x-ray tech final exam – Flashcards

Unlock all answers in this set

Unlock answers
question
when an image demonstrates considerable differences between the densities, the image is described as:
answer
High Contrast
question
radiographic density refers to the:
answer
overall blackness of the film
question
On a basic AP exam of the knee, the central ray should be:
answer
angled 5 degrees cephalad and centered to the inferior margin of the patella
question
On a basic oblique of the foot, the______should be free of superimposition.
answer
Metatarsals
question
There are ______ tarsal bones in the foot.
answer
7
question
When an image demonstrates only a few densities but there are large differences between the adjacent densities, the image is described as having:
answer
Short scale contrast
question
What does it mean to say that radiographic film is "duplitized"?
answer
there is emulsion on both sides of the film
question
Flourescence is responsible for how much of the image on the film?
answer
99%
question
radiographic film is sensative to light, radiation, and all of the following except:
answer
odors
question
Which of the following conditions contribute to increased recorded detail?
answer
small focal spot size, long SID, and short OID
question
The cental ray on an AP lower leg is:
answer
perpendicular to the center of the film entering the midshaft of the tibia
question
In order to better visualize the joint space in the AP projection of the knee, the central ray may be angled 5 degrees:
answer
cephalic
question
This should be seen on the distal femur:
answer
knee joint and distal 3/4 of the femur
question
The standard screen against which others are measured is:
answer
100 RS
question
Which radiographic quality factor can be described as misrepresentation of the size or shape of a structure?
answer
distortion
question
The 2 projections shown below the neck of the femur is called:
answer
greater and lesser trochanter
question
Which part of an intensifying screen absorbs x-ray energy and emits this energy in the form of light?
answer
phosphor layer
question
This screen is twice as fast as a 100 RS screen:
answer
200 RS
question
Which of the following describe the characteristic curve of a film with wide latitude and longer scale contrast?
answer
a more horizontal and wide curve
question
Which of the following is/are shape distortion?
answer
elongation and foreshortening
question
If a radiographic image appears blurred, which exposure factor would be used to correct this problem?
answer
decrease in exposure time (seconds)
question
lateral to the cuneiform bone in the midfoot is the:
answer
cuboid
question
how often should screens be cleaned and inspected?
answer
every 3 months
question
the inverse square law governs the relationship between:
answer
x ray beam intensity and distance
question
the structures that should be seen in a basic toe should include:
answer
all of the above (entire digit, metatarsalphalangeal joint spaces, distal half of the metatarsals)
question
Long scale contrast is
answer
many shades of gray
question
on a lateral knee, the knee should be flexed about:
answer
20-30 degrees
question
both the camp coventry and the holmblad method are used to view what:
answer
intercondylar fossa
question
this projection provides an axial view of the patella:
answer
settegast
question
what is the relationship between film latitude and contrast:
answer
inversely proportional
question
the heel bone is also called the
answer
calcaneus
question
digits 2-5 of the foot have how many bones each?
answer
3
question
in the lower leg AP and lateral views, these structures should be seen:
answer
tibia, fibula, both joints
question
which of the following should you decrease to reduce magnification?
answer
OID
question
the SID affects the:
answer
intensity of the beam
question
this is caused by random distribution of photons and appears as grainy spots on the image:
answer
quantum mottle
question
which structures lies anterior to the distal femur?
answer
patella
question
the lateral bone of the lower leg is the:
answer
fibula
question
on the AP projection of the ankle which of these items must be visible?
answer
lateral malleolus and medial malleolus
question
this is the "ankle bone":
answer
talus
question
the SID for most projections of the lower extremity is:
answer
40 inches
question
the central ray on an AP foot is:
answer
angled 10 degrees cephalic
question
these meet to form the knee:
answer
femoral condyles and the tibial plateau
question
short scale of contrast (high contrast) is produced by:
answer
low kVp
question
the slope of the straight line portion of the sensitometric curve indicates the film's:
answer
contrast and latitude
question
this lies anterior to the distal femur:
answer
patella
question
the steeper the straight line portion of a characteristic curve for a particular film, the
answer
greater the film speed, higher the film contrast, narrower the exposure latitude
question
the patella is a ____bone.
answer
sesamoid
question
contrast is usually controlled by:
answer
kVp
question
which of the following is true regarding the correct positioning of the ankle for a lateral projection:
answer
the CR enters perpendicular to the medial malleolus
question
intensifying screens are designed to:
answer
reduce the amount of exposure
question
what are the two primary types of distortion:
answer
size and shape
question
in the lateral projection of the knee, which of these should not be seen:
answer
femoral neck
question
intercondylar eminences are also called
answer
tibial spines
question
the back of the cassettes has a layer of lead to prevent:
answer
backscatter
question
the prominence that inserts into the acetabulum is the ______of the femur.
answer
head
question
which of these is a function of the cassette:
answer
protect film from exposure to light, prevent film from bending and scratching, hold and protect the intensifying screen
question
contact test mesh is used to
answer
make sure that film/screen contact is adequate
question
what is meant by the term spectral emission?
answer
the color of light emitted by the screen phosphor
question
this is the term used to describe the "unsharp edges" of the body part on the film:
answer
penumbra
question
when comparing two intensifying screens of the same phosphor type, the screen with the smaller phosphor crystals will:
answer
produce a radiographic image with more recorded detail
question
a change from the small focal spot to the large focal spot will result in:
answer
decreased recorded detail
question
which of the following may be caused by poor film/screen contact?
answer
image blur
question
if the radiographic image is overexposed, which of the following changes in exposure factors should be used to correct the problem:
answer
decrease mAs
question
the intertarsal joints are what type of joints?
answer
gliding
question
this lies between the condyles of the femur, posteriorly:
answer
intercondylar fossa
question
the OID is the:
answer
distance from the object to the film
question
if the OID can not be minimized by positioning, magnification can be reduced by doing the following:
answer
increase SID and use small focal spot
question
density is controlled by:
answer
mAs
question
what would be the result of increasing the OID from 2 inches to 4 inches?
answer
greater magnification
question
in the holmblad method, the angle between the femur and the table should be:
answer
70 degrees
question
the central ray on a basic toe exam is
answer
perpendicular to the MP joint
question
the PA projection of the knee is usually done if this is of particular interest
answer
patella
question
on a lateral distal femur the leg should be flexed
answer
30-45 degrees
question
the cental ray using the Sunrise view of the knee is:
answer
angled so that the central ray passes between the patella and the distal femur
question
for an AP of the foot the foot should be situated so that
answer
the plantar surface of the foot is in contact with the cassette
question
on a distal femur view the bottom of the film is placed
answer
1-2 inches below the knee
question
in the holmblad method the angle between the femur and the table should be
answer
70 degrees
question
at what temperature should radiographic film be stored?
answer
50-70 degrees
question
if a films spectral sensitivity is not matched to a screen's spectral emission what is the consequences:
answer
inappropriate matching of film and screen increases the exposure required to produce an image, thus unnecessarily increasing the patients exposure
question
what is the appropriate humidity for proper film storage:
answer
30-50%
question
if an image were made using 500 mA, 0.1 seconds, and 75 kVp what would the mAs be for this exposure:
answer
50 mAs
question
the bone that is proximal to the cuneiforms is the
answer
scaphoid
question
kilovoltage controls
answer
x ray penetration
question
when using a fast screen how would you reduce quantom mottle:
answer
increase exposure time and increase mA
question
what is the knob like protuberance on the anterior surface of the tibia near the proximal end of the shaft.
answer
tibial tuberosity
question
the articular surface of each femoral condyle is cushioned by a C shaped cartilage called the
answer
meniscus
question
the distance between the tube target and the IR is termed:
answer
source image distance
question
what is the proper CR angle and direction for the axial projection of the calcaneus when the ankle is dorsiflexed so that the plantar surface of the foot is perpendicular to the IR?
answer
40 degree cephalic
question
mAs equals
answer
mA x time
question
the apex of the patella is on the proximal end of the patella.
answer
false
question
in a distal femur exam, the bucky should be used.
answer
true
question
the IR and film are the same thing.
answer
true
question
tissue density and radiographic density are essentially the same thing
answer
false
question
film should not be laid flat in storage
answer
true
question
some people have a small sesamoid bone in the back of their knee called the flabella
answer
true
question
the camp coventry method should always be done with a bucky
answer
false
question
the bucky should never be used for a knee film.
answer
false
question
the retropatellar joint space can be seen on an AP knee radiographic
answer
false
question
on the basic lower leg it is preferred to have both joints visible
answer
true
question
the femur is the longest and heaviest bone in the body
answer
true
question
a film that is too dark is said to be overexposed.
answer
true
question
the fibula is larger than the tibia
answer
false
question
the lesser trochanter is inferior to the greater trochanter.
answer
true
question
for the axial view of the calcaneus the ankle must be dorsiflexed as much as possible and held in position.
answer
true
question
what are the parts of the fixer?
answer
clearing agent, hardener, activator, preservative, solvent
question
what does the clearing agent of the fixer do:
answer
dissolves undeveloped silver halide
question
what do the reducing agents of the developer do?
answer
reduces exposed silver halide to black metallic silver
question
how should film be stored?
answer
vertically
question
how would you repair a light leak in the darkroom
answer
replace filter
question
what should the repeat ratio for an experienced operator be?
answer
4% or below
question
what does I AM EXPERT stand for
answer
identification, anatomy, markings, exposure, processing, esthetic quality, radiation safety, troubleshooting
question
what is the protocol for PA wrist
answer
PA, PA LATERAL OBLIQUE, LATERAL
question
what is the protocol for the PA hand
answer
PA, LATERAL OBLIQUE, LATERAL (FAN)
question
what is the protocol for the elbow
answer
AP, LATERAL, AP OBLIQUE MEDIAL ROTATION, AP OBLIQUE LATERAL ROTATION
question
what is the protocol for the forearm
answer
AP, LATERAL
question
the coronal plane is parallel to the IR for the lateral view of the wrist
answer
false
question
the stecher view is done to view what specific anatomy:
answer
scaphoid
question
why would an AP projection of the wrist be done in addition to the routine views
answer
to see the lunate and pisiform
question
what is another name for the tips of the fingers?
answer
ungual tufts
question
what is the protocol for a humerus
answer
AP, LATERAL
question
what is the temperature for the dryer
answer
110 degrees
question
for the lateral scapula what is the rotation of the body
answer
45-60 degrees
question
describe RAO position
answer
facing the bucky and the right side is touching
question
what is seen on the AP pelvis
answer
proximal 4th of the femur and the pelvis
question
what cause chemical fog
answer
contaminated developer, developer too high, film in developer too long (all these above)
question
developer temp in processor
answer
no more than 5 degrees
question
for involuntary motion
answer
decrease exposure time
question
structural mottle is caused by
answer
all of these: crystal thickness, crystal size, and uneven crystal distributions
question
what type of joint is the knee
answer
hinge
question
on a AP hip the feet should be rotated
answer
15-20 degrees medially
question
all of the following factors will result in high density except:
answer
large SID
question
which is not considered a rapid screen
answer
100 RS
question
using the holmblad method for tissue thickness of the distal femur
answer
increase mAs by 50%
question
this is the rounded socket of the hip joint
answer
acetabulum
question
in some states it is required to have a quality control process for the film processor
answer
true
Get an explanation on any task
Get unstuck with the help of our AI assistant in seconds
New