Chapter 9 + 10
Unlock all answers in this set
Unlock answersquestion
Max has been hired to take over the administration of an existing network. All servers run Windows Server 2012 R2 and all hosts run Windows 8.
answer
Configure the TCP/IP properties for the seven servers and all clients to receive IP addresses from the DHCP server.
question
The large block corporation has a network with three subnets. Network clients use Windows 8. All servers run Windows Server 2012 R2. A DNS server provides name resolution. Stacy has been asked to implement a DHCP solution for her network.
answer
Configure each host to Obtain DNS server address automatically. Configure each host to Obtain the IP address automatically.
question
You have a laptop that runs Windows 7. The laptop uses DHCP for IPv4 addressing information.
answer
View the status for the network connection. Click the Details button. Run the netsh command.
question
You have a single router with three subnets as follows: SubnetA = 50 hosts
answer
SubnetA = 255.255.255.192
question
You need to design a network that supports 275 hosts. You want to place all hosts in a single broadcast domain, and want to make sure you do not waste IP addresses.
answer
Place all hosts on the same subnet. Use a mask of 255.255.254.0 .
question
You have a single router with three subnets as follows: Subnet A = 60 hosts
answer
A = Subnet address 172.22.19.64 with mask of 255.255.255.192
question
You have a server connected to two networks: Subnet A uses a 26-bit mask.
answer
Change the IP address assigned to Wrk2.
question
You have a small network as shown in the image. You are unable to ping Wrk2 from Wrk1. What should you do to fix the problem?
answer
Change the subnet mask on Wrk1
question
you manager the network that is shown in the graphic. You have just added Host B to the network.
answer
IP address- 192.168.1.193 SubnetMask- 255.255.255.224 Default gateway- 192.168.1.221 DNS Server- 192.168.1.189
question
You manage a Windows 7 computer connected to a business network using switches and multiple subnets. You connect a workstation to the 192.168.1.0/24 subnet.
answer
Edit the IPv4 properties and change the default gateway.
question
You have a small network with three subnets as shown in the graphic. IP addresses for each router interface are also indicated.
answer
Wrk1_A = 192.168.111.62 Wrk5_C = 10.155.64.97
question
You manage a company network with multiple subnets. As part of a recent upgrade, you have upgraded all servers to Windows Server 2012 R2. Client systems run Windows 8.
answer
FC00 FD00
question
You manage a company network with multiple subnets. As part of a recent upgrade, you have upgraded all servers to Windows Server 2012 R2. Client systems currently run Windows 7 professional, with a few newer systems running Windows 8.
answer
In the network connection properties on each client, client select Obtain an IPv6 address automatically. In the network connection properties on each client, select Obtain DNS server address automatically.
question
You manage a small private network with three subnets as shown in the image. The App1 server on SubnetC runs only IPv6 and because of your company policy, it cannot be congigured with an IPv4 address.
answer
Configure Rtr1 as an ISATAP router.
question
You manage two small remote networks: one in portland and on in seattle. Both sites are connected to the Internet through a single Windows Server 2012 R2 server using NAT.
answer
Manually configured tunneling 6to4 tunneling
question
You manage a small private network with two subnets as shown in the image. Both Wrk1 and Wrk2 run Windows 8 and have been configured with IPv6 addresses.
answer
On the DNS server for the network, create an A record named ISATAP that point to Srv3
question
You manage the small network that is connected to the Internet as shown in the graphic. You add Host A to the network.
answer
IP address- 10.0.0.97 Subnet Mask- 255.255.255.240 Default Gateway- 10.0.0.110
question
You have a laptop that runs Windows 8. The laptop uses IPv6. The network connection is configured to obtain an IPv6 address automatically.
answer
Run the netsh command. View the status for the network connection. Click the details button.
question
You have a computer that runs Windows 7. Your company has started the migration of IPv6 on your network. Your network administration tells you that the network is using stateless autoconfiguration.
answer
Edit the itnernet Protocol Version 6 (TCP/IPv6) properties for the network adapter. Select Obtain an IPv6 address automatically and use the following DNS server addresses.
question
You manage a network with all Windows 7 clients. As part of you IPv6 migration strategy, you have implemented ISATAP on your netowrk.
answer
Ping the address beginning with FE80:
question
You manage a network with all Windows 7 clients. As part of your IPv6 migration strategy, you ahve implemented Teredo on your computer.
answer
Ping address beginning with 2001:
question
You are the assistant systems manager for your company's network. There are 600 workstations running windows 7 and windows 8.
answer
Delete all of the scopes and start over.
question
You are the administrator of what will become a large Windows Server 2012 network using the TCP/IP protocol. Currently the network consists of three Windows Server 2012 R2 computers, 25 windows 7 professional workstations and 25 windows 8 workstations as shown in the diagram.
answer
Configure each workstation to use DHCP. Install a DHCP server and configure a single scope.
question
Alberto administers a single DHCP server for his network of three subnets.
answer
Configure scope options for the server to deliver the DNS server value. Configure scope options for each scope to deliver the default gateway value.
question
You are installing DHCP in four subnets. Three of the subnets have Windows 7 desktop computers, and the fourth subnet has only Windows 7 latptop computers.
answer
Set up one scope for each subnet, and set the lease period as a part of each scope's configuration.
question
Mark is the system administrator for a network with a single Active Directory domain.
answer
Ask a member of the Enterprise Admins group to authorize the server.
question
You are the administrator for a large network. You have one location serving several thousand users. At present, your company has just finished an upgrade so, all 100 servers are running windows server 2012 R2.
answer
Manually configure the IP address on the Web server. Create an exclusion on the DHCP server. Configure the Web server to use DHCP. Create a reservation on the DHCP server.
question
Serey is the network administrator for a single domain network with 15 servers running Windows Server 2012 R2, 200 Windows 8 clients, and 10 UNIX workstations.
answer
Create a reservation for each UNIX workstation. Configure the workstations to receive IP addresses from DHCP.
question
You are the manager for the westsim.com domain. The network has a wingle subnet with five servers. all running windows server 2012 R2. The 100 Client computers all run Windows 8.
answer
On the DHCP server, delete the exclusion range.
question
Nadine is the systems administrator for a network with a single subnet.
answer
Authorize Srv-11
question
You are the administrator of a network with a single subnet. A single windows server 2012 R2 server on Subnet1 is the domain controller, DNS server, and DHCP server.
answer
Enable BootP forwarding on the router connecting Subnet1 to Subnet2 On Srv2, add teh Remote Access role with routing. In routing and remote access, configure the relay agent protocol.
question
The image depicts the network layout of NorthSim corporation. Currently, the network uses static IP addressing.
answer
Configure SRV2 as a relay agent
question
The network you manage has 200 workstations split into two network segments. Each segment has two servers, each running Windows Server 2012 R2.
answer
In Routing and Remote access, change the IP address configured for the Relay agent protocol.
question
You are the network administrator of a network with 90 work stations on a single subnet.
answer
On both servers, set the scope range to 194.172.64.10 to 194.172.64.254 . On SRV1, exclude addresses 194.172.64.206 to 192.172.64.254.
question
You are the network administrator for a single domain network with a single subnet. Server Prod2 is configured to provide DHCP services for the subnet.
answer
On Prod2,exclude addresses 192.168.1.151 to 192.168.1.250. On Prod4, create a scope with address range 192.168.1.51 to 192.168.1.250. On Prod4, exclude addresses 192.168.1.51 to 192.168.1.150
question
You are the network administrator for a single domain network with a single subnet. Server Prod2 is configured to provide DHCP services for the subnet.
answer
Configure an exclusion for addresses 192.168.1.51 to 192.168.1.210. Configure a scope with address range 192.168.1.51 to 192.168.1.250 .
question
You manage the westsim.com domain. All servers run the Windows Server 2012 R2 and all workstations run Windows 8. Salesmen issued laptops that the use to connect to the local network as well as dial in when they are on the road .
answer
On each laptop, configure an alternate IP configuration.
question
You have just received a new laptop at work that you will use on your company network and at home. The company network uses dynamic addressing, while your home network uses static addressing.
answer
Configure the alternate TCP/IP configuration.
question
You are the assistant systems manager of your small company's network, which includes about 2000 Windows 7 and Windows 8 workstations and five servers all running Windows Server 2012 R2. All workstations receive their IP assignments from a DHCP server.
answer
Reboot the DHCP server
question
You are the server administrator for the network shown in the first image. SRV2 is a domain controller that hosts an Active Directory integrated zone for the network. SRV1 is an application server.
answer
Enable BOOTP forwarding on the router.
question
You manage a Windows 7 computer connected business network using switches and multiple subnets. One day you find that the computer is unable to connect to the Internet,
answer
Verify that the DHCP server is up and funtional.
question
You ahve a computer that runs Windows 7 connected to a domain network. One day you find that your computer cannot connect to any network resources.
answer
Run the Ipconfig / release and Ipconfig / renew commands.
