4.0 Networking – Flashcards

You manage a small network with Windows 7 clients, multiple subnets, and servers. You want your computer to be able to resolve a host name for a server on your network to it IPv4 address. What should you do? (Select two. Each choice is a possible solution.)

Network Diagram [*]-------------66.11.177.12--(_)--10.0.0.204------------10.0.0.205--(_)--10.0.0.110------------[HostA] Key: [*] = Internet (_) = Router [HostA] = Computer You manage the small network that is connected to the Internet as shown in the graphic. You add Host A to the network. All hosts use manually-assigned TCP/IP values. The subnet where Host A resides uses a 28-bit subnet mask. Which TCP/IP configuration values should you choose for HostA? Choose: IP Address, Subnet Mask and Default Gateway

You have a small network with three subnets as shown in the graphic. IP addresses for each router interface are also indicated. You need to connect Wrk1_A to SubnetA and Wrk5_c to SubnetC. Which IP addresses should you use? (Select two.)

Your company has started the transition to IPv6. You need to configure records on the DNS server so that clients can submit a host name query and receive back an IPv6 address for the specified host. What should you do?

You mange a network with all Windows 7 clients. As part of your IPv6 migration strategy, you have implemented ISATAP on your network. You would like to test the communication of a client computer using ISATAP. What should you do?

You mange a network with all Windows 7 clients. As part of your IPv6 migration strategy, you have implemented Teredo on your network. You would like to test the communication of a client computer using Teredo. What should you do?

You manage a small office network with a single subnet. The network is connected to the Internet. All client computers run Windows 7. A single server runs Windows Server 2008 RS. Computers are not a member of a domain. Hosts use IPv6 addresses on the private network. all hosts on the private network are assigned host names such as Computer1, Computer2, etc. All computers use a DNS server at the Internet service Provider (ISP) to resolve hostnames for Internet hosts. You need to implement a solution so that hosts on your private network can resolve hostnames for other hosts on the private network. You want to implement the solution with the least amount of effort. What should you do?

You have installed a test network with one server and two workstations, all running IPv6. You have disabled Ipv4, and now what to test to make sure that the Ipv6 is used to communicate between hosts. You want to ping the link-local address for a host. What should you do?

You have a computer running Windows 7 Ultimate. You need to configure Windows Firewall to allow traffic for an application that dynamically opens multiple ports on an as-needed basis. What should you do?

You have several computers running Windows 7 Ultimate. The computers are members of a workgroup. you need to create many custom firewall rules on each computer. The rules must be specific for the Private network profile. You should complete the task with the least amount of effort as possible. What should you do? (Select two. Each answer is a complete solution.)

You have several computers running Windows 7 Ultimate. Corporate policy states that a specific connection-oriented application must be blocked from accessing the Internet. You must use Windows Firewall with Advanced Security to complete the task.

You manage a laptop computer that runs Windows 7. As part of your security auditing strategy, you would like the system to record packets that have been dropped by firewall rules on your computer. You want to record only the packets dropped on public interfaces. You do not want to record information about allowed packets. What should you do?

You have a computer running Windows 7 Enterprise. You need to change how Windows provides notifications when the firewall blocks a new program. Select the link that you would choose to make this change.

You have a computer running Windows 7 Professional. The computer is a member of a domain. The computer is used by several different users belonging to different groups. You have a custom application on the computer. you want to configure the firewall as follows: * Allow a specific port used by the application. * Open the port only for members of the Sales group. You want to make the change using the least amount of effort possible. What should you do?

You have a computer running Windows 7 Ultimate. The computer has both wired and wireless network connections. The wired connection is on the internal private network, but the wireless connection is a public connection. you need to allow help desk users to use Remote Assistance to help you across the wired network, but want to block any such access from the wireless network. you want to configure Windows Firewall to allow and deny access as described. What should you do?

You have a laptop running Windows 7 Enterprise. The laptop is used both in a public network and a private (work) network. The work network contains FTP servers which hold sensitive data. To protect the data, you need to ensure that the computer can connect to FTP servers only while it is connected to the private (work) network. What should you do?

You manage a Windows 7 computer connected to a business network using switches and multiple subnets. One day you find that the computer is unable to connect to the Internet, although it can communicate with a few other computers on the local subnet. You type ipconfig /all on the computer and see the following output: Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : mydomain.local Description : Broadcom network adapter Physical Address : 00-AA-BB-CC-74-EF DHCP Enabled : Yes Autoconfiguration Enabled : Yes IPv4 Address : 160.254.155.1 (Preferred) Subnet Mask : 255.255.0.0 Default Gateway : DNS Servers : What should you do?

You have a computer that runs Windows 7. Your company has started the migration to IPv6 on your network. You need to configure your computer with a static IPv6 address. What should you do?

You have a computer that runs Windows 7 connected to a domain network. One day you find that your computer cannot connect to any network resources. You run the Ipconfig command and find that the network connection has been assigned the address of 169.254.12.155 with a mask of 255.255.0.0. What should you do?

Your company has started the transition to Ipv6. You need to configure records on the DNS server so that clients can submit an IPv6 address and receive back the host name for that computer. What should you do?

You manage a Windows 7 computer connected to a business network using switches and multiple subnets. You connect a workstation to the 192.168.1.0/24 subnet. The workstation can communicate with some hosts on the private network, but not with other hosts. You run ipconfig /all and see the following: Ethernet adapter Local Area Connection: Connection-specific DNS Suffix : mydomain.local Description : Broadcom network adapter Physical Address : 00-AA-BB-CC-74-EF DHCP Enabled : No Autoconfiguration Enabled : Yes Ipv4 Address : 192.168.1.102(Preferred) Subnet Mask : 255.255.255.0 Default Gateway : 192.168.2.1 DNS Servers 192.168.2.20 What should you do?

You have a computer that runs Windows 7. Your network has just transitioned from using Ipv4 to Ipv6. Ipv6 configuration is performed automatically using information received by network routers. The network does not use a DHCPv6 server. Your computer is unable to communicate with a server named Srv1. A ping test to the server using its Ipv6 address works, but fails when you use its host name. What should you do?

You have a computer that runs Windows 7. Your company has started the migration to IPv6 on your network. Your network administrator tells you that the network is using stateless autoconfiguration. You need to configure your computer for IPv6 so it is correctly configured with the Ipv6 address, default gateway, and DNS server addresses. What should you do?

You have a computer that runs Windows 7. Your company has started the migration to IPv6 on your network. Your network administrator tells you that the network is using stateless autoconfiguration. You need to configure your computer for IPv6 so it is correctly configured with the IPv6 address, default gateway, and DNS server addresses. The computer is currently configured to get all IPv6 information automatically. What should you do?

You have a computer that runs Windows 7. Your network has just transitioned from using IPv4 to IPv6. IPv6 configuration is performed automatically using stateful DHCPv6. A DNS server on your network provides name resolution for IPv6. Your computer is having problems communicating on the network. You would like to receive new configuration information from the DHCP server as well as remove all old DNS entries in your local DNS cache. What should you do? (Select two. Each choice is a required part of the solution.)

You have just received a new laptop at work that you will use on your company network and at home. The company network uses dynamic addressing, while your home network uses static addressing. You connect the laptop to the company network and everything works fine. When you take your laptop home, you cannot connect to devices on your home network or the Internet. You run ipconfig on the laptop and receive the following output: Connection-specific DNS Suffix : IP Address : 169.254.22.74 Subnet Mask : 255.255.0.0 Default Gateway : You need to be able to connect to both the company network and your home network with the least amount of configuration and cost. What should you do?

You have a computer that runs Windows 7 connected to a domain network. After reconfiguring the static address of an internal Web server named WEB3, your computer can no longer connect to WEB3. However, other users are still able to connect to the same Web server. You need to be able to connect to the website on the WEB3 server. What should you do?

You have a laptop that runs Windows 7. The laptop uses IPv6. The network connection is configured to obtain an IPv6 address automatically. You need to see the IPv6 address that the network connection is currently using. What should you do? (Select two. Each choice is a possible solution.)

You have a laptop that runs Windows 7. The laptop uses DHCP for IPv4 addressing information. You need to see the IPv4 address, subnet mask, and DNS server addresses that the network connection is currently using. What should you do? (Select two. Each choice is a possible solution.)

You have two computers running Windows 7 named Comp1 and Comp2. Both Comp1 and Comp2 received their IP addresses from a DHCP server in the network, and accessed the Internet through a common default gateway. After several changes in the network infrastructure, Comp1 is the only computer with a connection to the Internet. In addition, Comp1 is now acting as the default gateway and is sharing its Internet connection with Comp2. On Comp2, you are unable to access the Internet. You use the ipconfig /all command and discover the IP address for the Local Area Connection is 192.168.0.25. What should you do?

You have two computers running Windows 7 named Comp1 and Comp2. Both Comp1 and Comp2 received their IP addresses from a DHCP server in the network, and accessed the Internet through a common default gateway. After several changes in the network infrastructure, Comp1 is the only computer with a connection to the Internet. In addition, Cmop1 is now acting as the default gateway and is sharing its Internet connection with Comp2. On Comp2, you are unable to access the Internet. You use the ipconfig /all command and discover the IP address for the Local Area Connection is 192.168.0.25 with a subnet mask of 255.255.255.0. What should you do?

You have a Windows 7 Ultimate laptop computer that you use both at home and in the office. The laptop has both an Ethernet and a wireless network connection. At home you have created a simple Ethernet network that connects your home computers to the Internet through a cable modem. A friend comes over to your house for some help configuring his new laptop computer. His computer has a wireless network adapter but not an Ethernet network adapter. He wants to connect his laptop through your network to the Internet to download some drivers. What should you do? (Select two. Each choice is a required part of the solution.)

You have a small wireless network with 10 client computers configured in a workgroup. You upgraded the firmware on two wireless devices so you can use a better security standard than WEP. Now you need to implement the new security standard. You need the greatest amount of security with the least amount of effort, and without replacing any of the wireless infrastructure. What should you do? (Select two.)

You have received a new Windows 7 Business edition laptop for use at work. You configure the wireless adapter to connect to the network. You also have a wireless network at home. You configure a second profile for your home network. For several weeks, the wireless connection works fine. Whether you are at home or at work, you can start your computer and make a connection without browsing for the list of available networks. One day you come in to work to find that you can't connect. You check with the network administrator, and he states that they have prevented the SSID of the company network from being visible. You need to make it as easy as you can to connect to the company wireless network now and in the future. What should you do?

You have a laptop computer that runs Windows 7. Your computer is configured to connect to the wireless network at work using a wireless profile named Company1. The profile is configured to connect using 802.11b. During a recent upgrade, your company has added an 802.11n wireless router. The router is configured to support 802.11n using one radio, and 802.11b/g with the other radio. You create a second profile on your computer for the 802.11n network. You notice that your computer is connecting automatically using 802.11b. You want the computer to connect first using 802.11n, and only use 802.11b if 802.11n is unavailable. What should you do?

You are configuring a small wireless network with 10 client laptops that require network access. You have configured a new wireless access point with an SSID that is not broadcasting. You have manually created a network profile on one computer, which successfully connects to the network. You would like to configure the network profile on the remaining clients with the least amount of effort. What should you do?

You want to connect a laptop computer running Windows 7 to a wireless network. The wireless network uses multiple access points and WPA2-Personal. You want to use the strongest authentication and encryption possible. SSID broadcast has been disabled. What should you do?

You have a computer running Windows 7 Professional. The computer is a member of a domain. You need to configure the wireless network card to connect to your network at work. The connection should use a user name and password for authentication with AES encryption. What should you do?

You have a laptop that runs Windows 7. The laptop has a built-in Ethernet and wireless network card. The wireless card stops working. You use the PCMCIA slot to add a wireless card to your laptop. After installing the wireless card, the adapter does not show in the list of available network adapters in the Network and Sharing Center. What should you do to troubleshoot the problem?

You have a new Windows 7 Ultimate computer with both a wired and a wireless connection. You want to configure a small wireless network at home. You install a router that connects your network to the Internet and which is the wireless access point. You have turned off SSID broadcast on the Internet router. You will connect devices using a preshared key. You need to configure your laptop to connect to the wireless network, and would like to use the most secure method available to you. What should you do? (Select two. Each choice is a required part of the solution.)