter by what stoppage?
answer
Phase 3 stoppages
Unlock the answer
question
A non-mechanical stoppage that can be quickly cleared is a ?
answer
Phase 1 stoppage
Unlock the answer
question
A non-mechanical stoppage that can be cleared but requires more time is a ?
answer
Phase 2 stoppage
Unlock the answer
question
The rounds in the magazine are forced upward by the magazine?
answer
Spring
Unlock the answer
question
When the slide rebounds forward, it peels the top round in the magazine off, and feeds it into the ?
answer
Chamber
Unlock the answer
question
The first step in cleaning your semi-automatic pistol is to render the weapon?
answer
Safe
Unlock the answer
question
Inside of the magazine box there is no use for
answer
Oil
Unlock the answer
question
Your duty weapon must be thoroughly cleaned at least ?
answer
Once a Month
Unlock the answer
question
After you cleaned your semi-automatic pistol, you should do ?
answer
A functions check
Unlock the answer
question
You should inspect and function check your semi-automatic pistol ?
answer
Once a week
Unlock the answer
question
The Sig recoil spring is assembled onto the recoil spring guide ?
answer
Small end first
Unlock the answer
question
A failure to feed is a ?
answer
Phase 1 stoppage
Unlock the answer
question
The most common failure to fire stoppage is ?
answer
An empty chamber
Unlock the answer
question
The master grip is assumed while the weapon is in the ?
answer
Holster
Unlock the answer
question
When properly gripped the web of the hand should be ?
answer
High on the backstrap of the weapon.
Unlock the answer
question
While qualifying on the range ?
answer
You may reload your magazines at any time, also is your responsibility to keep your weapon and magazines loaded during the qualification course.
Unlock the answer
question
It is best to do what to keep the extractor from being damaged?
answer
Load the chamber from the magazine
Unlock the answer
question
It is not recommended to us the same?
answer
Round repeatedly to load the chamber since damage is caused to the case rim when extracted.
Unlock the answer
question
A failure to eject is classified as ?
answer
Phase 1 stoppage
Unlock the answer
question
A failure to fire is classified as ?
answer
Phase 3 stoppage
Unlock the answer
question
When clearing a stoppage:
answer
Your finger should be outside the trigger guard.
Unlock the answer
question
What stoppages can be cleared by Tap,Rack,Asses ?
answer
Phase 1 stoppage
Unlock the answer
question
Which elements in the relationship between the front sight, rear sight, and the target which is referred as the sight picture, which of these are important?
answer
The Front Sight
Unlock the answer
question
When assisting to secure your weapon until the weapon is holstered?
answer
You should not use your off hand
Unlock the answer
question
While on the qualification or standard pistol course, what would disqualify the shooter?
answer
Failing to Decock the weapon
Unlock the answer
question
This practice will increase your gun handling and shot placement skills.
answer
Dry Fire
Unlock the answer
question
What is very important in shooting, but most often overlooked?
answer
The Mental Aspects
Unlock the answer
question
The average person requires 2000-4000 repetitions of a task to develop?
answer
Muscle Memory
Unlock the answer
question
The Harry's technique of light control involves holding the flashlight ?
answer
Parallel to firing arm in the off hand.
Unlock the answer
question
Maintain control of your flashlight:
answer
during reloads by placing it under the armpit of the weapon hand
Unlock the answer
question
A misfire occurs when the:
answer
Primer fails to ignite
Unlock the answer
question
What ammunition should be carried on duty?
answer
Approved factory ammunition
Unlock the answer
question
When each round is fired:
answer
the fired round is extracted and ejected as the slide is forced to the rear.
Unlock the answer
question
While doing a functions check on a pistol:
answer
Each magazine should be inserted to determine if it will cause the slide to lock back.
Unlock the answer
question
What is the most violated of the basic safety rule?
answer
Keeping the muzzle pointed in a safe direction
Unlock the answer
question
At the end of a stage fire:
answer
It is the best time to reload
Unlock the answer
question
The Remington shotgun will hold:
answer
4 shells in the magazine tube 1 shell in the chamber total of 5 shells.
Unlock the answer
question
The departmental issue shotgun issues:
answer
12 gauge shells restricted to 2 3/4 length
Unlock the answer
question
During the cycle of action of the department issue of the shotgun:
answer
The for-end is moved fully rearward, cocking the hammer and causing the fired shell to be ejected, and then forward, causing ta live shell to be chambered.
Unlock the answer
question
The main function of a shell lifter is:
answer
to feed the shells from the magazine into the chamber
Unlock the answer
question
The function of the slide release is:
answer
to release the action
Unlock the answer
question
what is located inside the loading port on the right and left and hold the shells in the magazines?
answer
Shell Stops
Unlock the answer
question
The 3 factors that mus be present to hit a moving target are?
answer
Front Sight Follow the movement Trigger Control
Unlock the answer
question
Moving the weapon in conjunction with the movement of the target is know as?
answer
Follow the movement
Unlock the answer
question
When tracking a moving target:
answer
the feet remain stationary, while the upper body turns at the waist to follow the movement of the target.
Unlock the answer
question
Leading the target is:
answer
Not necessary at distances of less than 15 yards.
Unlock the answer
question
When placing a weapon in the property room that has not been rendered safe, you must ?
answer
Make verbal notification to the property room personnel and attach a loaded weapon tag to the weapon.
Unlock the answer
question
Before operating any part of an unfamiliar firearm, you should?
answer
Know the Result
Unlock the answer
question
What is not rendering a weapon safe?
answer
Placing a foreign object between the hammer and frame of any weapon that is cocked.
Unlock the answer
question
What can be used to cover the trigger guard of a weapon that cannot be rendered safe to prevent contact the the trigger?
answer
Tape
Unlock the answer
question
When unloading a weapon in the field:
answer
you must follow the four basic safety rules
Unlock the answer
question
Psychological factors such as strong will and survival instinct or sheer emotion of rage or hate:
answer
can cause an injured individual to delay incapacitated and continue fighting.
Unlock the answer
question
Dry-fire practice of techniques in gripping and drawing a weapon:
answer
will increase your accuracy, speed and your ability to retain your weapon.
Unlock the answer
question
Jones v. Whittenberg University
answer
is the case law dealing with the firing of warning shots
Unlock the answer
question
The department has some Remington 870 shotguns with?
answer
2 3/4 chambers and some with 3 inch chambers in service at this time.
Unlock the answer
question
All parts of the Remington 870 is ?
answer
Interchangeable without hand-fitting
Unlock the answer
question
On a revolver:
answer
the live round is aligned with the chamber by the cylinder.
Unlock the answer
Get an explanation on any task
Get unstuck with the help of our AI assistant in seconds
New