power tools module – Flashcards

Unlock all answers in this set

Unlock answers
question
When using power tools,never engage the
answer
trigger lock
question
Before replacing parts such as bit,blades,or discs on any tool,you must.
answer
disconnect the power source
question
most hammer drills will not hammer until pressures is.
answer
applied to the drill bit
question
A pneumatic drill is commonly used
answer
when there no source of electricity
question
Never use a circular saw that does not have an upper blade guard because the.
answer
guard protects you from touching the blade.
question
When using a circular saw,be sure to cut on the waste side of the cut mark to allow of the blade's.
answer
Kerf
question
Saws with fine blades that are excellent for delicate and intricate cutting are called.
answer
saber saw
question
Before you plug any saw into the power source make sure the.
answer
power switch is in the off position.
question
A saw the has a thin, one-piece blade that runs around guides at either end of the saw is a.
answer
bandsaw
question
A power miter saw combines a miter box with a.
answer
circular saw
question
A angle grinder is used to grind.
answer
hard, heavy materials
question
The adjustable tools rest on a bench grinder should be positioned.
answer
1/8 inch from the grinder wheel
question
A good way to check the condition of the grinding wheel on a bench grinder is to
answer
Perform a ring test on the wheel
question
A grinder can catch on rough material edges and shift around, especially when using rotary bits called
answer
Burr bits
question
A low-velocity fastening system that is used to drive steel pins or threaded studs into masonry and steel is a(n)
answer
Powder-actuated tool
question
Special training and certification is required before using any kind
answer
Powder-actuated fastening tool
question
Before using a pneumatically powered nailer for the first time, it is important to
answer
Read the manufacturer's instructions
question
If a pneumatic nailer is not firing properly, before attempting repairs be sure to
answer
Disconnect the air hose
question
A power tool that is well suited for breaking up concrete during demolition work is a(n)
answer
Pavement breaker
question
A Porta-Power® is an example of a(n)
answer
Hydraulic tool
Get an explanation on any task
Get unstuck with the help of our AI assistant in seconds
New