Chapter 3 Biochemistry – Flashcards
Unlock all answers in this set
Unlock answersquestion
The chirality of an amino acid results from the fact that its alpha carbon: A) has no net charge. B) is a carboxylic acid. C) is bonded to four different chemical groups. D) is in the L absolute configuration in naturally occurring proteins. E) is symmetric.
answer
C) is bonded to four different chemical groups.
question
Of the 20 standard amino acids, only ___________ is not optically active. The reason is that its side chain ___________. A) alanine; is a simple methyl group B) glycine; is a hydrogen atom C) glycine; is unbranched D) lysine; contains only nitrogen E) proline; forms a covalent bond with the amino group
answer
B) glycine; is a hydrogen atom
question
Two amino acids of the standard 20 contain sulfur atoms. They are: A) cysteine and serine. B) cysteine and threonine. C) methionine and cysteine D) methionine and serine E) threonine and serine.
answer
C) methionine and cysteine
question
All of the amino acids that are found in proteins, except for proline, contain a(n): A) amino group. B) carbonyl group. C) carboxyl group. D) ester group. E) thiol group.
answer
A) amino group.
question
Which of the following statements about aromatic amino acids is correct? A) All are strongly hydrophilic. B) Histidine's ring structure results in its being categorized as aromatic or basic, depending on pH. C) On a molar basis, tryptophan absorbs more ultraviolet light than tyrosine. D) The major contribution to the characteristic absorption of light at 280 nm by proteins is the phenylalanine R group. E) The presence of a ring structure in its R group determines whether or not an amino acid is aromatic.
answer
C) On a molar basis, tryptophan absorbs more ultraviolet light than tyrosine.
question
Which of the following statements about cystine is correct? A) Cystine forms when the —CH2—SH R group is oxidized to form a —CH2—S—S—CH2— disulfide bridge between two cysteines. B) Cystine is an example of a nonstandard amino acid, derived by linking two standard amino acids. C) Cystine is formed by the oxidation of the carboxylic acid group on cysteine. D) Cystine is formed through a peptide linkage between two cysteines. E) Two cystines are released when a —CH2—S—S—CH2— disulfide bridge is reduced to —CH2—SH.
answer
A) Cystine forms when the —CH2—SH R group is oxidized to form a —CH2—S—S—CH2— disulfide bridge between two cysteines.
question
The uncommon amino acid selenocysteine has an R group with the structure —CH2—SeH (pKa ~ 5). In an aqueous solution, pH = 7.0, selenocysteine would: A) be a fully ionized zwitterion with no net charge. B) be found in proteins as D-selenocysteine. C) never be found in a protein. D) be nonionic. E) not be optically active.
answer
A) be a fully ionized zwitterion with no net charge.
question
Amino acids are ampholytes because they can function as either a(n): A) acid or a base. B) neutral molecule or an ion. C) polar or a nonpolar molecule. D) standard or a nonstandard monomer in proteins. E) transparent or a light-absorbing compound.
answer
A) acid or a base
question
Titration of valine by a strong base, for example NaOH, reveals two pK's. The titration reaction occurring at pK2 (pK2 = 9.62) is: A) —COOH + OH⁻ → —COO⁻ + H2O. B) —COOH + —NH2 → —COO⁻ + —NH2+. C) —COO⁻ + —NH2+ → —COOH + —NH2. D) —NH3⁺ + OH⁻ → —NH2 + H2O. E) —NH2 + OH⁻ → —NH⁻ + H2O.
answer
D) NH3⁺ + OH⁻ → NH2 + H2O
question
In a highly basic solution, pH = 13, the dominant form of glycine is: A) NH2—CH2—COOH. B) NH2—CH2—COO⁻. C) NH2—CH3⁺—COO⁻. D) NH3+—CH2—COOH. E) NH3+—CH2—COO⁻.
answer
B) NH2—CH2—COO⁻.
question
For amino acids with neutral R groups, at any pH below the pI of the amino acid, the population of amino acids in solution will have: A) a net negative charge. B) a net positive charge. C) no charged groups. D) no net charge. E) positive and negative charges in equal concentration.
answer
B) a net positive charge.
question
At pH 7.0, converting a glutamic acid to γ-carboxyglutamate, will have what effect on the overall charge of the protein containing it? A) it will become more negative B) it will become more positive. C) it will stay the same. D) there is not enough information to answer the question. E) the answer depends on the salt concentration.
answer
A) it will become more negative
question
At pH 7.0, converting a proline to hydroxyproline, will have what effect on the overall charge of the protein containing it? A) it will become more negative B) it will become more positive. C) it will stay the same. D) there is not enough information to answer the question. E) the answer depends on the salt concentration.
answer
C) it will stay the same.
question
What is the approximate charge difference between glutamic acid and α-ketoglutarate at pH 9.5? A) 0 B) ½ C) 1 D) 1½ E) 2
answer
B) ½
question
The formation of a peptide bond between two amino acids is an example of a(n) ______________ reaction. A) cleavage B) condensation C) group transfer D) isomerization E) oxidation reduction
answer
B) condensation
question
The peptide alanylglutamylglycylalanylleucine has: A) a disulfide bridge. B) five peptide bonds. C) four peptide bonds. D) no free carboxyl group. E) two free amino groups.
answer
C) four peptide bonds.
question
An octapeptide composed of four repeating glycylalanyl units has: A) one free amino group on an alanyl residue. B) one free amino group on an alanyl residue and one free carboxyl group on a glycyl residue. C) one free amino group on a glycyl residue and one free carboxyl group on an alanyl residue. D) two free amino and two free carboxyl groups. E) two free carboxyl groups, both on glycyl residues.
answer
C) one free amino group on a glycyl residue and one free carboxyl group on an alanyl residue.
question
At the isoelectric pH of a tetrapeptide: A) only the amino and carboxyl termini contribute charge. B) the amino and carboxyl termini are not charged. C) the total net charge is zero. D) there are four ionic charges. E) two internal amino acids of the tetrapeptide cannot have ionizable R groups.
answer
C) the total net charge is zero.
question
Which of the following is correct with respect to the amino acid composition of proteins? A) Larger proteins have a more uniform distribution of amino acids than smaller proteins. B) Proteins contain at least one each of the 20 different standard amino acids. C) Proteins with different functions usually differ significantly in their amino acid composition. D) Proteins with the same molecular weight have the same amino acid composition. E) The average molecular weight of an amino acid in a protein increases with the size of the protein.
answer
C) Proteins with different functions usually differ significantly in their amino acid composition.
question
The average molecular weight of the 20 standard amino acids is 138, but biochemists use 110 when estimating the number of amino acids in a protein of known molecular weight. Why? A) The number 110 is based on the fact that the average molecular weight of a protein is 110,000 with an average of 1,000 amino acids. B) The number 110 reflects the higher proportion of small amino acids in proteins, as well as the loss of water when the peptide bond forms. C) The number 110 reflects the number of amino acids found in the typical small protein, and only small proteins have their molecular weight estimated this way. D) The number 110 takes into account the relatively small size of nonstandard amino acids. E) The number 138 represents the molecular weight of conjugated amino acids.
answer
B) The number 110 reflects the higher proportion of small amino acids in proteins, as well as the loss of water when the peptide bond forms.
question
In a conjugated protein, a prosthetic group is: A) a fibrous region of a globular protein. B) a nonidentical subunit of a protein with many identical subunits. C) a part of the protein that is not composed of amino acids. D) a subunit of an oligomeric protein. E) synonymous with "protomer."
answer
C) a part of the protein that is not composed of amino acids.
question
Prosthetic groups in the class of proteins known as glycoproteins are composed of: A) carbohydrates. B) flavin nucleotides. C) lipids. D) metals . E) phosphates.
answer
A) carbohydrates.
question
For the study of a protein in detail, an effort is usually made to first: A) conjugate the protein to a known molecule. B) determine its amino acid composition. C) determine its amino acid sequence. D) determine its molecular weight. E) purify the protein.
answer
E) purify the protein.
question
In a mixture of the five proteins listed below, which should elute second in size-exclusion (gel- filtration) chromatography? A) cytochrome c Mr = 13,000 B) immunoglobulin G Mr = 145,000 C) ribonuclease A Mr = 13,700 D) RNA polymerase Mr = 450,000 E) serum albumin Mr = 68,500
answer
B) immunoglobulin G Mr = 145,000
question
By adding SDS (sodium dodecyl sulfate) during the electrophoresis of proteins, it is possible to: A) determine a protein's isoelectric point. B) determine an enzyme's specific activity. C) determine the amino acid composition of the protein. D) preserve a protein's native structure and biological activity. E) separate proteins exclusively on the basis of molecular weight.
answer
E) separate proteins exclusively on the basis of molecular weight.
question
To determine the isoelectric point of a protein, first establish that a gel: A) contains a denaturing detergent that can distribute uniform negative charges over the protein's surface. B) exhibits a stable pH gradient when ampholytes become distributed in an electric field. C) is washed with an antibody specific to the protein of interest. D) neutralizes all ionic groups on a protein by titrating them with strong bases. E) relates the unknown protein to a series of protein markers with known molecular weights, Mr.
answer
B) exhibits a stable pH gradient when ampholytes become distributed in an electric field.
question
The first step in two-dimensional gel electrophoresis generates a series of protein bands by isoelectric focusing. In a second step, a strip of this gel is turned 90 degrees, placed on another gel containing SDS, and electric current is again applied. In this second step: A) proteins with similar isoelectric points become further separated according to their molecular weights. B) the individual bands become stained so that the isoelectric focus pattern can be visualized. C) the individual bands become visualized by interacting with protein-specific antibodies in the second gel. D) the individual bands undergo a second, more intense isoelectric focusing. E) the proteins in the bands separate more completely because the second electric current is in the opposite polarity to the first current.
answer
A) proteins with similar isoelectric points become further separated according to their molecular weights.
question
The term specific activity differs from the term activity in that specific activity: A) is measured only under optimal conditions. B) is the activity (enzyme units) in a milligram of protein. C) is the activity (enzyme units) of a specific protein. D) refers only to a purified protein. E) refers to proteins other than enzymes.
answer
B) is the activity (enzyme units) in a milligram of protein.
question
Which of the following refers to particularly stable arrangements of amino acid residues in a protein that give rise to recurring patterns? A) Primary structure B) Secondary structure C) Tertiary structure D) Quaternary structure E) None of the above
answer
B) Secondary structure
question
Which of the following describes the overall three-dimensional folding of a polypeptide? A) Primary structure B) Secondary structure C) Tertiary structure D) Quaternary structure E) None of the above
answer
D) Quaternary structure
question
The functional differences, as well as differences in three-dimensional structures, between two different enzymes from E. coli result directly from their different: A) affinities for ATP. B) amino acid sequences. C) roles in DNA metabolism. D) roles in the metabolism of E. coli. E) secondary structures.
answer
B) amino acid sequences.
question
One method used to prevent disulfide bond interference with protein sequencing procedures is: A) cleaving proteins with proteases that specifically recognize disulfide bonds. B) protecting the disulfide bridge against spontaneous reduction to cysteinyl sulfhydryl groups. C) reducing disulfide bridges and preventing their re-formation by further modifying the —SH groups. D) removing cystines from protein sequences by proteolytic cleavage. E) sequencing proteins that do not contain cysteinyl residues.
answer
C) reducing disulfide bridges and preventing their re-formation by further modifying the —SH groups.
question
A nonapeptide was determined to have the following amino acid composition: (Lys)2, (Gly) 2, (Phe) 2, His, Leu, Met. The native peptide was incubated with 1-fluoro-2,4-dinitrobenzene (FDNB) and then hydrolyzed; 2,4-dinitrophenylhistidine was identified by HPLC. When the native peptide was exposed to cyanogen bromide (CNBr), an octapeptide and free glycine were recovered. Incubation of the native peptide with trypsin gave a pentapeptide, a tripeptide, and free Lys. 2,4-Dinitrophenyl-histidine was recovered from the pentapeptide, and 2,4-dinitrophenylphenylalanine was recovered from the tripeptide. Digestion with the enzyme pepsin produced a dipeptide, a tripeptide, and a tetrapeptide. The tetrapeptide was composed of (Lys) 2, Phe, and Gly. The native sequence was determined to be: A) Gly-Phe-Lys-Lys-Gly-Leu-Met-Phe-His. B) His-Leu-Gly-Lys-Lys-Phe-Phe-Gly-Met. C) His-Leu-Phe-Gly-Lys-Lys-Phe-Met-Gly. D) His-Phe-Leu-Gly-Lys-Lys-Phe-Met-Gly. E) Met-Leu-Phe-Lys-Phe-Gly-Gly-Lys-His.
answer
C) His-Leu-Phe-Gly-Lys-Lys-Phe-Met-Gly.
question
Even when a gene is available and its sequence of nucleotides is known, chemical studies of the protein are still required to determine: A) molecular weight of the protein. B) the amino-terminal amino acid. C) the location of disulfide bonds. D) the number of amino acids in the protein. E) whether the protein has the amino acid methionine in its sequence.
answer
C) the location of disulfide bonds
question
The term "proteome" has been used to describe: A) regions (domains) within proteins. B) regularities in protein structures. C) the complement of proteins encoded by an organism's DNA. D) the structure of a protein-synthesizing ribosome. E) the tertiary structure of a protein.
answer
C) the complement of proteins encoded by an organism's DNA
question
A major advance in the application of mass spectrometry to macromolecules came with the development of techniques to overcome which of the following problems? A) Macromolecules were insoluble in the solvents used in mass spectrometry. B) Mass spectrometric analyses of macromolecules were too complex to interpret. C) Mass spectrometric analysis involved molecules in the gas phase. D) Most macromolecules could not be purified to the degree required for mass spectrometric analysis. E) The specialized instruments required were prohibitively expensive.
answer
C) Mass spectrometric analysis involved molecules in the gas phase
question
Compare the following sequences taken from four different proteins, and select the answer that best characterizes their relationships. A B C 1 DVEKGKKIDIMKCS HTVEKGGKHKTGPNLH GLFGRKTGQAPGYSYT 2 DVQRALKIDNNLGQ HTVEKGAKHKTAPNVH GLADRIAYQAKATNEE 3 LVTRPLYIFPNEGQ HTLEKAAKHKTGPNLH ALKSSKDLMFTVINDD 4 FFMNEDALVARSSN HQFAASSIHKNAPQFH NLKDSKTYLKPVISET A) Based only on sequences in column B, protein 4 reveals the greatest evolutionary divergence. B) Comparing proteins 1 and 2 in column A reveals that these two proteins have diverged the most throughout evolution. C) Protein 4 is the protein that shows the greatest overall homology to protein 1. D) Proteins 2 and 3 show a greater evolutionary distance than proteins 1 and 4. E) The portions of amino acid sequence shown suggest that these proteins are completely unrelated.
answer
A) Based only on sequences in column B, protein 4 reveals the greatest evolutionary divergence.
question
What are the structural characteristics common to all amino acids found in naturally occurring proteins?
answer
All amino acids found in naturally occurring proteins have an carbon to which are attached a carboxylic acid, an amine, a hydrogen, and a variable side chain. All the amino acids are also in the L configuration.
question
Only one of the common amino acids has no free -amino group. Name this amino acid and draw its structure.
answer
The amino acid L-proline has no free -amino group, but rather has an imino group formed by cyclization of the R-group aliphatic chain with the amino group (see Fig. 3-5, p. 79).
question
Briefly describe the five major groupings of amino acids
answer
Amino acids may be categorized by the chemistry of their R groups: (1) nonpolar aliphatics; (2) polar, uncharged; (3) aromatic; (4) positively charged; (5) negatively charged. (See Fig. 3-5, p. 79.)
question
A B C D E __________________________________________________________________ Tyr-Lys-Met Gly-Pro-Arg Asp-Trp-Tyr Asp-His-Glu Leu-Val-Phe Which one of the above tripeptides: ____(a) is most negatively charged at pH 7? ____(b) will yield DNP-tyrosine when reacted with l-fluoro-2,4-dinitrobenzene and hydrolyzed in acid? ____(c) contains the largest number of nonpolar R groups? ____(d) contains sulfur? ____(e) will have the greatest light absorbance at 280 nm?
answer
: (a) D; (b) A; (c) E; (d) A; (e) C
question
Draw the structures of the amino acids phenylalanine and aspartate in the ionization state you would expect at pH 7.0. Why is aspartate very soluble in water, whereas phenylalanine is much less soluble?
answer
Aspartate has a polar (hydrophilic) side chain, which forms hydrogen bonds with water. In contrast, phenylalanine has a nonpolar (hydrophobic) side chain. (See Fig. 3-5, p. 79 for structures.)
question
Name two uncommon amino acids that occur in proteins. By what route do they get into proteins?
answer
Some examples are 4-hydroxyproline, 5-hydroxylysine, -carboxyglutamate, N-methyllysine, desmosine, and selenocysteine. Uncommon amino acids in proteins (other than selenocysteine) usually result from chemical modifications of standard amino acid R groups after a protein has been synthesized.
question
Why do amino acids, when dissolved in water, become zwitterions?
answer
Near pH = 7, the carboxylic acid group (—COOH) will dissociate to become a negatively charged —COO- group, and the —NH2 amino group will attract a proton to become a positively charged —NH3+ group.
question
As more OH- equivalents (base) are added to an amino acid solution, what titration reaction will occur around pH = 9.5?
answer
Around pH = 9.5, the —NH3+ group will be titrated according to the reaction: —NH3+ + OH- —NH2 + H2O.
question
In the amino acid glycine, what effect does the positively charged —NH3+ group have on the pKa of an amino acid's —COOH group?
answer
The positively charged amino group stabilizes the negatively charged ionized form of the carboxyl group, —COO-, and repels the departing H+ thereby promoting deprotonation. The effect is to lower the pKa of the carboxyl group (see Fig. 3-11, p. 80).
question
How does the shape of a titration curve confirm the fact that the pH region of greatest buffering power for an amino acid solution is around its pK's?
answer
In a certain range around the pKa's of an amino acid, the titration curve levels off. This indicates that for a solution with pH pK, any given addition of base or acid equivalents will result in the smallest change in pH—which is the definition of a buffer.
question
Leucine has two dissociable protons: one with a pKa of 2.3, the other with a pKa of 9.7. Sketch a properly labeled titration curve for leucine titrated with NaOH; indicate where the pH = pK and the region(s) in which buffering occurs.
answer
See the titration curve for glycine in Fig. 3-10, p. 79.
question
What is the pI, and how is it determined for amino acids that have nonionizable R groups?
answer
The pI is the isoelectric point. It occurs at a characteristic pH when a molecule has an equal number of positive and negative charges, or no net charge. For amino acids with nonionizable R groups, pI is the arithmetic mean of a molecule's two pKa values:
question
The amino acid histidine has a side chain for which the pKa is 6.0. Calculate what fraction of the histidine side chains will carry a positive charge at pH 5.4. Be sure to show your work.
answer
pH = pKa + log pKa - pH = log antilog (pKa - pH) = antilog (6.0 - 5.4) = 4 = [acid]/[conjugate base], or 4[conjugate base] = [acid] Therefore, at pH 5.4, 4/5 (80%) of the histidine will be in the protonated form.
question
The amino acid histidine has three ionizable groups, with pKa values of 1.8, 6.0, and 9.2. (a) Which pKa corresponds to the histidine side chain? (b) In a solution at pH 5.4, what percentage of the histidine side chains will carry a positive charge?
answer
(a) 6.0; (b) 80%. (See the previous problem for expanded solution to this problem.)
question
What is the uniquely important acid-base characteristic of the histidine R group?
answer
Ans: Only the imidazole ring of the histidine R group has a pKa near physiological pH (pKa = 6.0), which suggests that histidine may provide buffering power in intercellular and intracellular fluids.
question
How can a polypeptide have only one free amino group and one free carboxyl group?
answer
Ans: This is possible only if the peptide has no side chains with carboxyl or amino groups. Then, with the exception of the single amino-terminal amino acid and the single carboxyl-terminal amino acid, all the other -amino and carboxyl groups are covalently condensed into peptide bonds.
question
Hydrolysis of peptide bonds is an exergonic reaction. Why, then, are peptide bonds quite stable?
answer
Ans: Peptide bonds are stable because hydrolysis of peptide (or amide) bonds has a high activation energy and as a result occurs very slowly.
question
Draw the structure of Gly-Ala-Glu in the ionic form that predominates at pH 7.
answer
Ans: The peptide must have an amino-terminal Gly residue, a carboxyl-terminal Glu residue, and ionized amino and carboxyl groups.
question
The artificial sweetener NutraSweet®, also called aspartame, is a simple dipeptide, aspartylphenylalanine methyl ester, on which the free carboxyl of the dipeptide is esterified to methyl alcohol. Draw the structure of aspartame, showing the ionizable groups in the form they have at pH 7. (The ionizable group in the side chain of aspartate has a pKa of 3.96.)
answer
Ans: See the structure on p. 83.
question
If the average molecular weight of the 20 standard amino acids is 138, why do biochemists divide a protein's molecular weight by 110 to estimate its number of amino acid residues?
answer
Ans: For each peptide bond formed, a molecule of water is lost, bringing the average molecular weight down to 120. To reflect the preponderance of low-molecular-weight amino acids, the average molecular weight is lowered further to 110.
question
Lys residues make up 10.5% of the weight of ribonuclease. The ribonuclease molecule contains 10 Lys residues. Calculate the molecular weight of ribonuclease.
answer
Ans: From the structure of lysine, we can calculate its molecular weight (146); when it condenses (loses H2O, Mr = 18) to form a peptide bond, the resulting residue contributes 146 - 18 = 128 to the protein's molecular weight. If 10 Lys residues contribute 10.5% of the protein's molecular weight, each Lys residue is 1.05%. To calculate the total molecular weight, divide 128 by 1.05% (0.0105); the result is 12,190. (The actual value is 13,700.)
question
Why do smaller molecules elute after large molecules when a mixture of proteins is passed through a size-exclusion (gel filtration) column?
answer
Ans: The column matrix is composed of cross-linked polymers with pores of selected sizes. Smaller molecules can enter pores in the polymer beads from which larger molecules would be excluded. Smaller molecules therefore have a larger three-dimensional space in which to diffuse, making their path through the column longer. Larger molecules migrate faster because they pass directly through the column, unhindered by the bead pores.
question
For each of these methods of separating proteins, describe the principle of the method, and tell what property of proteins allows their separation by this technique. (a) ion-exchange chromatography (b) size-exclusion (gel filtration) chromatography (c) affinity chromatography
answer
Ans: (a) Ion-exchange chromatography separates proteins on the basis of their charges. (b) Size-exclusion or gel filtration chromatography separates on the basis of size (c) Affinity chromatography separates proteins with specific, high affinity for some ligand (attached to an inert support) from other proteins with no such affinity. (See Fig. 3-17, p. 87.)
question
A biochemist is attempting to separate a DNA-binding protein (protein X) from other proteins in a solution. Only three other proteins (A, B, and C) are present. The proteins have the following properties: pI (isoelectric Size Bind to point) Mr DNA? ------------------------------------------ protein A 7.4 82,000 yes protein B 3.8 21,500 yes protein C 7.9 23,000 no protein X 7.8 22,000 yes ------------------------------------------ What type of protein separation techniques might she use to separate (a) protein X from protein A? (b) protein X from protein B? (c) protein X from protein C?
answer
Ans: (a) size-exclusion (gel filtration) chromatography to separate on the basis of size; (b) ion-exchange chromatography or isoelectric focusing to separate on the basis of charge; (c) specific affinity chromatography, using immobilized DNA.
question
What factors would make it difficult to interpret the results of a gel electrophoresis of proteins in the absence of sodium dodecyl sulfate (SDS)?
answer
Ans: Without SDS, protein migration through a gel would be influenced by the protein's intrinsic net charge—which could be positive or negative—and its unique three-dimensional shape, in addition to its molecular weight. Thus, it would be difficult to ascertain the difference between proteins based upon a comparison of their mobilities in gel electrophoresis.
question
How can isoelectric focusing be used in conjunction with SDS gel electrophoresis?
answer
Ans: Isoelectric focusing can separate proteins of the same molecular weight on the basis of differing isoelectric points. SDS gel electrophoresis can then separate proteins with the same isoelectric points on the basis of differing molecular weights. When combined in two-dimensional electrophoresis, a great resolution of large numbers of proteins can be achieved.
question
You are given a solution containing an enzyme that converts B into A. Describe what you would do to determine the specific activity of this enzyme solution.
answer
Ans: First, add a known volume of the enzyme solution (say, 0.01 mL) to a solution of its substrate B and measure the initial rate at which product A is formed, expressed as mol/mL of enzyme solution/min. Then measure the total protein concentration, expressed as mg/mL. Finally, divide the enzyme activity (mol/min/mL) by the protein concentration (mg/mL); the quotient is the specific activity.
question
As a protein is purified, both the amount of total protein and the activity of the purified protein decrease. Why, then, does the specific activity of the purified protein increase?
answer
Ans: Specific activity is the units of enzyme activity (mol of product/min) divided by the amount of protein (mg). As the protein is purified, some of it is lost in each step, resulting in a drop in activity. However, other contaminating proteins are lost to a much greater extent. Therefore, with each purification step, the purified protein constitutes a greater proportion of the total, resulting in an increase in specific activity. (See also Table 3-5, p. 88.)
question
Define the primary structure of a protein.
answer
Ans: The primary structure of a protein is its unique sequence of amino acids and any disulfide bridges present in the native structure, that is, its covalent bond structure.
question
In one or two sentences, describe the usefulness of each of the following reagents or reactions in the analysis of protein structure: (a) Edman reagent (phenylisothiocyanate) (b) Sanger reagent (1-fluoro-2,4-dinitrobenzene, FDNB) (c) trypsin
answer
(a) used in determination of the amino acid sequence of a peptide, starting at its amino terminus; (b) used in determination of amino-terminal amino acid of a polypeptide; (c) used to produce specific peptide fragments from a polypeptide.
question
A polypeptide is hydrolyzed, and it is determined that there are 3 Lys residues and 2 Arg residues (as well as other residues). How many peptide fragments can be expected when the native polypeptide is incubated with the proteolytic enzyme trypsin?
answer
Ans: Six fragments would be expected, unless the carboxyl-terminal residue is Lys or Arg; in which case there would be five.
question
The following reagents are often used in protein chemistry. Match the reagent with the purpose for which it is best suited. Some answers may be used more than once or not at all; more than one reagent may be suitable for a given purpose. (a) CNBr (cyanogen bromide) (e) performic acid (b) Edman reagent (phenylisothiocyanate) (f) chymotrypsin (c) FDNB (g) trypsin (d) dithiothreitol ___ hydrolysis of peptide bonds on the carboxyl side of Lys and Arg ___ cleavage of peptide bonds on the carboxyl side of Met ___ breakage of disulfide (—S—S—) bonds ___ determination of the amino acid sequence of a peptide ___ determining the amino-terminal amino acid in a polypeptide
answer
Ans: g; a; d and e; b; c
question
A biochemist wishes to determine the sequence of a protein that contains 123 amino acid residues. After breaking all of the disulfide bonds, the protein is treated with cyanogen bromide (CNBr), and it is determined that that this treatment breaks up the protein into seven conveniently sized peptides, which are separated from each other. It is your turn to take over. Outline the steps you would take to determine, unambiguously, the sequence of amino acid residues in the original protein.
answer
Ans: (1) Use Edman degradation to determine the sequence of each peptide. (2) Create a second set of peptides by treatment of the protein with a specific protease (e.g., trypsin), and determine the sequence of each of these. (3) Place the peptides in order by their overlaps. (4) Finally, by a similar analysis of the original protein without first breaking disulfide bonds, determine the number and location of —S—S— bridges.
question
You are trying to determine the sequence of a protein that you know is pure. Give the most likely explanation for each of the following experimental observations. You may use a simple diagram for your answer. (a) The Sanger reagent (FDNB, fluorodinitrobenzene) identifies Ala and Leu as amino-terminal residues, in roughly equal amounts. (b) Your protein has an apparent Mr of 80,000, as determined by SDS-polyacrylamide gel electrophoresis. After treatment of the protein with performic acid, the same technique reveals two proteins of Mr 35,000 and 45,000. (c) Size-exclusion chromatography (gel filtration) experiments indicate the native protein has an apparent Mr of 160,000.
answer
Ans: (a) The protein has some multiple of two subunits, with Ala and Leu as the amino-terminal residues. (b) The protein has two subunits (Mr 35,000 and 45,000), joined by one or more disulfide bonds. (c) The native protein (Mr 160,000) has two Mr 35,000 subunits and two Mr 40,000 subunits.
question
Describe two major differences between chemical synthesis of polypeptides and synthesis of polypeptides in the living cell.
answer
Ans: There are many such differences; here are a few. (1) Chemical synthesis proceeds from carboxyl terminus to amino terminus; in the living cell, the process starts at the amino terminus and ends at the carboxyl terminus. In the living cell, synthesis occurs under physiological conditions; chemical synthesis does not. Chemical synthesis is only capable of synthesizing short polypeptides; cells can produce proteins of several thousand amino acids.
question
Distinguish between homologs, paralogs, and orthologs as classes of related proteins.
answer
Ans: Homologs are any members of a particular protein family, paralogs are two homologs present in the same species, and orthologs are are two homologs present in different species.
question
How are "signature sequences" useful in analyzing groups of functionally related proteins?
answer
Ans: Such sequences are often present in one taxonomic group or shared by closely related taxonomic groups, but are absent in evolutionarily more distant groups. They thus aid in constructing more elaborate evolutionary trees based on protein sequences.
