Practice Exam, National Pesticide Applicator Certification Core Manual – Flashcards
Unlock all answers in this set
Unlock answersquestion
Breeding or selecting plants and animals with characteristics for resistance to pests is an example of which type of pest management method? A. Biological control. B. Mechanical control. C. Genetic Control. D. Physical/ environmental modificaiton.
answer
C
question
Using a plow to destry weeeds is an example of which type of mechanical control method? A. Exclusion. B. Trapping. C. Cultivation. D. Physical/ environmental modification.
answer
C
question
Which statement is true about chemical control as a pest management method? A. Pesticides play a key role in pest management programs and sometimes are the only control method available. B. Pesticides include any material that is applied to plants and the soil but not to water or harvested crops. C. A highly selective pesticide controls a wide variety of pests. D. Systemic pesticides are not absorbed by treated plants or animals.
answer
A
question
Which statement is true about pest management goals? A. Pestcides are never used to prevent pests. B. Preventive and suppressive pest control goals are rarely combined. C. Cultiviation and mowing of weeds are ways to prevent and suppress pest populations. D. Over large areas, eradication is a practical approach to pest cotnrol.
answer
C
question
Which term describes the pest population density that causes the losses equal to the cost of control measures? A. Economic threshold. B. Economic injury level. C. Action threshold. D. Pest threshold.
answer
B
question
Which would decrease the likelihood of pesticide resistance? A. Increasing label dosages. B. Using pesticides from the same class of chemicals. C. Applying the pesticide over a wide area. D. Using pesticides with multiple sites of toxicity in an organism.
answer
D
question
Which federal law requires employers to provide agricultural workers and pesticide handlers with protections against possible harm form pesticides? A. Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA). B. Federal Food, Drug, and Cosmetic Act (FFDCA). C. Food Quality Protection Act (FQPA). D. Workers Protection Standard (WPS)
answer
D
question
What are the two main classifications of pesticides under FIFRA? A. Organic and inorganic. B. General-use and unclassified use. C. Regulated and unregulated. D. Unclassified use and restricted-use
answer
D
question
What is a tolerance as set by the EPA? A. The maximum amount of pesticides residue that may legally remain on or in a commodity at the time of harvest or slaughter. B. The maximum amount of pesticide residue that workers may be exposed to during the course of an average workday. C. The minimum amount of pesticide residue that may remain on a crop during the growing season. D. The minimum amount of pesticide residue that may be consumed by a 150-pound person on a yearly basis.
answer
A
question
Which of the following section sections under FIFRA could be used to alow the use of an unregistered pesticide to control an "emergency" pest problem? A. Section 3 B. Section 18 C. Section 24 (c) D. Section 25 (b)
answer
C
question
The name "VIP No Pest 75WP" on a pesticide label indicates: A. The chemical name and 75 percent inert ingredients formulated as a wettable powder. B. The brand name and 25 percent active ingredients, formulated as a wettable powder. C. The brand name and 75 percent active ingredients, formulated as a wettable powder. D. The chemical name and 25 percent active ingredients, formulated as a wettable powder.
answer
C
question
Which signal word appears on a label with a skull and crossbones symbol? A. DANGER-POISON. B. DANGER C. WARNING D. CAUTION
answer
A
question
Which statement is true about protective clothing and equipment statements? A. Pesticide labels are very consistent in the type of information they contain on protective clothing and equipment. B. When a respirator is required, the model is always specified on the label. C. It is not necessary to follow all advice on protective clothing or equipment that appears on the label. D. If a pesticide label does not specifically mention a type of protective clothing or equipment that does not rule out the need for the additional protection or equipment.
answer
D
question
"This product is highly toxic to bees" is an example of which type of precautionary statement? A. Acute toxicity hazard. B. Environmental hazard. C. Physical or chemical hazard. D. Agricultural use requirement.
answer
B
question
Which is true about REIs (restricted-entry intervals)? A. The pesticide manufacturer sets REIs B. The REI statement is most often listed under "Non-agricultural use requirements." C. REIs are not covered under the EPA's Worker Protection Standard (WPS). D. If there are multiple REIs on a label, the REIs are usually found at the beginning of each use section for each crop.
answer
D
question
How much active ingredient is there in a 20-pound bag of Atrazine 90DF? A. 4 pounds. B. 9 pounds. C. 18 pounds. D. 20 pounds.
answer
C
question
What type of pesticide formulation consists of a liquid dispersed as droplets in another liquid and may require agitiation? A. Microencapsulated. B. Solution. C. Suspension. D. Emulsion.
answer
C
question
Which liquid pesticide formulation contains solid particles that do not dissolve in either water or oil and may contribute to abrasive wear of nozzles and pumps? A. Ultra-low volume (ULV). B. Invert emulsions. C. Aerosols (A). D. Flowables (F)/ Liquids (L).
answer
D
question
Which dry/solid formulation requires constant agitation and may be abrasive to pumps and nozzles and cause them to wear out quickly? A. Dusts (D) B. Granules (G) C. Wettable powders (WP) D. Soluble powders (SP)
answer
C
question
Which type of dry/solid pesticide formulation is always dry and can easily drift to non-target sites? A. Dusts. B. Granules. C. Pellets. D. Baits.
answer
A
question
What type of formulation covers either a liquid or dry pesticide particle with platic? A. Pellets. B. Microencapsulates. C. Water-soluble packets. D. Water-dispersible granules.
answer
B
question
Which statement is true about adjuvants? A. They posses pesticidal activity. B. They must be registered by the U.S. Environmental Protection Agency. C. Adjuvants often increase spray application problems. D. Adjuvants are either premixed in the pesticide formulation or added to the spray tank mixture.
answer
D
question
Which type of adjuvant increases the adhesion of solid particles to target surfaces? A. Compatibility agents. B. Stickers C. Drift retardants. D. Defoaming agents.
answer
B
question
Which equation reflects the relationship between pesticide safety concerns? A. Hazard=toxicity x exposure. B. Toxicity=hazard x exposure. C. Exposure= hazard x toxicity. D. Hazard=exposure x risk
answer
A
question
Which statement is true about the LD50 and LC50? A. The LD50 and LC50 measure multiple toxic effects. B. The LD50 and LC50 translate directly to humans. C. The LD50 and LC50 measure the potential buildups of effects due to multiple exposures. D. The LD50 and LC50 measure acute toxicity.
answer
D
question
Which signal word is associated with Hazard Class III (i.e, small to medium dose could cause death, illness, or skin, eye, or respiratory damage) and must have the Spanish word "Aviso" on the label? A. DANGER-POISON B. DANGER C. WARNING D. CAUTION
answer
C
question
What should be done if cholinesterase levels fall significantly below baseline? A. Have the pesticide handler increase the use of personal protective equipment until the cholinesterase level builds back up again to normal levels. B. Remove the pesticide handler fromm pesticide exposure for at least one year. C. Remove the pesticide handler from pesticide exposure until such time as the cholinesterase level builds back up again to normal levels. D. Seek medical attention immediately for the pesticide handler and have them avoid mixing and loading pesticides for 48 hours after the last exposure.
answer
C
question
What would be the first objective if dermal exposure to a pesticide has occured? A. Get the victim to fresh air immediately. B. Administer artificial respiration. C. Rinse the pesticide off to prevent absorption. D. Apply a first-aid ointment to the affected area.
answer
C
question
Which statement is true about inducing vomiting for a victim of oral pesticide exposure? A. Always induce vomiting after a victim has swallowed a pesticide. B. Induce vomiting with the victim lying flat on his back. C. Ipecac syprup is routinely recommended to induce vomiting. D. Before inducing vomiting, first give the victim at least 2 glasses of water to dilute the product.
answer
D
question
What type of PPE should you wear during an application if large amounts of a pesticide could be deposited on your clothing over an extended period of time? A. A coverall made of a cottonsynthetic blend. B. A chemical-resistant suite made of rubber or plastic. C. A chemical-resistant rubber apron. D. Long-sleeved shirt and long pants made of a woven cotton fabric.
answer
B
question
Which is the appropriate way to wear gloves and footwear for a job in which you will be working with your arms raised some of the time and lowered some of the time? A. Wear gloves with your sleeves over them and put your pant legs outside your boots. B. Wear gloves outsie of your sleeves and war your pant legs inside your boots. C. Wear gloves with a cuff closed tightly outside the sleeve and wear your pant legs inside your boots. D. Wear gloves with a cuff closed tightly outside the sleeve and wear your pant legs outside your boots.
answer
D
question
Which statement is true about respiratory protection? A. Air-purifying respirators supply additional oxygen. B. All respirators are approved by the EPA. C. Filters are classified on the basis of oil degradation resistance and filter efficiency. D. Non-powered particulate respirators use a fan to help draw air through a cartridge.
answer
C
question
Which statement is true about replacing reusable PPE? A. Reusable items need to be replaced only at the end of the work season. B. Gloves generally last longer than footwear, aprons, headgear, and protective suits. C. Glove replacement is a high priority. D. If PPE is starting to thin out, it can be reused as long as there are no holes.
answer
C
question
What should you do with clothing made of cotton or polyester that has been heavily contaminated with pesticides labeled with the signal word DANGER-POISON, DANGER, OR WARNING? A. Discard such items in a hazardous waste collection site. B. Discard items with regular trash. C. Launder the itms separately from other clothing using two entire wash cycles. D. Launder the items separately using one wash cycle, and line dry.
answer
A
question
Which practice would help prevent groundwater or surface water contamination? A. Eliminate grass strips that are between treated fields and streams. B. Store and mix herbicides around abandoned wells. C. Select pesticides that tightly adsorb to soil and are not persistent. D. Apply pesticides broadly over large areas.
answer
C
question
Which statement is true about factors affecting spray drift? A. Ground applications usually produce more spray drift than aerial appplications. B. High rates of evaporation and high temperatures reduce drift. C. For reducing drift potential, spraying at midday is usually best. D. Spraying during temperature inversions can result in significant long-distance drift.
answer
D
question
Which statement is true about pesticide effects on non-target organisms? A. Dirft is one of the primary causes of damage to crops and other plants in adjacent areas. B. Granular or pellleted pesticide fromulations are the safest for preventing injury to birds and other animals. C. Most livestock poisoning by pesticides occurs when they breathe in vapors from nearby treated fields. D. Very few herbicides can cause phytotoxic injury.
answer
A
question
Which items should be stored at the pesticide storage site? A. Food and feed. B. PPE for mixing and loading and medical supplies. C. Spill cleanup kit and emergency PPE. D. Medication and veterinary supplies.
answer
C
question
Which statement is true about storage of pesticide containers? A. You may store pesticides in bottles or jars as long as they are appropriately labeled. B. Keep bags of wettable and soluble powders open, so they are exposed tothe air. C. Store liquid formulations and small containers of dry formulations on wood shelving. D. Place bulk or mini-bulk tanks on a reinforced concrete pad or other impermeable surface.
answer
D
question
What should be done with cancelled pesticide products that can no longer be legally used? A. Use them up by applying them at a rate greater than specified by the label. B. Store them in the same area as other pesticides but mark them as outdated. C. Recycle them by mixing them with other pesticide products. D. Treat as hazardous waste and dispose of accordingly.
answer
D
question
Which statement is true about potential problems from pesticide fires? A. Pesticides containing oils or petroleum products are the least flammable. B. Vapors or smoke from pesticide fires may be harmful to animals but not to plants. C. Pesticides may be flammable but never explosive. D. Runoff from a pesticide fire site may contain highly toxic chemicals.
answer
D
question
Which is not recommended safety precaution for a pesticide storage facility? A. Locate storage facilities as far as possible from places where people and animals live. B. Post signs that indicate combustible materials are stored at the facility. C. Store glass or pressurized containers in sunlight. D. Keep foam-type fire extinguishers in all storage areas.
answer
C
question
Which statement is true about chemical incompatibility? A. It is not necessary to consider chemical compatibility effects when mixing a pesticide with hard water, chlorinated water, or fertilizers. B. Increasing the chemial activity of two or more products mixed together is always harmful. C. Chemical incompatibiltiy occurs when the activity of the mixed products is reduced. D. Labels do not proved information on avoiding chemical incompatibility.
answer
C
question
Which is not a means of preventing contamination of water sources? A. When filling the tank, keep the hose down in the pesticide mixture. B. Use a check valve, anti-siphoning device, or backflow preventer when pumping water directly from the source into a mix tank. C. Mix and load pesticides on a containment pad. D. Locate mixing equipment so that leaks or spills flow away from a drain or water source.
answer
A
question
Which statement is true about cleaning pesticide equipment? A. Always wash equipment in the same locations unless you use a containment pad or tray. B. There is very little risk of pesticide exposure during equipment cleanup. C. It is a good idea to wait until the end of the work week before cleaning up equipment. D. Sloppy cleanup practices are one of the main causes of equipment failure or malfunction.
answer
D
question
Which type of pesticide application procedures would you use to apply a herbicide between the rows of crops? A. Broadcast application. B. Band appliation. C. Crack and crevice application. D. Foliar application.
answer
B
question
You are applying pesticide to a rectangular area that is 50 feet long by 20 feet wide. What is the area in square feet? A. 70 square feet B. 100 square feet C. 500 square feet D. 1,000 square feet
answer
D
question
You determined from a calibration test that your boom sprayer delivers 8 galoons of water over a 0.25-acre (1/4 acre) test area. You need to apply pesticide to a 10-acre field. How much spray mixture is needed for the 10-acre application area? A. 80 gallons. B. 120 gallons. C. 320 gallons. D. 400 gallons.
answer
C
question
From your calibration test, you determine that your backpack sprayer delivers 0.25 gallon of water to cover a 250-square-foot test area. The label recommends applying pesticide at a rate of 6 ounces of product per gallon. How many ounces of product are needed to cover a 1,000-squarefoot applicaito area? A. 6 ounces B. 12 ounces C. 18 ounces D. 24 ounces
answer
A
question
Which would likely be an inappropriate way to explain a pest control procedure to the customer? A. Telling the customer what you are spraying for and also showing him the problem. B. Assuring the customer that he/she will receive 100 percent control after one application. C. Informing the customer of post-application label instructions. D. Explaining to the customer factors that have contributed ot the pest problem.
answer
B
