Flashcards and Answers - Windows 7 Configuration

question

You have a computer on your workbench without an operating system. You would like to install Windows 7 Enterprise 32-bit edition on the computer. The computer has the following hardware specifications: Hard drive with 12 GB of free space. 1 GB of RAM, one additional socket available. One Pentium 2.8 GHz processor, one additional socket available. Video card with 128 MB of memory. You need to change the hardware so that you can install Windows 7 Enterprise. What should you do?

answer

Free up some space on the hard drive.

question

You have a stand-alone computer running Windows 7 Professional. You notice that the Aero features are not displayed. The computer has a 19 inch CRT screen that supports refresh rates up to 65 Hertz and a video card with 64 MB RAM. You need to use the Aero features. What should you do?

answer

Replace the video adapter card with one that has at least 128 MB RAM.

question

You are planning to install Windows 7 Home Premium edition on a new 64-bit computer. The computer has the following hardware specifications: 500 GB hard drive. 1 GB of RAM, one additional socket available. One Pentium 2.8 GHz processor, one additional socket available. Video card with 256 MB of memory. You need to ensure that the hardware will support Windows 7 Home Premium. What should you do?

answer

Add more memory.

question

You are planning to install Windows 7 on a new 64-bit computer. The computer will be joined to a domain and you plan to configure the computer to boot from a .VHD image. Which Windows 7 editon should you use?

answer

Ultimate (64-bit)

question

You have several computers in a network. Some of the computers do not have an optical drive. Your boss has asked you to install Windows 7 on each of the computers. What should you do? (Select two. Each choice is a required part of the solution.)

answer

Use the bootsect command to make the USB flash drive bootable. Copy the product DVD to a USB flask drive and boot from the drive.

question

You have several computers in a domain network. Your company develops software that runs on bot Windows XP and Windows 7. Programmers need to have computers that will dual boot between Windows XP and Windows 7. You need to configure each system to meet the programmer's requirements. What should you do?

answer

Install Windows XP first, and then install Windows 7 on another partition.

question

You need to install Windows 7 Enterprise edition on multiple computers. Each computer has a single SATA hard drive, a PXE-compliant network card, a DVD drive, and several open USB ports. You have decided to use Windows Deployment Services (WDS) to simplify installation. You configure the WDS server with everything necessary to perform the installation. When you start each computer, you would like the computer to boot, connect to the WDS server, and start the installation process automatically without any intervention. You want to minimize the actions that you must perform on each computer. What should you do next?

answer

On each computer, edit the BIOS to boot from the network first.

question

You are installing Windows 7 on a new computer. Using the RAID controller on the motherboard, you configure three hard disks in a RAID5 array. A fourth hard disk is connected to the IDE channel. You edit the BIOS boot order to boot from the optical drive. You insert the installation DVD, boot to the disc, and start the installation. When you are prompted to select the disk where you want to install Windows, the RAID array you created does not show as a possible destination disk. Only the disk on the IDE channel is visible. Select the option you would choose to make the RAID array visible for the installation.

answer

Load Driver

question

You have a stand-alone computer running both Vista and Windows 7. The computer currently boots to Windows 7 by default. You need the computer to boot to Windows Vista as the default operating system instead. What should you do?

answer

Run bcdedit.exe.

question

You are preparing to install Windows 7 to a new computer. You copy the installation files from a DVD to a USB flash drive, then use bootsect to make the USB drive bootable. Using the RAID controller on the motherboard, you configure three hard disks in a RAID5 array. Using disk tools, you create a single partition that takes up the entire array. You insert the USB drive and boot the computer. The computer boots and shows you the following message: Error loading operating system Reboot and select proper boot device. What should you do?

answer

In the BIOS, modify the boot order to boot from the USB device first.

question

You are installing Windows 7 on a new computer. Using the RAID controller on the motherboard, you configure three hard disks in a RAID5 array. You leave the array unpartitioned and unformatted. You edit the BIOS boot order to boot from the optical drive. You insert the installation DVD, boot to the disc, and start the installation. When you are prompted to select the disk where you want to install Windows, the RAID array you created does not show as a possible destination disk. What should you do?

answer

On the screen where you select the disk to install Windows, click Load Driver.

question

You are performing a network installation of Windows 7 on a new computer. You boot the computer using Windows PE. You need to install a device driver for the network adapter. What should you do?

answer

Run drvload.exe

question

You have a computer that runs Windows Vista. You need to perform a clean installation of Windows 7 onto the computer. You would also like to retain the system and user files from the Windows Vista installation. What should you do?

answer

While running setup.exe on the Windows 7 installation media, select the Custom (advanced) option.

question

You need to install Windows 7 Enterprise edition on multiple computers. You have an ISO image of the Windows 7 Enterprise edition installation disc that you will use for the installation. You want to boot the computer to a command prompt, connect to a network share, and then run setup from the shared folder. You create a shared folder named WinInstall on a server. What should you do? (Select two. Each choice is a required part of the solution.)

answer

Extract the ISO image and copy all files in the image to the shared folder. Create a bootable disc with WinPE and the necessary network drivers. Edit the BIOS to boot from the optical drive first.

question

You have a workstation running the 32-bit version of Windows Vista Business that you would like to upgrade to the 32-bit version of Windows 7 Professional. You want to perform the upgrade with the least amount of effort and cost. What should you do first?

answer

Perform and Upgrade using the Windows 7 installation disc.

question

You have a workstation running the 32-bit version of Windows 7 Professional that you would like to upgrade to the 32-bit version of Windows 7 Ultimate. You want to perform the upgrade with the least amount of effort and cost while maintaining as much user data as possible. What should you do first?

answer

Run Anytime Upgrade

question

You have a Windows XP Professional system that you would like to upgrade to Windows 7 Ultimate. What should you do first?

answer

Run the Windows 7 Upgrade Advisor.

question

You have a computer that runs Windows XP Professional that you would like to upgrade to Windows 7 Professional. You run the setup program and install Windows 7 on the same computer and hard drive. What should you do next?

answer

Re-install all applications.

question

You have a Windows Vista system that you would like to upgrade to Windows 7. You want to make sure that everything in your current system is compatible with windows 7. What should you do?

answer

Run the Windows 7 Upgrade Advisor.

question

You have a 32-bit computer that runs Windows XP Professional. You would like to upgrade the computer to Windows 7 Ultimate. Your computer has the following specifications: Service pack 2 1 GHz processor 512 MB RAM 256 MB video card 40 GB free disk space DVD drive You would like to perform the upgrade with the least amount of effort possible. What should you do first?

answer

Add more memory

question

You have a 32-bit computer that runs Windows Vista Business RTM that you would like to upgrade to Windows 7 Ultimate. Your computer has the following specifications: 1 GHz processor 1 GB RAM 128 MB video card 16 GB free disk space DVD drive You would like to perform the upgrade with the least amount of effort possible. What should you do first?

answer

Install the latest service pack

question

You have a workstation running the 32-bit version of Windows Vista Business that you would like to upgrade to the 64-bit version

answer

Custom (advanced)

question

You have a workstation running the 64-bit version of Windows 7 Ultimate that you would like to change to the 64-bit version of Windows 7 Professional. You want to perform the upgrade with the least amount of effort and cost. What should you do first?

answer

Perform a Custom (advanced) installation using the Windows 7 installation disc.

question

You have two computers: ComputerA is running Windows Vista Business and ComputerB is running Windows 7 Professional. You are using USMT to migrate only the user profiles and user data from ComputerA to ComputerB. You need to specify the rules used for the migration to include all .jpg files. What should you do?

answer

Edit the MigUser.xml file.

question

You have two computers: ComputerA is running Windows XP Professional and ComputerB is running Windows 7 Professional. You need to transfer user profiles and data files from ComputerA to ComputerB. What should you do? (Select two. Each answer is a complete solution.)

answer

Run Windows Easy Transfer Run USMT

question

You have a single computer running Windows XP. You perform a Custom (advanced) installation of Windows 7 to the existing disk partition on the computer. You need to migrate user profiles and user data from the Windows XP installation to the Windows 7 installation. What should you do?

answer

Run scanstate with the /offlineWinOld: option

question

You have two computers: ComputerA is running Windows Vista and ComputerB is running Windows 7. You need to migrate all user profiles and data files from ComputerA to ComputerB. You need to ensure the user accounts on the destination computer are created and enabled during the migration. What should you do?

answer

On ComputerB, run loadstate with the /lae and /lac options.

question

You have a single computer running Windows Vista. You are about to complete a clean installation of Windows 7 on the computer, and you need to migrate user profiles and user data from the previous installation of Windows Vista. What should you do? (Select two. Each choice is a required part of the solution.)

answer

Use a wipe-and-load migration. Run WET and use External hard disk or USB flash drive as the transfer method.

question

You have two computers: ComputerA is running Windows Vista and ComputerB is running Windows 7. You need to migrate specific application settings from ComputerA to ComputerB by using USMT. What should you do? (Select two. Each choice is a required part of the solution.)

answer

Run scanstate with the /i option. Edit the migapp.xml file.

question

You have computer that runs Windows XP Professional. You want to upgrade your computer to Windows 7 Professional. You want to maintain as much of the application, user profile, and user data as possible. You want to perform the upgrade with the least amount of effort possible. What should you do?

answer

Run Scanstate in Windows XP. Perform a custom (advanced) installation of Windows 7 to the existing hard drive. Boot into Windows 7 and re-install all applications. Run Loadstate.

question

You have a computer that runs Windows XP Professional. You want to upgrade your computer to Windows 7 Professional. You want your user profile settings to be applied to Windows 7, with all user files available following the upgrade. You want to perform the upgrade with the least amount of effort possible. What should you do?

answer

Perform a custom (advanced) installation of Windows 7 to the existing hard drive. After the installation, boot into Windows 7 and run *Scanstate* and then *Loadstate*.

question

You have a computer running Windows 7. The computer is part of a domain. You need to transfer user profiles and data files to the computer from a network share using USMT; however, you do not have USMT. What should you do?

answer

Download the Windows Automated Installation Kit (Windows AIK) from Microsoft.

question

Command line options for the Loadstate command are listed on the left. Drag each command line option and drop it onto the correct description of the function it performs on the right.

answer

/ui > Specify user(s) to be migrated /hardlink > Restore from a linked migration store. /lae > Enable user accounts /ue > Specify user(s) to omit from migration /lac > Create user accounts

question

Command line options for the Scanstate command are listed on the left. Drag each command line option and drop it onto the correct description of the function it performs on the right.

answer

/o > Allow overwriting existing data. /ue > Specify user(s) to omit from migration /ui Specify user(s) to be migrated. /offlineWinOld > Path to the offline Windows.old folder. /p /nocompress > Generate a space estimate.

question

You have a computer that runs Windows XP Professional. You want to upgrade your computer to Windows 7 Professional. You want to customize the migration of application, user profile, and user data. What should you do? (Select two. Each choice is a required part of the solution.)

answer

Edit the MigApp.xml and MigDocs.xml files Run Scanstate.

question

You need to install Windows 7 Enterprise edition on multiple computers. Each computer has a single SATA hard drive, a PXE-compliant network card, a DVD drive, and several open USB ports. You will not be using WDS or MDT for the installation. When you start each computer, you would like the computer to boot and start the installation process automatically without any intervention. You want to minimize the actions that you must perform on each computer. What should you do next?

answer

Create an Unattended file on a USB drive. One each computer, edit the BIOS to boot from the optical drive firist. Insert the Windows installation disc into the DVD drive and the USB drive into a USB port.

question

You decide to use a system image to deploy Windows 7 to multiple computers. You have installed Windows on a reference computer. You need to restart Windows and manually install applications and make other changes prior to capturing the image. You want to prevent the Windows Welcome screen from showing when the system reboots prior to customizing the installation. You do not want any changes you make to prevent the end-user from seeing the full Out-of-Box Experience after the image is applied. What should you do?

answer

Run Sysprep with the /audit option.

question

Drag each command line for the Sysprep utility listed on the left to the correct description of its function on the right.

answer

/oobe > Starts the computer in the Windows Welcome mode. /unattend: answerfile >Applies settings in an answer file. /reboot > Restarts the computer when Sysprep completes. /generalize > Removes machine-specific information from the installation. /audit > Allows you to add additional drivers or applications and test your image.

question

You have a computer running Windows 7 Professional. You want to capture the installation as a system image. You need to remove any computer-specific information from the computer prior to capturing the image. What should you do?

answer

Run Sysprep

question

Last month you deployed Windows 7 Enterprise to all of the desktop computers in your company using a single system image. To install this image, you created a WinPE boot CD. You recently received new desktop computers, and one of your colleagues is not able to install the image using the WinPE CD. The WinPE CD cannot boot to the network drive. What should you do?

answer

Install the latest hardware drivers for these new desktop computers on the WinPE image.

question

You have a computer running Windows 7 Enterprise. You plan to capture the installation on this computer and use the image to deploy to other computers. You create an answer file named win7ent_answer.xml with Windows SIM. You want to remove computer-specific information and apply the settings in the answer file before you capture the installation. What should you do?

answer

At the command prompt, run sysprep.exe/audit/oobe/unattend:win7ent_answer.xml

question

You have a computer running Windows 7 Ultimate. Prior to capturing the system image, you need to remove machine-specific information from the installation. What should you do?

answer

At the command prompt, run sysprep.ext/generalize

question

You intend to install Windows 7 by using a Windows 7 installation DVD on several computers. To save time, you would like to automate the installation of Windows 7 for each computer. What should you do?

answer

Create an answer file named autounattend.xml. Place the file on a USB flash drive, and run setup.exe.

question

You want to deploy Windows 7 to multiple computers using a system image. You would like to use an answer file to automate the installation process on a reference computer. What should you do first?

answer

Run Windows System Image Manager (Windows SIM).

question

You want to capture a system image to deploy Windows 7 to multiple computers. You want to install Windows 7 on the reference computer using an answer file. You need to create the answer file. What should you do?

answer

1. On a technician computer, insert the Windows 7 product DVD. 2. Run Windows SIM and load a preloaded install image (install.wim) from the DVD. 3. Select and edit the responses to the questions presented during product installation. 4. Validate the file in Windows SIM. 5. Save the answer file.

question

You have a computer running Windows 7 Ultimate. You will use this computer as a reference computer to install Windows 7 from a system image. You have already used Sysprep to remove machine-specific information from the reference computer. You need to capture the image using compression, but excluding some file types from being compressed. You create a file named myCaptureSettings.ini to identify the compression settings. What should you do next?

answer

Run imagex.exe with the /capture, /compress, and /config options.

question

You decide to use a system image to deploy Windows 7 to multiple computers. You have configured a reference computer with Windows 7 and are ready to capture and deploy the image. You want to save the image file using three smaller files instead of one large file. Then you need to install the image to the new computers. You want to perform these actions with the least amount of effort possible. What should you do? (Select two. Each choice is a required part of the solution.)

answer

On the reference computer, run imagex /capture. After the image is captured, run imagex /split. On the target computer, run imagex /apply /ref.

question

You have a computer running Windows7 Ultimate. You will use this computer as a reference computer to install Windows 7 from a system image. You have already used Sysprep to remove machine-specific information from the reference computer. You need to capture the image using compression, but excluding some file types from being compressed. You create a file named myCaptureSettings.ini to identify the compression settings. You need to edit the compression settings in the file. What should you do? (Choose the best answer.)

answer

Identify files that are not compressed using the CompressionExclusionList section.

question

You have a computer running Windows 7 Ultimate. You want to capture the installation as a system image. You have already used Sysprep to remove machine-specific information from the reference computer. You need to exclude specific files from the ImageX capture operation. What should you do? (Select two. Each choice is a required part of the solution.)

answer

Run imagex.exe. Create a wimscript.ini file and include an exclusion list section.

question

Drag each command line option for the ImageX utility listed on the left to the correct description of its function on the right.

answer

/split > Splits a captured image into multiple files. /capture > Creates an image of a reference computer. /compress > Specifies compression when capturing a system image. /apply > Deploys an image. /verify > Checks for errors and file duplication. /config > Identifies an alternate configuration file name and location.

question

You have a computer without an operating system installed. You have a previously-captured image which contains a Windows 7 Enterprise installation. The image is on the following network share: imgserveimages. You need to manually deploy the image onto the computer. You boot the computer using WinPE and map a drive to the network share. What should you do next?

answer

Run Diskpart to partition and format the disk.

question

You have a single computer without an operating system installed. The computer will eventually store sensitive information and will require the encryption of the operating system partition. You have a previously-captured image which contains a Windows 7 Enterprise installation. The image is on a network share. You want to manually deploy the image to the computer. What should you do?

answer

1. Boot the new computer using WinPE. 2. Use Diskpart to create a BitLocker partition. 3. Use Diskpart to create a system partition for the Windows 7 image. 4. Use ImageX to apply the image to the local drive.

question

You have a computer without an operating system installed. You have a previously-captured image which contains a Windows 7 Enterprise installation. The image is on the following network share: imgservimages. You need to manually deploy the image onto the computer. After booting the computer into WinPE, you partitioned and formatted the local hard drive with DiskPart. What should you do next? (Select two. Each choice is a required part of the solution.)

answer

Use the net use command to connect to the network share and map the drive with a letter. Use imagex.exe with the /apply option to copy the image from the network share to the local drive.

question

You need to deploy Windows 7 Professional to multiple new computers using a previously-captured system image. You have created an answer file called Win7ProfAnswer.xml in the EImagesAnswerfiles folder. You want to apply the answer file to the image. What should you do?

answer

At the command prompt, run dism /apply-unattend:e:imagesAnswerfilesWin7ProfAnswer.xml

question

You need to deploy Windows 7 Professional to multiple new computers using a previously-captured system image on a network share. You have updated the offline image with a Windows Update Stand-alone Installer (.msu) file. You believe the new .msu file is causing a problem on the system image. What should you do?

answer

Use the dism /cleanup-image and /revertpendingactions options.

question

You need to deploy Windows 7 Professional to multiple new computers using a previously-captured system image. Before deploying the image, you need to make sure there is a specific Windows application on the image. What should you do? (Select two. Both answers are complete solutions.)

answer

At the command prompt, run dism /get-apps At the command prompt, run dism /get-appinfo

question

You need to deploy Windows 7 Enterprise to multiple new computers using a previously-captured system image. Before deploying the image, you need to see a list of all the drivers included in the image. What should you do?

answer

Run dism

question

You need to deploy Windows 7 Enterprise to multiple new computers using a previously-captured system image. Before deploying the image, you insert the third-party drivers from the C:DriversNetwork and C:Drivers|Custom directories into the system image. What should you do? (Select two. Both answers are complete solutions.)

answer

At the command prompt, run dism /add-driver /driver:c:driversnetwork /driver:c:driverscustom At the command prompt, run dism /add-driver /driver:c:drivers /recurse

question

You need to deploy Windows 7 Enterprise to multiple new computers. You have an image that you have previously captured. You have mounted and dismounted the image several times. You want to reduce the overall size of the image file by removing unnecessary resource files from the image file. What should you do?

answer

Run imagex /export.

question

You need to deploy Windows 7 Professional to multiple new computers using a previously-captured system image. You mount the image and use Dism to make several changes to the image. You decide not to keep any of the changes you have made to the image. The image is still attached. You want to undo the changes with the least amount of effort. What should you do?

answer

Run Dism with the /unmount-wim and /discard options.

question

You want to deploy Windows 7 Enterprise to multiple computers from a previously-captured system image. You have received some operating system updates and would like to add these to the existing install image without recapturing the entire image. What should you do?

answer

Run DISM

question

You need to deploy Windows 7 Enterprise to multiple new computers using a previously-captured system image. Before deploying the image, you need to append several files to the image. You want to compress the appended files to minimize disk space. What should you do?

answer

Use the same compression type as the initial capture.

question

Which script is used to create the Windows PE build?

answer

Copype.cmd

question

What do you call a template for a workstation configuration that contains all the software the workstation requires?

answer

Reference computer

question

You have a Windows image file for Windows 7. You need to add a device driver to the image file. What utility should you use?

answer

DISM.exe

question

What is the file-based disk image format used to deploy its latest Windows operating system releases, Windows 7, and Windows Server 2008?

answer

WIM

question

What is a command line program that installers can use to prepare Windows 7 computers for imaging, auditing, and deployment including preparing a reference computer?

answer

Sysprep.exe

question

Which type of image contains all of the elements of a workstation configuration, including applications drivers, updates, and all configuration settings?

answer

Thick images

question

What command is used to partition and format a disk?

answer

Diskpart.exe

question

To add drivers to an image using DISM.EXE, what file must you include?

answer

.inf file

question

You are getting ready to deploy Windows 7 to multiple enterprise workstations. What do you use to hold the information captured from the reference computer?

answer

Image file

question

You are researching the network requirements needed to support WDS on your network. One of your workstation requirements is that the network interface adapter has to support _______.

answer

Pre-boot Execution Environment

question

What is the graphical utility that installers can use to create distribution shares and answer files that automate and customize Windows 7 installations?

answer

Windows SIM

question

What is an XML script that provides the Windows 7 Setup program with the information it needs to perform an unattended installation?

answer

Answer file

question

What is a command line tool that installers can use to mount, edit, and upgrade image files in the Windows Imaging format?

answer

DISM.exe

question

What technology enables a computer to transmit the same data to multiple destinations at the same time?

answer

Multicasting

question

What can be installed on Windows Server 2008 that enables installers to deploy Windows Imaging files to workstations over the network?

answer

WDS

question

You have a Windows 7 computer that you manage at work. Because of security requirements for your company, you need to prevent all users from being able to save files to any removable storage device on the computer. Users are allowed to copy files from these devices. You want to accomplish this with the least amount of effort as possible. What should you do?

answer

In removable storage access in Group Policy, configure the policy for each device type to deny write access.

question

You have a Windows 7 computer that you manage at work. Because of the security requirements of your company, you need to prevent all users from being able to use USB flash devices on this computer. What should you do?

answer

Configure removable storage policies in the local security policy.

question

You have a Windows 7 computer that is shared by multiple users. You want to allow non-administrative users to install devices that use third-part drivers. Users should be able to install the device without prompts for administrative credentials. Users should only be able to install devices that use the drivers that you specifically identify. You copy the necessary drivers to the computer. You configure the DevicePath registry key to identify the folder where the drivers are located. A standard user logs on and tries to install the device, but gets a prompt for administrative credentials. What should you do?

answer

Obtain drivers that have a digital signature.

question

You have a Windows 7 Ultimate computer that is shared by multiple users. The default printer on your computer is a Sharp AL-2040. When you send a print job to the default printer, nothing happens. Other users who also use the same printer are not experiencing any problems. What should you do?

answer

In Devices and Printers, right-click the Sharp AL-2040 icon and select Troubleshoot.

question

You are working on a computer running Windows 7. You try to listen to Audio CDs, but no audio is coming from the speakers. After checking the speaker cables, the volume level, and the mute feature, you check Device Manager and see the dialog shown in the image. What should you do?

answer

In Device Manager, enable the Soundmax Integrated Digital HD Audio Driver device.

question

You are working on a computer running Windows 7. Your audio card is working, but you learn about an updated driver that adds some new features to the device. You download and install the new driver. After you restart and log on to Windows 7, you can no longer play audio files. Using a minimum of administrative tasks, you need to find a solution to be able to play audio. What should you do?

answer

In Device Manager, roll back the driver.

question

You have a computer running Windows 7. You need to see a list of third-party drivers on the system. What should you do?

answer

Run pnputil -e at the command prompt.

question

You are working on a computer running Windows 7. You recently installed a device that you only need temporarily. After several days of using the device, you remove it from the computer, and now you would like to remove the device driver as well. What should you do? (Select two. Both answers are complete solutions.)

answer

At the command prompt, run pnputil -d. In Device Manager, uninstall the device.

question

You have a computer running Windows 7. You need to install an updated driver for a hardware device on the computer. You need a driver file which has been tested by Microsoft and comes from a legitimate source. What should you do?

answer

Install an updated driver with a digital signature.

question

You have a computer that runs Windows 7. You create the D:drivers folder on the computer for third party drivers and copy drivers for special devices to that folder. You want non-administrative users to be able to install devices on the computer without needing administrative privileges and without being prompted for the driver, but only for those devices whose driver is located in the D:drivers folder. What should you do?

answer

In the registry, edit the DevicePath key.

question

You are working on a computer running Windows 7. You wold like to update the video driver that is used on the computer. Select the area in Device Manager where you would make this change.

answer

Display Adapters

question

You are working on a computer running Windows 7. It is part of a domain. You recently installed Windows 7 Professional edition. After installation, you are not able to connect to resources on the network. You check Device Manager and see the dialog shown in the image. What should you do?

answer

Right-click the Broadcom NetXtreme Gigabit Controller and select Update Driver.

question

You are working on a computer running Windows 7. You have several standard users needing permission to install devices on this computer because Windows 7 does not include the necessary drivers for the devices. What should you do? (Select two. Both answers are complete solutions.)

answer

Enable Allow non-administrators to install drivers for these device setup classes in Group Policy. Run pnputil -i -a to add the drivers to the driver store.

question

You have a Windows 7 computer. You install a new internal sound card in the computer. After rebooting, you install the driver, but the device doesn't appear to be working. You need to view information for the device and perform troubleshooting steps. What should you do?

answer

In Computer Management, go to Device Manager.

question

You are working on a computer running Windows 7 Enterprise. Two devices connected to the computer are not performing correctly. You suspect the devices are conflicting with each other because they may be using the same system resources. What should you do to identify the problem? (Select two. Each answer is a possible solution.)

answer

Open Device Manager and view the Resources tab. Run System Information (msinfo32).

question

You are working on a computer running Windows 7. It is a member of a domain. You need to discover if there are any drivers on the computer which do not have a digital signature. Which of the following tools should you use?

answer

Sigverif.exe

question

You have a small network with three subnets as shown in the graphic. IP addresses for each router interface are also indicated. You need to connect Wrk1_A to SubnetA and Wrk5_C to SubnetC. Which IP addresses should you use? (Select two.)

answer

Wrk1_A = 192.168.111.62 Wrk5_C = 10.155.64.97

question

You manage the small network that is connected to the Internet as shown in the graphic. You add Host A to the network. All hosts use manually-assigned TCP/IP values. The subnet where Host A resides uses a 28-bit subnet mask. Which TCP/IP configuration values should you choose for Host A? To answer, drag a value to each TCP/IP parameter shown in the diagram.

answer

IP Address 10.0.0.97 Subnet Mask 255.255.255.240 Default Gateway 10.0.0.110

question

You manage a small network with Windows 7 clients, multiple subnets, and servers.You want your computer to be able to resolve a host name for a server on your network to it's IPv4 address. What should you do? (Select two. Each choice is a possible solution.)

answer

Edit the Hosts file on the computer. Add an A record on the DNS server.

question

You manage a network with all Windows 7 clients. As part of your Ipv6 migration strategy, you have implemented Teredo on your network. You would like to test the communication of a client computer using Teredo. What should you do?

answer

Ping the address beginning with 2001:

question

Your company has started the transition to Ipv6. You need to configure records on the DNS server so that clients can submit a host name query and receive back an IPv6 address for the specified host. What should you do?

answer

Create AAAA records

question

You manage a network with all Windows 7 clients. As part of your IPv6 migration strategy, you have implemented ISATAP on your network. You would like to test the communication of a client computer using ISATAP. What should you do?

answer

Ping the address beginning with FE80:

question

You manage a small office network with a single subnet. The network is connected to the Internet. All client computers run Windows 7. A single server runs Windows Server 2008 R2. Computers are not a member of a domain. Hosts use IPv6 addresses on the private network. All hosts on the private network are assigned host names such as Computer1, Computer2, etc. All computers use a DNS server at the Internet Service Provider (ISP) to resolve hostnames for Internet hosts. You need to implement a solution so that hosts on your private network can resolve hostnames for other hosts on the private network. You want to implement the solution with the least amount of effort. What should you do?

answer

Make sure that LLMNR is enabled on all computers.

question

You manage a Windows 7 computer connected to a business network using switches and multiple subnets. One day you find that the computer is unable to connect to the Internet, although it can communicate with a few other computers on the local subnet. You type ipconfig /all on the computer and see the following output: Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : mydomain.local Description : Broadcom network adapter Physical Address : 00-AA-BB-CC-74-EF DHCP Enabled : Yes Autoconfiguration Enabled : Yes IPv4 Address : 160.254.155.1 (Preferred) Subnet Mask : 255.255.0.0 Default Gateway : DNS Servers : What should you do?

answer

Verify that the DHCP server is up and functional.

question

You have a computer that runs Windows 7. Your company has started the migration to IPv6 on your network. You need to configure your computer with a static IPv6 address. What should you do?

answer

Run netsh

question

You have installed a test network with one server and two workstations, all running IPv6. You have disabled Ipv4, and now what to test to make sure that the Ipv6 is used to communicate between hosts. Yo want to ping the link-local address for a host. What should you do?

answer

ping FE80::AB134:7845:10C:9956%12

question

You have a computer that runs Windows 7 connected to a domain network. One day you find that your computer cannot connect to any network resources. You run the Ipconfig command and find that the network connection has been assigned the address of 169.254.12.155 with a mask of 255.255.0.0. What should you do?

answer

Run the Ipconfig /release and Ipconfig /renew commands.

question

Your company has started the transition to Ipv6. You need to configure records on the DNS server so that clients can submit an IPv6 address and receive back the host name for that computer. What should you do?

answer

Create PTR records.

question

You manage a Windows 7 computer connected to a business network using switches and multiple subnets. You connect a workstation to the 192.168.1.0/24 subnet. The workstation can communicate with some hosts on the private network, but not with other hosts. You run ipconfig /all and see the following: Ethernet adapter Local Area Connection: Connection-specific DNS Suffix : mydomain.local Description : Broadcom network adapter Physical Address : 00-AA-BB-CC-74-EF DHCP Enabled : No Autoconfiguration Enabled : Yes Ipv4 Address : 192.168.1.102(Preferred) Subnet Mask : 255.255.255.0 Default Gateway : 192.168.2.1 DNS Servers 192.168.2.20 What should you do?

answer

Edit the IPv4 properties and change the default gateway.

question

You have a computer that runs Windows 7. Your network has just transitioned from using Ipv4 to Ipv6. Ipv6 configuration is performed automatically using information received by network routers. The network does not use a DHCPv6 server. Your computer is unable to communicate with a server named Srv1. A ping test to the server using its Ipv6 address works, but fails when you use its host name. What should you do?

answer

Run netsh with the add dnsserver option.

question

You have a computer that runs Windows 7. Your company has started the migration to IPv6 on your network. Your network administrator tells you that the network is using stateless autoconfiguration. You need to configure your computer for IPv6 so it is correctly configured with the Ipv6 address, default gateway, and DNS server addresses. What should you do?

answer

Edit the Internet Protocol Version 6 (TCP/IPV6) properties for the network adapter. Select Obtain an IPv6 address automatically and Use the following DNS server addresses.

question

You have a computer that runs Windows 7. Your company has started the migration to IPv6 on your network. Your network administrator tells you that the network is using stateless autoconfiguration. You need to configure your computer for IPv6 so it is correctly configured with the IPv6 address, default gateway, and DNS server addresses. The computer is currently configured to get all IPv6 information automatically. What should you do?

answer

Run netsh interface ipv6 add dnsserver

question

You have a computer that runs Windows 7. Your network has just transitioned from using IPv4 to IPv6. IPv6 configuration is performed automatically using stateful DHCPv6. A DNS server on your network provides name resolution for IPv6. Your computer is having problems communicating on the network. You would like to receive new configuration information from the DHCP server as well as remove all old DNS entries in your local DNS cache. What should you do? (Select two. Each choice is a required part of the solution.)

answer

Run ipconfig /release6 and ipconfig /renew6 Run ipconfig /flushdns

question

You have just received a new laptop at work that you will use on your company network and at home. The company network uses dynamic addressing, while your home network uses static addressing. You connect the laptop to the company network and everything works fine. When you take your laptop home, you cannot connect to devices on your home network or the Internet. You run ipconfig on the laptop and receive the following output: Connection-specific DNS Suffix : IP Address : 169.254.22.74 Subnet Mask : 255.255.0.0 Default Gateway : You need to be able to connect to both the company network and your home network with the least amount of configuration and cost. What should you do?

answer

Configure an alternate TCP/IP configuration.

question

You have a computer that runs Windows 7 connected to a domain network. After reconfiguring the static address of an internal Web server named WEB3, your computer can no longer connect to WEB3. However, other users are still able to connect to the same Web server. You need to be able to connect to the website on the WEB3 server. What should you do?

answer

Run ipconfig /flushdns

question

You have a laptop that runs Windows 7. The laptop uses DHCP for IPv4 addressing information. You need to see the IPv4 address, subnet mask, and DNS server addresses that the network connection is currently using. What should you do? (Select two. Each choice is a possible solution.)

answer

Run the netsh command. View the status for the network connection. Click the Details button.

question

You have a laptop that runs Windows 7. The laptop uses IPv6. The network connection is configured to obtain an IPv6 address automatically. You need to see the IPv6 address that the network connection is currently using. What should you do? (Select two. Each choice is a possible solution.)

answer

View the status for the network connection. Click the Details button. Run the netsh command.

question

You have two computers running Windows 7 named Comp1 and Comp2. Both Comp1 and Comp2 received their IP addresses from a DHCP server in the network, and accessed the Internet through a common default gateway. After several changes in the network infrastructure, Comp1 is the only computer with a connection to the Internet. In addition, Comp1 is now acting as the default gateway and is sharing its Internet connection with Comp2. On Comp2, you are unable to access the Internet. You use the ipconfig /all command and discover the IP address for the Local Area Connection is 192.168.0.25. What should you do?

answer

On Comp2, run ipconfig /renew

question

You have two computers running Windows 7 named Comp1 and Comp2. Both Comp1 and Comp2 received their IP addresses from a DHCP server in the network, and accessed the Internet through a common default gateway. After several changes in the network infrastructure, Comp1 is the only computer with a connection to the Internet. In addition, Cmop1 is now acting as the default gateway and is sharing its Internet connection with Comp2. On Comp2, you are unable to access the Internet. You use the ipconfig /all command and discover the IP address for the Local Area Connection is 192.168.0.25 with a subnet mask of 255.255.255.0. What should you do?

answer

On Comp2, run ipconfig /renew

question

You have a Windows 7 Ultimate laptop computer that you use both at home and in the office. The laptop has both an Ethernet and a wireless network connection. At home you have created a simple Ethernet network that connects your home computers to the Internet through a cable modem. A friend comes over to your house for some help configuring his new laptop computer. His computer has a wireless network adapter but not an Ethernet network adapter. He wants to connect his laptop through your network to the Internet to download some drivers. What should you do? (Select two. Each choice is a required part of the solution.)

answer

On your laptop, configure a network bridge. Set up an ad hoc wireless connection between his computer and yours. Configure the wireless connection to use WPA-Personal

question

You have a small wireless network with 10 client computers configured in a workgroup. You upgraded the firmware on two wireless devices so you can use a better security standard than WEP. Now you need to implement the new security standard. You need the greatest amount of security with the least amount of effort, and without replacing any of the wireless infrastructure. What should you do? (Select two.)

answer

Configure each client with the same key. Implement WPA-PSK.

question

You have received a new Windows 7 Business edition laptop for use at work. You configure the wireless adapter to connect to the network. You also have a wireless network at home. You configure a second profile for your home network. For several weeks, the wireless connection works fine. Whether you are at home or at work, you can start your computer and make a connection without browsing for the list of available networks. One day you come in to work to find that you can't connect. You check with the network administrator, and he states that they have prevented the SSID of the company network from being visible. You need to make it as easy as you can to connect to the company wireless network now and in the future. What should you do?

answer

In the wireless network profile, select Connect even if the network is not broadcasting.

question

You have a laptop computer that runs Windows 7. Your computer is configured to connect to the wireless network at work using a wireless profile named Company1. The profile is configured to connect using 802.11b. During a recent upgrade, your company has added an 802.11n wireless router. The router is configured to support 802.11n using one radio, and 802.11b/g with the other radio. You create a second profile on your computer for the 802.11n network. You notice that your computer is connecting automatically using 802.11b. You want the computer to connect first using 802.11n, and only use 802.11b if 802.11n is unavailable. What should you do?

answer

Move the 802.11n profile up in the list of the preferred networks.

question

You are configuring a small wireless network with 10 client laptops that require network access. You have configured a new wireless access point with an SSID that is not broadcasting. You have manually created a network profile on one computer, which successfully connects to the network. You would like to configure the network profile on the remaining clients with the least amount of effort. What should you do?

answer

Use the Copy this network profile to a USB flash drive option to save the wireless network settings to a USB flash drive. On each additional client, insert the USB drive and run the utility to copy the profile settings to the client.

question

You want to connect a laptop computer running Windows 7 to a wireless network. The wireless network uses multiple access points and WPA2-Personal. You want to use the strongest authentication and encryption possible. SSID broadcast has been disabled. What should you do?

answer

Configure the connection with a preshared key and AES encryption.

question

You have a computer running Windows 7 Professional. The computer is a member of a domain. You need to configure the wireless network card to connect to your network at work. The connection should use a user name and password for authentication with AES encryption. What should you do?

answer

Configure the connection to use WPA2-Enterprise.

question

You have a laptop that runs Windows 7. The laptop has a built-in Ethernet and wireless network card. The wireless card stops working. You use the PCMCIA slot to add a wireless card to your laptop. After installing the wireless card, the adapter does not show in the list of available network adapters in the Network and Sharing Center. What should you do to troubleshoot the problem?

answer

In Device Manager, right-click the wireless device and choose Properties. Examine the device configuration.

question

You have a new Windows 7 Ultimate computer with both a wired and a wireless connection. You want to configure a small wireless network at home. You install a router that connects your network to the Internet and which is the wireless access point. You have turned off SSID broadcast on the Internet router. You will connect devices using a preshared key. You need to configure your laptop to connect to the wireless network, and would like to use the most secure method available to you. What should you do? (Select two. Each choice is a required part of the solution.)

answer

Use WPA2-Personal security. Manually create a network profile.

question

You have a computer that runs Windows 7. You need to free up disk space and would like to delete all but the most recent restore point. What should you do? (Select two. Each selection is a complete answer.)

answer

Run Cleanmgr as an administrator, then use the More Options tab to clean up the restore points. In Disk Cleanup, select Clean up system files, then use the More Options tab to clean up the restore points.

question

You have a computer that runs Windows 7. You want to modify the disk defragmentation schedule to run twice a week on Wednesdays and Saturdays at 11pm. What should you do?

answer

In Scheduled Tasks, modify the default task to run on Wednesdays and Saturdays.

question

You have a Windows 7 computer with a single hard disk. You notice that the disk defragmentation schedule has been turned off on your computer. The disk is badly fragmented. You want to run disk defragmentation manually. What should you do?

answer

Run Defrag.

question

You have a Windows 7 computer shared by multiple users. The computer has a single hard disk with a single partition. You want to make sure that each user can only save up to 4 GB of files on the existing hard disk. Files stored to USB devices should not count towards the limit. What should you do?

answer

Configure disk quotas.

question

You have a Windows 7 Professional computer that is used by three users. Each user has a folder for storing personal data. Chat copies a file from a CD-RW to his folder and receives the message Insufficient disk space. He finds that he cannot even add data to an existing file and save it. Other users of the computer do not have the same problems. You see that the volume has over 20 GB of free disk space. You need to let Chad create and edit files. What should you do?

answer

Increase the quota limit.

question

What is used to specify which bits of an IPv4 address are used for the network identifier and which bits are used for the host identifier?

answer

Subnet mask

question

What would a corporation use to allow private IPv4 addresses to communicate with the Internet?

answer

NAT

question

Which type of IPv6 address is unique throughout the IPv6 universe?

answer

Global

question

You are troubleshooting your network and want to determine the path that your communications is taking to get to its destination. What command line utility can you use to determine the path that the packets have taken?

answer

tracert

question

__________ are the rules or languages in which networking is possible.

answer

Protocols

question

What address is assigned to a computer that fails to locate a DHCP server?

answer

APIPA

question

What is the default subnet mask for 198.54.65.3?

answer

255.255.255.0

question

If you have an IPv4 address of 123.54.34.77 with a subnet mask of 255.255.240.0, what is the CIDR notation?

answer

/20

question

Your supervisor has asked you to compile a graphical representation of the network. What is the best method to accomplish this task for your supervisor?

answer

netsh

question

What layer of the OSI model are the Media Access Control addresses part of?

answer

Data-link

question

In what class is the address of 156.43.75.212?

answer

Class A

question

On which layer of the OSI model is IPv4 Addressing included?

answer

Network

question

What command is used to test network connectivity between two hosts?

answer

Ping

question

What type of connector does an unshielded twisted pair (UTP. cable use?

answer

RJ45

question

Which of the following is NOT an IPv4 private address range?

answer

224.0.0.0 through 224.255.255.255

question

Your Windows 7 computer has two hard drives as shown in the image. The C: drive is running out of space. You would like to move the C:Finances folder to the D: drive. Existing NTFS permissions should be kept on the folder following the move. You want to accomplish this with the least amount of effort possible. What should you do?

answer

Run the convert command, followed by the xcopy command.

question

You manage a Windows 7 computer. You need to control access to the D:Reports folder as follows: Members of the Accounting group should be able to open and view all files, edit them, and add new files. They should not be able to delete or rename files. Mary needs to be able to open and view files, but should not be able to modify the files. Mary is a member of the Accounting group. You want to assign NTFS permissions taking the least amount of actions possible and affecting existing permissions as little as possible. What should you do?

answer

Assign Allow Read & execute, List folder contents, Read, and Write to the Accounting group. For the Mary user account, Deny the Write permissions.

question

An employee has a Windows 7 laptop. The employee has just been fired, but not before he assigned Deny Full Control permission to Everyone to all the files and folders on the laptop. All users, including you, are now blocked from accessing these important files. You are the administrator and you need to make these files available as quickly as possible. What should you do?

answer

Take ownership of the files, and change the permissions.

question

You manage a Windows 7 computer. For the D:ReportsFinances.xls file, you explicitly grant the Mary user account the Allow Modify NTFS permissions. You need to move the file from the existing folder to the DConfidential folder. You want to keep the existing NTFS permissions on the fold. You want to accomplish this with the least amount of effort possible. What should you do?

answer

Move the file to the new folder.

question

You have a Windows 7 computer that is shared by multiple users. Sally wants to access a file in the Reports folder. A group named Sales has been granted the Full Control permission to the Reports folder and all subfolders and files. You add Sally as a member of the Sales group, but she still cannot access the file that she needs. You want to let Sally access the Reports folder. What should you do?

answer

Remove Sally from any other groups that have been explicitly denied access to the Reports folder.

question

You manage a Windows 7 computer. You need to control access to the D:Reports folder as follows: Members of the Accounting group should be able to open and view all files but not modify them. Mary needs to be able to modify existing files in the folder, add new files to the folder, but should not be able to delete or rename files. Mary is a member of the Accounting group. You want to assign NTFS permissions taking the least amount of actions possible. What should you do?

answer

Assign Allow Read & execute, List foldler contents, and Read to the Accounting group. Assign Allow Write to Mary.

question

You have a small home network with the following computers: Comp1 runs Windows 7 Home Comp2 runs Windows 7 Home Premium Comp3 runs Windows 7 Professional You want to create a HomeGroup for your network. Which of the following should be part of your configuration? (Select the two most correct answers. Each choice is a required configuration step.)

answer

Create the HomeGroup on Comp2 or Comp3. Set the network location to Home.

question

On your Windows 7 computer, you share the D:Apps folder using a sharename of Apps. You need to configure permissions to the share as follows: Members of the Appusers group should be able to open and view files in the shared folder. User JohnS should not have any access to files in the shared folder. JohnS is a member of the Appusers group. You need to assign the necessary permissions without assigning extra permissions beyond what is required and without affecting other access that might already be configured on the computer. You need to complete the task using the least amount of effort possible. What should you do?

answer

Assign Allow Read permission to Appusers, and assign Deny Read permission to JohnS.

question

You have a Windows 7 computer that you use at home. You have a small network set up, with each member of the family having their own computer. You would like to share files such as pictures, videos, and music on your computer with other members of your family. Your mother should be able to modify any of these files, while everyone else should only have read-only access. You want to use the simplest method to make these files available while providing the level of access specified. What should you do?

answer

Enable file and printer sharing in the Network and Sharing Center. Share specific folders and configure the necessary permissions.

question

You have a Windows 7 computer. You use the computer at home with a small network used by members of your family. You want to share the contents of a folder with other users over your network. Most users should have read-only access, but you want to explicitly deny access to other users. You want to configure the permissions using the least amount of effort possible. What should you do?

answer

Right-click the folder and select Properties. Configure Advanced Sharing on the Sharing tab.

question

You manage a Windows 7 computer on a small home network. You want to share the following folders on your computer with users on the network: D:Clipart D:Fonts D:VacationPictures You want to allow access meeting the following requirements: Users will access all folders through a simple share. The share should include only these folders and no others. The folders should remain in their current locations in the file system structure. What should you do?

answer

Create a library. Add all folders to the library. Share the library with the HomeGroup.

question

You have a laptop running Windows 7 Professional. The computer is a member of the mydomain.local Active Directory domain. You take your laptop home and connect it on your home network using a wireless connection. You would like to join the HomeGroup from your laptop that has already been created on your home network. What should you do?

answer

Turn on Network Discovery.

question

Your Windows 7 computer has a shared folder named Reorg. The folder contains sensitive information about planned changes in the personnel structure. You configure permissions on the folder to deny access to unauthorized users. You want to prevent users from seeing this share when they browse the computers on the network. You still need to allow access to users who are authorized to use the share. What should you do?

answer

Stop sharing the folder. Share the folder again as Reorg$ with the same permissions as before.

question

Your Windows 7 computer has a folder named D:SalesDocs. The folder has been shared with the sharename of SalesDocs. The D: drive is formatted with NTFS. The following permissions have been configured for the folder: NTFS permissions Users group = Allow-Read Sales group = Allow-Modify Share permissions Users group = Allow-Read Sales group = Allow-Change Sally is a member of the the Users and Sales groups. She needs to be able to red and modify all files in the SalesDocs shared folder except for the StyleGuide.doc file. Sally should be able to read StyleGuilde.doc but not modify it. What should you do?

answer

Set Sally's NTFS permission for SytleGuide.doc to Deny Write.

question

You have a folder on your Windows 7 computer that you would like members of your development team to access. You want to restrict network and local access to only specific users. All other users must not be able to view or modify the files in the folder. What should you do? (Select two.)

answer

Place the files on an NTFS partition. Configure both share and NTFS permissions.

question

On your Windows 7 computer, you share the D:Reports folder using a sharename of Reports. You need to configure permissions on the shared folder as follows: ? Members of the Accounting group should be able to view files, but not modify them. ? Phil, a member of the Accounting group, needs to be able to open and edit files in the shared folder. ? No one else should be allowed access. You need to assign the necessary permissions without assigning extra permissions beyond what is required and without affecting other access that might already be configured on the computer. You need to complete the task using the least amount of effort possible. What should you do?

answer

Add the Accounting group and assign the Read permission. Add the Phil user account and assign Read/Write permission.

question

On your Windows 7 computer, you share the D:Promo folder using a sharename of Promo. The share has been assigned the following permissions: User/Group Permission Telesales group Allow Read Training group Deny Full Control Managers group Allow Change Mary user Allow Change The Mary user account is a member of the Training group. NTFS permissions allow all access. Mary needs to be able to edit documents in the shared folder but cannot. You need to modify the share permissions to allow her the necessary access. What should you do? (Choose two. Each choice is a possible solution.)

answer

Change the Training group permission to allow Read. Remove the Mary user account from the Training group.

question

You manage a Windows 7 computer. One day you are downloading some new mp3 files to your computer. You save the files directly to the music library on your computer. You want to copy the new files to a different folder on your computer. You view the properties of the Music library and see the dialog shown in the image. What should you do?

answer

Copy the new files from the C:UsersPublicPublic Music folder.

question

You have a laptop running Windows 7 Professional. The computer is a member of the mydomain.local Active Directory domain. You take your laptop home and use it on your home network. You would like to create a HomeGroup from your laptop that can be used on your home network. What should you do?

answer

Disjoin your computer from the domain.

question

You have a folder on your Windows 7 Professional computer that you would like to share with members of your development team. Users should be able to view and edit any file in the shared folder. You share the folder and give Everyone Full Control permission to the shared folder. Users connect to the shared folder and report that they cannot modify any of the files. What should you do?

answer

Modify the NTFS permissions on the folder.

question

You have a laptop that runs Windows 7. You connect your laptop on the network at work to allow an associate to copy files from your computer. Other computers on the network are not able to discover your computer, and your computer is not able to build an accurate network map in the Network and Sharing Center. You open the Network and Sharing Center and see the information shown in the image. What should you do?

answer

Change the network type to Home.

question

Your Windows 7 computer has a folder named D:SalesDept. The D: drive is formatted with FAT32. You need to allow network access to the folder as follows: ? Members of the Sales group should have read-only access to the content in the folder. ? Members of the SalesAdmin group should be able to open, edit, and add new files to the folder. ? No other users should have access. Members of the SalesAdmin group are also members of the Sales group. You want to assign as few permissions as possible. What should you do?

answer

Share the SalesDept folder. Grant Read permission to the Sales group and Change permission to the SalesAdmin group. Remove Everyone from the access control list.

question

You have a laptop running Windows 7 Professional. The computer is a member of the mydomain.local Active Directory domain. You travel to a branch office in your company. The branch office has 5 computers running Windows 7 Ultimate edition. Computers in the branch office are not domain members. All computers use a HomeGroup for file sharing. You want to join the HomeGroup in the branch office. What should you do?

answer

Set the network location for the connection to Home.

question

You manage a Windows 7 computer. The computer has a printer shared with the name of Printer1. You need to modify the permissions that apply to the shared printer for network users. What should you do?

answer

In Devices and Printers, right-click the printer and select Printer properties. Edit the Security settings.

question

You manage a Windows 7 computer with an attached printer. You share the printer using a share name of Printer1. You assign the Allow Print permission for the printer to the Sales group. However, you discover that users who are not members of this group can print to the printer. You want only members of the Sales group print to Printer1. What should you do?

answer

Remove Everyone from the printer's access control list.

question

You have a new laptop computer running Windows 7 Professional. You need to connect your computer to a wired network at work and a wireless network at home. While connected to your work network, you set the default printer. You want to configure a different default printer to use when connected to your home network. What should you do?

answer

In Devices and Printers, click Manage default printers.

question

You manage a computer that runs Windows 7. The computer has a shared printer named Printer1. You want to let Chat pause, restart, and delete print jobs on the printer. Chad should not be allowed to delete the printer or change its properties. Chad is a member of the Sales group. Currently, the Everyone group has the Allow Print permission to the printer. What should you do?

answer

Assign Chad the Allow Manage Documents permission to the printer.

question

You have a laptop computer running Windows 7 Home Premium. You connect your computer to a wired network at work and a wireless network at home. You want to configure your computer to use a different default printer for each network. What should you do?

answer

Upgrade your computer to Windows 7 Professional.

question

You manage a Windows 7 computer with a printer that is used by the Sales department. The sales manager has asked you to restrict access to the printer as follows: ? Sally needs to connect to a printer, print documents, and pause and resume her own print jobs. ? Damien needs to pause and resume documents for all users, but does not need to change printer properties. You want to assign the most restrictive permissions that meet the sales manager's requirements. What should you do? (Choose two. Each choice is a required part of the correct solution.)

answer

Assign Sally the Print permission. Assign Damien the Manage Documents permission.

question

You have a new laptop computer running Windows 7 Professional. You need to connect your computer to a wired network at work and a wireless network at home. While connected to your work network, you set the default printer. You want to configure a different default printer to use when connected to your home network. In Devices and Printers, you click Manage default printers. Your home wireless network does not appear in the list of available networks. What should you do?

answer

Connect to the wireless network.

question

You have set up the AccountWizard.exe program to run in Compatibility mode on a Windows 7 computer. After running the program, you find that the large-scale fonts do not appear correctly and the movement of the window appears erratic. Select the settings you would enable to correct these issues. (Select two.)

answer

Disable desktop composition Disable display scaling on high DPI settings.

question

You have a computer running Windows 7 Ultimate. For several years, the developers in your company have used a specific application. After installing the application on your computer, it no longer executes correctly. The application worked best on Windows XP machines with Service Pack 3. You need to have the application work correctly on this computer with the least amount of administrative effort. What should you do?

answer

Run the application in compatibility mode.

question

You manage a network with 30 computers. Each computer is currently running Windows XP. All computers are members of a domain. You need to upgrade the computers to Windows 7 Professional. You will use a system image to deploy a clean installation of Windows 7 to each computer. Before you begin the upgrading process, you need to identify which applications installed on computers can run on Windows 7. What should you do?

answer

Use the Microsoft Application Compatibility Toolkit (ACT).

question

Drag each application compatibility setting on the left and drop it on the corresponding function that the setting performs.

answer

Turns off automatic resizing of applications when using large-scale fonts > Disable display scaling on high DPI settings. Disables Aero features > Disable desktop composition. Allows applications with limited color palette to display properly > Run in 256 colors. Resolves display problems with menus and buttons > Disable visual themes. Allows low resolution applications to display properly > Run in 640 x 480 screen resolution.

question

You have a computer running Windows 7 Enterprise. A custom application works great on previous versions of Windows; however, it does not execute correctly on the Windows 7 computer. In an attempt to fix the problem, you tried to run the application in compatibility mode. When this didn't work, you temporarily disabled UAC, but this didn't fix the problem. You must get the application to work correctly on this computer. What should you do next?

answer

Implement a shim from the Compatibility Administrator.

question

You have a computer running Windows 7 Professional. You have a custom application that will not run on the computer. The application works well on computers running in 32-bit installation of Windows XP Professional. You decide to use Windows XP mode to run the application. Your computer has the following hardware specifications: C: drive with 62 GB of free space. 1 GB of RAM, one additional socket available. One Core 2 duo processor with Intel VT support. Video card with 128 MB of memory with WDDM support. You need the computer to run Windows XP mode. What should you do?

answer

Add more memory

question

You just purchased a new Windows 7 system for an artist in your company. After installing an art application to the computer, the artist states that the application does not work correctly. The application worked fin on a Windows XP machine. In an attempt to fix the problem, you tried to run the application in compatibility mode. When this didn't work, you temporarily disabled UAC, but this still didn't fix the problem. You decide to create a shim for the application. You download the Application Compatibility Toolkit (ACT). What should you do next?

answer

Run the Compatibility Administrator.

question

You have a Windows 7 computer that is shared by multiple users at work. You want to allow only members of the Sales team to run the sales lead application. The rule should use the digital signature of the software and apply to all current and future versions of the application, regardless of the filename or its location. You decide to create an executable rule with a publisher condition using application control policies. What should you do?

answer

Browse and select the executable file for the application. Modify the rule to include the product name information.

question

You manage a Windows 7 computer that is shared by multiple users. You want to prevent users from running a common game on the computer. You want to prevent the game from running even if the executable file is moved or renamed. You decide to create a Software Restriction policy rule to protect your computer. What should you do?

answer

Create a hash rule.

question

You have a Windows 7 computer that is shared by multiple users at work. You want to allow only members of the Sales team to run the sales lead application. If possible, the rule should apply to all current and future versions of the application, regardless of the filename or its location. The application is not digitally signed. What should you do?

answer

Create an executable rule with a file hash condition in application control policies.

question

You manage a computer that runs Windows 7. You want to find out who has been running a specific game on your computer. You do not want to prevent users from running the program, but instead want to log information when the file runs. The application is not digitally signed. What should you do?

answer

In application control policies, create an executable rule with a path condition that identifies the file. For executable rules, configure "Audit only".

question

You manage a computer that runs Windows 7. You want to prevent users from running any file with a .bat or .vbs extension unless the file is digitally signed by your organization. What should you do?

answer

In application control policies, create a script rule with a publisher condition.

question

You manage several computers that run Windows 7. You would like to have better control over the applications that run on these computers, so you have decided to implement AppLocker. You have created default rules and an executable rule that allows the company's accounting application to run. You notice that you can still run any program on your test client. What should you do? (Select two. Each choice is a possible solution.)

answer

Set the enforcement mode for executable rules to Enforce rules. Start the Application Identity service on the client.

question

You manage a computer running Windows 7 and shared by multiple users. Recently, users have downloaded and installed two malware programs onto the computer. After download, the applications are installed by running programs with a .msi extension. The files are not digitally signed. You want to prevent all users from installing these applications, regardless of how they have obtained the files. What should you do?

answer

In application control policies, create a Windows Installer rule with a file hash condition.

question

You manage a computer that runs Windows 7. You would like to prevent users from running all software on the computer except for software that has been digitally signed. The rule should apply to all known and unknown software. What should you do?

answer

Configure an executable rule in application control policies with a publisher condition.

question

You have a Windows 7 computer that is shared by multiple users at work. You want to allow only members of the Sales team to run the sales lead application. The rule should apply to all current and future versions of the application, regardless of the filename or its location. What should you do?

answer

Create an executable rule with a publisher condition in application control policies.

question

What of the following is based on a push technology used with Internet Explorer that notifies you when a Web site is changed?

answer

RSS

question

Which of the following is used to help prevent attackers that penetrate the computer?s defense from accessing vital system components?

answer

Protected mode

question

Which of the following is NOT an available security zone found in Internet Explorer?

answer

Custom Sites

question

Which of the following configures Internet Explorer to only low-integrity disk locations, such as the Temporary Internet Files and the standard IE storage areas, including the History, Cookies, and Favorites folders?

answer

Protected mode

question

Which add-on enables users to send text or other media that you select in an IE browser window to another application, such as an email client, or an Internet resource, such as a blog?

answer

Accelerators

question

You are visiting a Web site that worked fine when you were using Internet Explorer 6 on a Windows XP machine. However, you suspect that this Web site is not compatible with Internet Explorer 8?s protected mode. Which of the following should you NOT do when troubleshooting this problem?

answer

Run Internet Explorer as a domain administrator.

question

What technology is used with IE 8 to help defend against phishing?

answer

SmartScreen Filtering

question

What feature found in Internet Explorer 8 enables you to surf the Internet without leaving any record of your activities?

answer

InPrivate Filtering

question

What program that comes with Windows 7 is a wizard-based solution that users or administrators can use to automatically configure an executable file to use an appropriate Windows 7 compatibility mechanism?

answer

Program Compatibility Troubleshooter

question

You have just installed a new Windows 7 computer for a client. The client asks you to install a software program that has the following minimum software requirements. 256 Memory 1 Gigabyte Hard Drive Windows XP Operating system You install the software on the Windows 7 computer and when you select the shortcut to launch the executable the program will not launch. What step would be most appropriate to take next?

answer

Run the program using one of the Windows XP compatibility modes

question

What specialized program collects compatibility information for web pages and web-based applications?

answer

Internet Explorer Compatibility Test Tool

question

Software Restriction policies and AppLocker are configured through __________.

answer

Group policies

question

If you have a program that ran in Windows XP but does not run in Windows 7, what should you load to run the program?

answer

Windows XP Mode

question

Your organization must upgrade to Windows 7. During the upgrade planning process you discover an application that will not run and is not supported on the Windows 7 platform. The organization must have the application and must upgrade to Windows 7. What solution would you recommend?

answer

Install the program on the Windows 7 computer using Windows XP Mode

question

You have a program that ran on your Windows XP machine that was running SP2. You try to install the program on Windows 7, but it does not run. What should you try first to overcome this problem?

answer

Configure a Windows emulation mode.

question

You have a computer that runs Windows 7. You have just read about a new security patch for Windows 7. You install the patch as a Windows Update, but after you reboot and log back on your computer is unstable. What action should you take?

answer

Use Windows Update in the Control Panel to uninstall the update.

question

You have a computer that runs Windows 7. You need to manually check for updates from Windows Update. What should you do? (Select two. Both answers are complete solutions.)

answer

Run *wuauclt.exe /detectnow*. Click the *Check for updates* button in Windows Update.

question

You have a computer that runs Windows 7. Your computer is configured to download and automatically install important (critical) patches using Windows Update. You notice that updates that Microsoft suggests, but does not mark as important, are not being downloaded. You would like these other updates to download and install automatically with the least amount of effort. What should you do?

answer

Configure Windows Update to include recommended updates.

question

You have a computer that runs Windows 7. Windows Update is continually notifying you to install an update that you have determined that you should not install on your machine due to incompatibility reasons. You want Windows Update to stop notifying you of this update. What should you do?

answer

Hide the update.

question

You have a computer that runs Windows 7. The computer is a member of a domain. Windows Update settings are controlled through Group Policy. You find that your computer has not been installing recent updates. You want to see information about how the computer is configured to get updates including the name of the server it tries to contact when checking for and downloading updates. What should you do?

answer

Look through the WindowsUpdate.log file.

question

You have a stand-alone computer running Windows 7 Professional. You need to determine if the computer has any administrative vulnerabilities. What should you do?

answer

Use Microsoft Baseline Security Analyzer (MBSA)

question

You have a computer that runs Windows 7. While manually configuring Windows Update, you notice that several settings are grayed out and unchangeable as shown in the image. You want to enable the settings so you can manually configure them. What should you do?

answer

Use Group Policy to modify the Windows Update settings.

question

You have a computer that runs Windows 7. The computer is a member of a domain. Windows Update settings are controlled through Group Policy. You need to determine if a specific security update from Windows Update is installed on the computer. What should you do?

answer

Go to Programs and Features in the Control Panel.

question

You have a computer that runs Windows 7. You would like to configure Windows update to download updates that Microsoft suggests, but does not mark as important. You would like to ensure that updates are installed on the computer without the intervention of an Administrative user. Select the settings that you should enable on the computer.

answer

Give me recommended updates the same way I receive important updates. Allow all users to install updates on this computer.

question

You have a computer that runs Windows 7. Recently, a WSUS server was configured and enabled in your internal network. Now you need to configure Windows Update on your computer to search for and download updates from the WSUS server. What should you do?

answer

Set the *Specify intranet Microsoft update service location* setting in Group Policy.

question

You have a computer running Windows 7. You want to configure Windows to prompt for additional credentials whenever a sensitive action is taken. What should you do?

answer

Edit User Account Control (UAC) settings.

question

You manage 20 computers running Windows 7 in a domain network. You want to prevent the Sales team members from making system changes. Whenever a change is initiated, you want to allow only those who can enter administrator credentials to be able to make the change. What should you do?

answer

Configure the *User Account Control: Behavior of the elevation prompt for standard users* setting in Group Policy to *Prompt for credentials*.

question

You have been asked to troubleshoot a Windows 7 computer that is a member of a workgroup. The director who uses the machine said he is able to install anything he wants as well as change system settings on-demand. He has asked you to figure out why User Account Control (UAC) is not being activated when he performs a sensitive operation. You verify that the director's user account is a standard user and not a member of the local Administrators group. You want the UAC prompt to show. What should you do?

answer

Enable the *Run all administrators in Admin Approval Mode* setting in Group Policy.

question

You have a computer running Windows 7. Prior to installing some software, you turn off User Account Control (UAC), reboot the computer, and install the software. You turn UAC back on, but it does not prompt you before performing sensitive actions. You want the protection of UAC, but it is not working at all. What should you do?

answer

Reboot the machine.

question

You have several Windows 7 computers in a domain network. When you install software on the new computers, you discover that it does not run because User Account Control (UAC) causes it to fail. Because the accounting program was designed by the company and it will not be upgraded anytime soon, you must get it to work as is with UAC. What can you do to get the application to work with UAC? (Choose the best solution.)

answer

Alter the program settings to *Run this program as an administrator*.

question

You have a computer running Windows 7 Ultimate. You want to modify the default settings for UAC to meet the following criteria: Prompts should be shown when programs make changes to your computer and when you make changes to Windows settings. The desktop should not be dimmed and locked out, but should allow you to continue working in other applications without responding immediately to the prompt. Settings should apply to all standard users. What should you do?

answer

Disable the *Switch to the secure desktop when prompting for elevation* setting in Group Policy.

question

Which of the following enables the user to manage, configure, or perform certain tasks on an object?

answer

Permissions

question

Which program or component includes User Accounts?

answer

Control Panel

question

What is Microsoft's directory service called?

answer

AD

question

What program do you use to manage fully all local users and group accounts on a computer running Windows 7?

answer

Computer Management console

question

Which of the following enables users to perform specific operating system tasks such as shut down the system or perform backups?

answer

User rights

question

What is a collection of computers that all utilize a central directory service for authentication and authorization and is usually associated with Active Directory?

answer

Domains

question

Which of the following is the process of granting an authenticated user a specific degree of access to specific computer or data resources?

answer

Authorization

question

What do you call it when you are loading an application, and you get a credential prompt that makes the rest of the screen dull and unclickable?

answer

Secure desktop

question

Which program is an MMC snap-in?

answer

Local Users and Groups

question

You are deploying Windows 7 in the accounting department. You discover that the users of the Windows 7 workstations will need the rights to change the network configuration of their local computers. What local group should you add the accounting users to on the Windows 7 computer? (Choose the most appropriate group)

answer

Network Configuration Operators

question

Which of the following do you have to create the same user account for on each computer that a user needs to access?

answer

Workgroups

question

Which account is designed for users that require only temporary access to the computer and is disabled by default?

answer

Guest

question

Which type of user profile is stored on a shared server drive, which makes it accessible from anywhere on the network?

answer

Roaming user profile

question

Which of the following is a series of folders associated with a specific user account that contains personal documents and personal settings?

answer

User profile

question

Which type of user profile is automatically created when a user logs on the computer for the first time and is stored on the computer's local hard drive?

answer

Local user profile

question

You have a computer running Windows 7 Professional. The computer is a member of a domain. The computer is used by several different users belonging to different groups. You have a custom application on the computer. You want to configure the firewall as follows: Allow a specific port used by the application. Open the port only for members of the Sales group. You want to make the change using the least amount of effort possible. What should you do?

answer

In Windows Firewall with Advanced Security, add an outbound rule. Require only secure connections for the rule, and add the Sales group to the list of authorized groups.

question

You have several computers running Windows 7 Ultimate. Corporate policy states that a specific connection-oriented application must be blocked from accessing the Internet. You must use the Windows Firewall with Advanced Security to complete the task. What should you do?

answer

Create an outbound rule blocking the corresponding TCP port on each machine.

question

You have several computers running Windows 7 Enterprise. The computers are connected to the network as shown in the image. You have configured static IP addresses for Comp1 and Comp2. To test the connection between the computers, you enter *ping 192.168.23.38* on Comp1's command prompt; however, the ping is unsuccessful and times out. You then use the *ping 192.168.23.231* on Comp2's command prompt, but the ping times out again.You need the ping commands to succeed between the two computers. What should you do?

answer

Permit ICMPv4 traffic through the firewalls of both computers.

question

You have several computers running Windows 7 Ultimate. The computers are members of a workgroup. You need to create many custom firewall rules on each computer. The rules must be specific for the Private network profile. You should complete the task with the least amount of effort as possible. What should you do? (Select two. Each answer is a complete solution.)

answer

Configure one computer with the Windows Firewall with Advanced Security MMC snap-in. Then use the same tool to export the settings and import settings on the remaining machines. Configure one computer. Use *Netsh advfirewall* to export the firewall settings. Import the settings on the remaining machines.

question

You have a computer running Windows 7 Enterprise. You need to change how Windows provides notifications when the firewall blocks a new program. Select the link that you would choose to make this change.

answer

Change notification settings.

question

You manage a laptop computer that runs Windows 7. As part of your security auditing strategy, you would like the system to record packets that have been dropped by firewall rules on your computer. You want to record only the packets dropped on public interfaces. You do not want to record information about allowed packets. What should you do?

answer

In Windows Firewall with Advanced Security, configure logging for the public profile.

question

You have a laptop running Windows 7 Enterprise. The laptop is used both in a public network and private (work) network. The work network contains FTP servers which hold sensitive data. To protect the data, you need to ensure that the computer can connect to FTP servers only while it is connected to the private (work) network. What should you do?

answer

From Windows Firewall with Advanced Security, create a new rule.

question

You have a computer running Windows 7 Ultimate. You need to configure Windows Firewall to allow traffic for an application that dynamically opens multiple ports on an as-needed basis. What should you do?

answer

Adda program exception.

question

You have a computer running Windows 7 Ultimate. The computer has both wired and wireless network connections. The wired connection is on the internal private network, but the wireless connection is a public connection. You need to allow help desk users to use Remote Assistance to help you across the wired network, but want to block any such access from the wireless network. You want to configure Windows Firewall to allow and deny access as described. What should you do?

answer

Enable the Remote Assistance exception only on the private profile.

question

You manage encrypted files or folders using the *Cipher* command. Drag the specific *Cipher* command on the left and drop it on the function performed on the right.

answer

Adds a recovery agent key > *Cipher /u* Generates recovery agent keys > *Cipher /r* Creates a new file encryption key > *Cipher /k* Displays the encryption state > *Cipher* Changes the certificate used to encrypt files > *Cipher /rekey*

question

Rodney, a user in the research department, uses a Windows 7 Professional laptop computer with a single NTFS volume. Rodney recently left the company on short notice. Rodney's manager, Kate, wants access to all of Rodney's files. You make Kate's account an administrator for Rodney's computer and give her the computer. Later, Kate informs you that she cannot open one of Rodney's documents, receiving an access denied message. You realize that Kate is trying to access a file that Rodney encrypted using EFS. You want to let Kate open the file. What should you do?

answer

Log on to the laptop using an account with DRA privileges. Clear the Encrypt attribute on the file.

question

You have a Windows 7 laptop that is shared by three users. The computer is not a member of a domain. Each user has been using EFS to encrypt their personal files on the laptop. You would like to add your user account as a recover agent so you can revery any encrypted file encrypted by any user on the laptop. You would like to store the recovery keys on a smart card. What should you do first?

answer

Run *cipher /r*.

question

You have a laptop running Windows 7 Ultimate edition. You have been encrypting files on your computer using EFS and a self-signed certificate. You now want to protect your encrypted files using a certificate on a smart card. You install a smart card reader and obtain a smart card with a new certificate. You want to make sure that all encrypted files use the certificate on the smart card. What should you do first?

answer

Run *rekeywiz*.

question

Rodney, a user in the research department, uses a Windows 7 Professional laptop computer with a single NTFS volume. Rodney shares the laptop with his manager, Kate. Rodney stores private company documents in the C:Data folder on his laptop. Both Rodney and Kate access the documents when they are using the laptop. Rodney is concerned about the documents falling into the wrong hands if his laptop if stolen. Rodney wants to protect the entire contents of the C:Data folder. You want to help Rodney encrypt the contents of the C:Data folder so that Kate and Rodney are the only authorized users. What should you do?

answer

Instruct Rodney to log on to his computer, edit the properties of the C:Data folder, and enable encryption. Add Kate as an authorized user for each file in the C:Data folder.

question

You have a computer that runs Windows 7. Mary and Mark share the computer. Mary encrypts a file by using Encrypting File System (EFS). When Mary attempts to grant Mark access to the file, she sees the dialog shown in the image. You need to ensure that Mary can grant Mark access to the file. What should you do?

answer

Instruct Mark to log on to the computer and encrypt a file.

question

You have a Windows 7 laptop that is shared by three users. The computer is a member of a domain. Each user has been using EFS to encrypt their personal files on the laptop. You would like to add your user account as a recovery agent so you can recover any encrypted file encrypted by any user on the laptop. You would like to store the recovery keys on a smart card. You install a smart card reader and obtain a new smart card with a certificate that can be used for EFS recovery. You add a data recovery agent using Group Policy. What should you do next?

answer

Have each user run *cipher /u*.

question

You have two computers that run Windows 7 Ultimate: Comp1 and Comp2. Both computers are members of a HomeGroup; neither computer is a domain member. On Comp1, you share the C:Files folder with the HomeGroup. The C:Filesdata.doc file is encrypted. From Comp2, you can access all of the files in the C:Files folder except for the data.doc file. What should you do?

answer

Copy your private key from Comp1 to Comp2.

question

You have two computers that run Windows 7 Professional: Comp1 and Comp2. Both computers are members of a domain. You have a domain user account named EFS-Recovery. You use the user account to recover some files on Comp1. You need to recover some files on Comp2, but are unsuccessful. What should you do?

answer

Export the recovery agent keys from Comp1 and import them to Comp2.

question

You have a two computers: Comp1 is running Windows XP Professional and Comp2 is running Windows 7 Professional. After moving EFS-encrypted files from Comp1 to Comp2, no one can open the files and access the data. You need to open the EFS-encrypted files on Comp1. What should you do? (Select two. Each answer is a complete solution.)

answer

Use *Cipher.exe* to transfer the encryption certificates. Use USMT to transfer the encryption certificates.

question

Your Windows 7 computer has two hard drives as shown in the *Exhibit*. The C:Finances folder and its contents have been encrypted. You need to move the C:FinancesReports.xls file to the D: drive. You want the file to remain encrypted. You want to accomplish this with the least amount of effort possible. What should you do?

answer

Run the *convert* command, followed by the *xcopy* command.

question

You manage a laptop that runs Windows 7. The laptop is shared by members of the Sales team. Sales team members use standard user accounts to log on to the computer. You want to allow users to change the system time and the time zone. You need to grant them this ability while limiting their ability to perform unrelated tasks. What should you do?

answer

Configure user rights for the Sales group in the local security policy.

question

You have several computers running Windows 7 Ultimate. The computers are members of a domain. For all the computers, you want to remove access to administrative tools from the Start menu and hide notifications from the System Tray. What should you do?

answer

Use Group Policy

question

Your organization has decided to implement a wireless infrastructure. They require that the infrastructure be capable of central administration and logging. Based on this information what is the best solution?

answer

WPA-Enterprise

question

What technology uses the remote client to connect to a remote access server over the Internet?

answer

VPN

question

What does L2TP use to encrypt data?

answer

IPsec

question

What do you use to synchronize between your computer, offline drives, and mobile devices?

answer

Sync Center

question

If you don?t have TPM, how else can you use BitLocker?

answer

Store the encryption key on a USB flash drive.

question

Which wireless technology is considered a weak encryption protocol?

answer

WEP

question

Which tool set is designed specifically for mobile PCs?

answer

Windows Mobility Center

question

What user account has the ability to recover BitLocker drives for an entire organization?

answer

Data recovery agent

question

Which VPN protocol connects using SSL?

answer

SSTP

question

What protocol does DirectAccess use to encrypt network communications?

answer

IPSec

question

__________ is used as an external display that displays images on a screen.

answer

Display projector

question

What technology is used to encrypt removable USB devices?

answer

BitLocker To Go

question

Which command is used to manage power?

answer

Powercfg.exe

question

Which technology is the most common to connect to a wireless network for a corporation that allows a data rate up to 54 MB/sec?

answer

802.11g

question

What component is used to ensure that all clients meet a minimum set of criteria such as up-to-date anti-virus protection and Windows updates?

answer

Network Access Protection

question

How can you execute commands on a remote computer?

answer

Use winrs.exe.

question

Which program enables you to connect to a remote computer including servers with no interaction required from the remote computer?

answer

Remote Desktop

question

What type of backup creates a separate backup of the computer?s system disk and reserve partition that Windows 7 creates on the disk during installation and saves to a VHD file on the backup device?

answer

System image backup

question

What command do you use to allow remote management communications on a PC so that you can use winrs.exe?

answer

winrm quickconfig

question

What option starts the computer with a minimal set of generic drivers which are needed to run the system?

answer

Safe mode

question

You load a driver for your motherboard and now the system does not boot properly. What should you do to overcome this problem? (Choose the best answer.)

answer

Use the Last Known Good Configuration.

question

Where is the boot menu configuration stored?

answer

BCD registry file

question

What command do you use to start the System Configuration Tool?

answer

Msconfig

question

What are duplicates of files that Windows creates as part of a restore point?

answer

Volume shadow copy

question

Which of the following requires invitations to use?

answer

Remote Assistance

question

What format supports Virtual PCs that contain the entire content of a hard disk in a single, portal file?

answer

VHD

question

You want to view the logs shown in the Event Viewer on a remote computer. What should you do?

answer

Use the Connect To Another Computer command in the Action Menu within the Event Viewer.

question

You are working on a Windows 7 system that continuously fails once you logon to the system. You suspect that a startup application is causing the issue. What can you do to successfully logon to the system

answer

Hold on the Shift key while logging on to the system

question

Your company will upgrade to Windows Server 2012. The present environment is Windows Server 2008 R2 servers or higher. What is the best path to upgrade to Windows Server 2012?

answer

Clean installation of Windows Server 2012.

question

What factor is not important for choosing the best Windows Server 2012 edition for your environment?

answer

heating and cooling system of the datacenter

question

File and Storage Services falls into which of the following basic role categories:

answer

Application Services

question

Using Features on Demand results in saving potentially significant amounts of disk space. Features on Demand becomes a third installation state per feature in Windows Server 2012. While previous versions allowed only Enable or Disable, Features on Demand provides _______.

answer

Disabled and deleted

question

The difference between in-place upgrade and a migration is ________.

answer

A migration copies vital information from the existing Server to a clean installation of Windows 2012.

question

You decide to change the interface on your Windows Server 2012 server. Select the best answer to convert a GUI server to Server Core.

answer

Use Server Manager to start the Remove Roles and Features Wizard.

question

You want to add a role to several Windows Server 2012 systems on the network. Which of the following is correct?

answer

Use Server Manager on any Windows Server 2012 to connect and install the role to all the systems.

question

Your company uses virtualized servers extensively and has many offline VMs. A role must be added to some offline VHDs. What do you do?

answer

After selecting Add Roles and Features, you can browse for the offline VHD.

question

Windows Server 2012 provides hardware-independent NIC teaming or bonding to allow for better network performance and adapter fault tolerance. However, in what scenario is the NIC teaming limited?

answer

When network traffic consists of large TCP sequences

question

On a Windows Server 2012 server, you decide to change the interface. Select the best answer to convert a GUI server to Server Core.

answer

Use Server Manager to start the Remove Roles and Features Wizard.

question

What was the partition style(s) prior Windows Server 2008 and Windows Vista?

answer

Master Boot Record (MBR) only

question

After you create a new VHD, it appears as a _________ in the Disk Management snap-in and in Server Manager.

answer

uninitialized disk

question

What RAID levels are supported by Windows Server 2012?

answer

RAID levels 0, 1, and 5

question

What physical disk technology runs at 600 MB/sec. However, it is no longer suitable for large enterprise servers.

answer

SATA

question

What is the minimum number of physical disks required to create a RAID 5 volume?

answer

3

question

Using File and Storage Services in Server Manager, you will create a new share. The New Share Wizard prompts you for a profile. You need a profile that provides basic NFS sharing with authentication and permissions. Which do you choose?

answer

NFS Share-Quick

question

You grant a user the NTFS permissions needed to access a file. You then move the file to a different location. Is the user still able to access the file?

answer

Yes, when you move the file, its permissions go with it.

question

When you manage permissions in any of the Windows Server 2012 permission systems, you are actually creating and modifying the _______ in an _______.

answer

access control entries; access control list

question

Using File and Storage Services in Server Manager, you will create a new share. The New Share Wizard prompts you for a profile. You need a profile that provides SMB sharing with full share and NTFS permissions and access to services provided by File Server Resource Manager. Which do you choose?

answer

SMB Share-Advanced

question

What is the primary tool in Windows Server 2012 to take control of the shares on all your disks on all your servers and exercise granular control over their properties?

answer

File and Storage Services in Server Manager

question

What is XML Paper Specification (XPS)?

answer

print job files stay a single document format to the print device, rather than conversion through EMS and PCL

question

To configure a printer pool, you enabled printer pooling on the Ports tab under Printer Properties. You have five print devices ready for the printer pool. Of those five, four are in one room. Of the four, three use the same print driver. Of those three, two print devices are identical. How many print devices are in your printer pool?

answer

3

question

What are the differences, physically and logically, between the two printing configurations: Network-attached Printing and Network-attached Printer Sharing?

answer

They are essentially the same physically. Logically, the print jobs are handled differently.

question

Which of the following is NOT a basic printer permission?

answer

Take ownership

question

You have an executive who needs her print jobs handled above those of others. How would you accomplish this advanced printing configuration?

answer

Connect multiple print servers to a single print device

question

What is the default web address for the PowerShell Web Access Gateway?

answer

https:///pswa

question

Considering the different ways to remotely manage servers, what allows administrators to use their web browser as a remote management gateway?

answer

Windows PowerShell Web Access Gateway

question

Considering the different ways to remotely manage servers, what does Microsoft recommend we connect to other servers instead of a Window Server 2012?

answer

Windows workstation

question

Considering the different ways to remotely manage servers, which allows you to create server groups?

answer

Server Manager

question

When you originally deployed the AccServer virtual machine on your Windows Server 2012 hypervisor, it stored accounting data from all departments in your orgranization and therefore required a very large virtual disk. However, as your organization has grown, additional department-specific accounting servers have been deployed and much of the data that used to be stored on AccServer has been migrated to them. Because the virtual hard disk file for the AccServer virtual machine is set to grow dynamically, the now unused space in the file can now be reclaimed on the physical hard drive in the Windows server. Click on the option you would use in the Edit Virtual Hard Disk Wizard to do this without reducing the overall storage capacity of the virtual hard disk.

answer

Compact

question

You need to add additional disk space to the AccServ virtual machine running on a Windows Server 2012 hypervisor. to accomplish this, you decide to create a pass-through disk. Click the option you would use in the virtual machine's Settings screen to do this.

answer

Physical hard disk:

question

Which Hyper-V feature in Windows Server 2012 allows you to create read-only parent virtual hard disk files that are linked to child virtual hard disk files that contain only changes made to the parent disk?

answer

differencing disks

question

You are working in Hyper-V Manager on your Windows Server 2012 system. This system hosts several Windows Server 2008 R2 virtual machines. You create snapshots of these virtual machines nightly as part of your disaster recovery plan. Users are complaining that they can no longer access the virtual servers. In Hyper-V Manager, they are identified as being in a Paused-Critical state. What should you do? (Select two. Each answer is part of the overall solution.)

answer

Install a new physical hard disk in the hypervisor host. Move the snapshot files to the new hard disk.

question

You have decided to install multiple virtual servers, all running Windows Server 2011, on a single physical computer. You install Hyper-V on a server that is running Windows Server 2012 Datacenter edition. You need to install the following virtual machines: 3 servers running the Windows Server 2008 Standard edition (32-bit) 4 servers running the Windows Server 2008 R2 Standard edition (64-bit) 3 Servers running the Windows Server 2012 Datacenter edition (64-bit) To conserve disk space, you decide to use parent and differencing disks. You need to create the virtual hard disks used by the virtual machines. What should you do?

answer

Create 3 fixed disks and 10 differencing disks.

question

You want to use Hyper-V to create two virtual machines, with each using a common parent installation. Listed below are the steps necessary to complete the configuration. Drag each required step from the list on the left to the spaces on the right. Use only the necessary steps to complete the configuration.

answer

Step 1 Create one fixed disk. Step 2 Create the virtual machine(s) Step 3 Install the operating system Step 4 Install integration services Step 5 Make the disk(s) read only Step 6 Create two differencing disks Step 7 Create the virtual machine(s) Step 8 Step 9

question

You currently manage a virtual machine named VM12 that has been installed on the Srv5 physical server. The virtual machine uses a single fixed disk of 100 GB saved in the vdisk1.vhd file. Physical disk space on the server is getting low. When you run Disk Management within the virtual machine, you notice that only 30 GB of space is being used, but the vdisk1.vhd file occupies 100 GB. You want to reduce the physical size of the virtual hard disk What should you do?

answer

Convert the disk to a dynamically expanding disk named vdisk2.vhd. Delete vdisk1.vhd, and rename vdisk2.vhd to vdisk1.vhd.

question

You currently manage a virtual machine named VM18 that has been installed on the Srv5 physical server. The virtual machine uses a single dynamic disk of 100 GB. You notice that the physical size of the virtual hard disk is 40 GB, but that the virtual machine reports only a total of 20 GB of files. You want to reduce the physical space used by the virtual hard disk. What should you do?

answer

Compact the disk.

question

You have previously used Hyper-V to create a parent installation of Windows 7 with three child installations. Child virtual systems are named Client1, Client2, and Client3. The parent virtual hard disk file is named parent vhd, with differencing disks named Client1.vhd, Client2.vhd, and Client2.vhd. You decide that you want to configure the Client2 virtual machine so that it no longer uses a differencing disk. The remaining two virtual machines should continue to use differencing disks from the parent. What should you do?

answer

Merge Client2.vhd with Parent.vhd creating a new file named Client2a.vhd. Delete Client2.vhd and rename Client2a.vhd to Client2.vhd.

question

You currently manage a virtual machine named VM18 that has been installed on the Srv5 physical server. The virtual machine runs Windows Server 2012 Enterprise edition and a custom application. You receive an update to the application. You want to save the current state so that if the update causes any problem,s you can easily revert back to the state before the update was installed. What should you do?

answer

Take a snapshot of the virtual machine.

question

You currently manage a virtual machine named VM12 that has been installed on the Srv5 physical server. The virtual machine uses a single fixed disk of 40 GB saved in the vdisk1.vhd file. The virtual machine is running out of free disk space. The virtual machine currently uses about 39.5 GB of the available disk space. You need to add more disk space to the virtual machine. What should you do?

answer

Expand the vdisk1.vhd disk.

question

You are the network administrator for *westsim.com*. The network consists fo a single Active Directory domain. All the servers run Windows Server 2012 and all the clients run Windows 8. You are responsible for a server named HV1 that has the Hyper-V role installed. HV1 hosts a virtual machine that runs a custom web application that is in use 24 hours a day. The virtual machine has one hard drive that is hosted on a 127 GB expanding virtual hard drive (.vhd). The server is running out of room. Management would like to upload 100 GB of new media files for use in the web application. You need to provide more storage space inside the virtual machine while minimizing the downtime for the custom web application. What should you do?

answer

Add a new virtual hard dive (.vhd) to a SCSI controller.

Flashcards and Answers – Windows 7 Configuration

Unlock all answers in this set

Haven't found what you were looking for?

Search for samples, answers to your questions and flashcards