Security + – Flashcards

Answer: A Explanation: Port Address Translation (PAT), is an extension to network address translation (NAT) that permits multiple devices on a local area network (LAN) to be mapped to a single public IP address. The goal of PAT is to conserve IP addresses. Most home networks use PAT. In such a scenario, the Internet Service Provider (ISP) assigns a single IP address to the home network's router. When Computer X logs on the Internet, the router assigns the client a port number, which is appended to the internal IP address. This, in effect, gives Computer X a unique address. If Computer Z logs on the Internet at the same time, the router assigns it the same local IP address with a different port number. Although both computers are sharing the same public IP address and accessing the Internet at the same time, the router knows exactly which computer to send specific packets to because each computer has a unique internal address.

Answer: A Explanation: Firewalls, routers, and even switches can use ACLs as a method of security management. An access control list has a deny ip any any implicitly at the end of any access control list. ACLs deny by default and allow by exception.

Answer: D Explanation: PAT would ensure that computers on ABC's LAN translate to the same IP address, but with a different port number assignment. The log information shows the IP address, not the port number, making it impossible to pin point the exact source.

Answer: C Explanation: Ip tables are a user-space application program that allows a system administrator to configure the tables provided by the Linux kernel firewall and the chains and rules it stores.

Answer: B Explanation: Stateful inspections occur at all levels of the network.

Answer: C Explanation: The basic purpose of a firewall is to isolate one network from another.

Answer: B Explanation: Port Address Translation (PAT), is an extension to network address translation (NAT) that permits multiple devices on a local area network (LAN) to be mapped to a single public IP address. The goal of PAT is to conserve IP addresses. Most home networks use PAT. In such a scenario, the Internet Service Provider (ISP) assigns a single IP address to the home network's router. When Computer X logs on the Internet, the router assigns the client a port number, which is appended to the internal IP address. This, in effect, gives Computer X a unique address. If Computer Z logs on the Internet at the same time, the router assigns it the same local IP address with a different port number. Although both computers are sharing the same public IP address and accessing the Internet at the same time, the router knows exactly which computer to send specific packets to because each computer has a unique internal address.

Answer: D Explanation: Disabling unused switch ports a simple method many network administrators use to help secure their network from unauthorized access. All ports not in use should be disabled. Otherwise, they present an open door for an attacker to enter.

Answer: B Explanation: Load balancing refers to shifting a load from one device to another. A load balancer can be implemented as a software or hardware solution, and it is usually associated with a device—a router, a firewall, NAT appliance, and so on. In its most common implementation, a load balancer splits the traffic intended for a website into individual requests that are then rotated to redundant servers as they become available.

Answer: D Explanation: A proxy is a device that acts on behalf of other(s). In the interest of security, all internal user interaction with the Internet should be controlled through a proxy server. The proxy server should automatically block known malicious sites. The proxy server should cache often-accessed sites to improve performance.

Answer: C Explanation: Network-based intrusion prevention system (NIPS) monitors the entire network for suspicious traffic by analyzing protocol activity.

Answer: A Explanation: Host-based intrusion prevention system (HIPS) is an installed software package which monitors a single host for suspicious activity by analyzing events occurring within that host.

Answer: A Explanation: Network-based intrusion prevention system (NIPS) monitors the entire network for suspicious traffic by analyzing protocol activity. The main functions of intrusion prevention systems are to identify malicious activity, log information about this activity, attempt to block/stop it, and report it

Answer: B Explanation: Network-based intrusion prevention system (NIPS) monitors the entire network for suspicious traffic by analyzing protocol activity. The main functions of intrusion prevention systems are to identify malicious activity, log information about this activity, attempt to block/stop it, and report it

Answer: B Explanation: The administrator is the person responsible for setting the security policy for an organization and is responsible for making decisions about the deployment and configuration of the IDS.

Answer: C Explanation: A signature-based monitoring or detection method relies on a database of signatures or patterns of known malicious or unwanted activity. The strength of a signature-based system is that it can quickly and accurately detect any event from its database of signatures.

Answer: A Explanation: A signature based IDS will monitor packets on the network and compare them against a database of signatures or attributes from known malicious threats.

Answer: B Explanation: Anomaly-based detection watches the ongoing activity in the environment and looks for abnormal occurrences. An anomaly-based monitoring or detection method relies on definitions of all valid forms of activity. This database of known valid activity allows the tool to detect any and all anomalies. Anomaly-based detection is commonly used for protocols. Because all the valid and legal forms of a protocol are known and can be defined, any variations from those known valid constructions are seen as anomalies.

Answer: B Explanation: A protocol analyzer is a tool used to examine the contents of network traffic. Commonly known as a sniffer, a protocol analyzer can be a dedicated hardware device or software installed onto a typical host system. In either case, a protocol analyzer is first a packet capturing tool that can collect network traffic and store it in memory or onto a storage device. Once a packet is captured, it can be analyzed either with complex automated tools and scripts or manually.

Answer: B,C Explanation: To establish a TCP connection, the three-way (or 3-step) handshake occurs: SYN: The active open is performed by the client sending a SYN to the server. The client sets the segment's sequence number to a random value A. SYN-ACK: In response, the server replies with a SYN-ACK. The acknowledgment number is set to one more than the received sequence number i.e. A+1, and the sequence number that the server chooses for the packet is another random number, B. ACK: Finally, the client sends an ACK back to the server. The sequence number is set to the received acknowledgement value i.e. A+1, and the acknowledgement number is set to one more than the received sequence number i.e. B+1.

Answer: B Explanation: The question asks how to prevent access to peer-to-peer file sharing websites. You access a website by browsing to a URL using a Web browser or peer-to-peer file sharing client software. A URL filter is used to block URLs (websites) to prevent users accessing the website. Incorrect Answer: A: A spam filter is used for email. All inbound (and sometimes outbound) email is passed through the spam filter to detect spam emails. The spam emails are then discarded or tagged as potential spam according to the spam filter configuration. Spam filters do not prevent users accessing peerto- peer file sharing websites. C: Content inspection is the process of inspecting the content of a web page as it is downloaded. The content can then be blocked if it doesn't comply with the company's web policy. Contentcontrol software determines what content will be available or perhaps more often what content will be blocked. Content inspection does not prevent users accessing peer-to-peer file sharing websites (although it could block the content of the sites as it is downloaded). D: Malware inspection is the process of scanning a computer system for malware. Malware inspection does not prevent users accessing peer-to-peer file sharing websites.

Answer: C Explanation: URL filtering, also known as web filtering, is the act of blocking access to a site based on all or part of the URL used to request access. URL filtering can focus on all or part of a fully qualified domain name (FQDN), specific path names, specific filenames, specific fi le extensions, or entire specific URLs. Many URL-filtering tools can obtain updated master URL block lists from vendors as well as allow administrators to add or remove URLs from a custom list.

Answer: D Explanation: A URL filter is used to block access to a site based on all or part of a URL. There are a number of URL-filtering tools that can acquire updated master URL block lists from vendors, as well as allow administrators to add or remove URLs from a custom list.

Answer: B Explanation: A content filter is a is a type of software designed to restrict or control the content a reader is authorised to access, particularly when used to limit material delivered over the Internet via the Web, e-mail, or other means. Because the user and the OSI layer interact directly with the content filter, it operates at Layer 7 of the OSI model.

Answer: A Explanation: Web filtering software is designed to restrict or control the content a reader is authorised to access, especially when utilised to restrict material delivered over the Internet via the Web, e-mail, or other means.

Answer: C Explanation: An all-in-one appliance, also known as Unified Threat Management (UTM) and Next Generation Firewall (NGFW), is one that provides a good foundation for security. A variety is available; those that you should be familiar with for the exam fall under the categories of providing URL filtering, content inspection, or malware inspection. Malware inspection is the use of a malware scanner to detect unwanted software content in network traffic. If malware is detected, it can be blocked or logged and/or trigger an alert.

Answer: A Explanation: A web application firewall (WAF) is an appliance, server plugin, or filter that applies a set of rules to an HTTP conversation. Generally, these rules cover common attacks such as cross-site scripting (XSS) and SQL injection. By customizing the rules to your application, many attacks can be identified and blocked. The effort to perform this customization can be significant and needs to be maintained as the application is modified. As the protocols used to access a web server (typically HTTP and HTTPS) run in layer 7 of the OSI model, then web application firewall (WAF) is the correct answer.

Answer: D,E,G Explanation: A proxy server is a server that acts as an intermediary for requests from clients seeking resources from other servers. Firewalls manage traffic using a rule or a set of rules. A URL is a reference to a resource that specifies the location of the resource. A URL filter is used to block access to a site based on all or part of a URL.

Answer: B Explanation: A web application firewall is a device, server add-on, virtual service, or system filter that defines a strict set of communication rules for a website and all visitors. It's intended to be an applicationspecific firewall to prevent cross-site scripting, SQL injection, and other web application attacks.

Answer: C Explanation: The main functions of intrusion prevention systems are to identify malicious activity, log information about this activity, attempt to block/stop it, and report it

Answer: B Explanation: An intrusion detection system (IDS) is a device or software application that monitors network or system activities for malicious activities or policy violations and produces reports to a management station. IDS come in a variety of "flavors" and approach the goal of detecting suspicious traffic in different ways. There are network based (NIDS) and host based (HIDS) intrusion detection systems. Some systems may attempt to stop an intrusion attempt but this is neither required nor expected of a monitoring system. Intrusion detection and prevention systems (IDPS) are primarily focused on identifying possible incidents, logging information about them, and reporting attempts. In addition, organizations use IDPSes for other purposes, such as identifying problems with security policies, documenting existing threats and deterring individuals from violating security policies. IDPSes have become a necessary addition to the security infrastructure of nearly every organization. IDPSes typically record information related to observed events, notify security administrators of important observed events and produce reports. Many IDPSes can also respond to a detected threat by attempting to prevent it from succeeding. They use several response techniques, which involve the IDPS stopping the attack itself, changing the security environment (e.g. reconfiguring a firewall) or changing the attack's content.

Explanation: Firewall rules act like ACLs, and they are used to dictate what traffic can pass between the firewall and the internal network. Three possible actions can be taken based on the rule's criteria: Block the connection Allow the connection Allow the connection only if it is secured TCP is responsible for providing a reliable, one-to-one, connection-oriented session. TCP establishes a connection and ensures that the other end receives any packets sent. Two hosts communicate packet results with each other. TCP also ensures that packets are decoded and sequenced properly. This connection is persistent during the session. When the session ends, the connection is torn down. UDP provides an unreliable connectionless communication method between hosts. UDP is considered a best-effort protocol, but it's considerably faster than TCP. The sessions don't establish a synchronized session like the kind used in TCP, and UDP doesn't guarantee error-free communications. The primary purpose of UDP is to send small packets of information. The application is responsible for acknowledging the correct reception of the data. Port 22 is used by both SSH and SCP with UDP. Port 443 is used for secure web connections - HTTPS and is a TCP port. Thus to make sure only the Accounting computer has HTTPS access to the Administrative server you should use TCP port 443 and set the rule to allow communication between 10.4.255.10/24 (Accounting) and 10.4.255.101 (Administrative server1) Thus to make sure that only the HR computer has access to Server2 over SCP you need use of TCP port 22 and set the rule to allow communication between 10.4.255.10/23 (HR) and 10.4.255.2 (server2) Thus to make sure that the IT computer can access both the Administrative servers you need to use a port and accompanying port number and set the rule to allow communication between: 10.4.255.10.25 (IT computer) and 10.4.255.101 (Administrative server1) 10.4.255.10.25 (IT computer) and 10.4.255.102 (Administrative server2)

Instructions: The firewall will process the rules in a top-down manner in order as a first match The port number must be typed in and only one port number can be entered per rule Type ANY for all ports. The original firewall configuration can be reset at any time by pressing the reset button. Once you have met the simulation requirements, click save and then Done to submit. Implicit deny is the default security stance that says if you aren't specifically granted access or privileges for a resource, you're denied access by default. Rule #1 allows the Accounting workstation to ONLY access the web server on the public network over the default HTTPS port, which is TCP port 443. Rule #2 allows the HR workstation to ONLY communicate with the Financial server over the default SCP port, which is TCP Port 22 Rule #3 & Rule #4 allow the Admin workstation to ONLY access the Financial and Purchasing servers located on the secure network over the default TFTP port, which is Port 69.

Answer: C Explanation: DNS operates over TCP and UDP port 53. TCP port 53 is used for zone transfers.

Answer: D Explanation: Trivial File Transfer Protocol (TFTP) is a simple file-exchange protocol that doesn't require authentication. It operates on UDP port 69.

Answer: D Explanation: Firewall rules are used to define what traffic is able pass between the firewall and the internal network. Firewall rules block the connection, allow the connection, or allow the connection only if it is secured. Firewall rules can be applied to inbound traffic or outbound traffic and any type of network.

Answer: C Explanation: A virtual local area network (VLAN) is a hardware-imposed network segmentation created by switches. VLANs are used for traffic management. VLANs can be used to isolate traffic between network segments.

Answer: B Explanation: A subinterface is a division of one physical interface into multiple logical interfaces. Routers commonly employ subinterfaces for a variety of purposes, most common of these are for routing traffic between VLANs. Also, IEEE 802.1Q is the networking standard that supports virtual LANs (VLANs) on an Ethernet network.

Answer: A Explanation: VLANs are used for traffic management. VLANs can be used to isolate traffic between network segments. This can be accomplished by not defining a route between different VLANs or by specifying a deny filter between certain VLANs (or certain members of a VLAN). Any network segment that doesn't need to communicate with another in order to accomplish a work task/function shouldn't be able to do so.

Answer: D Explanation: In the OSI model, IP addressing and IP routing are performed at layer 3 (the network layer). In this question we need to configure routing. When configuring routing, you specify which IP range (in this case, the IP subnet of the remote site) is allowed to route traffic through the router to the FTP server. Traffic that comes into the router is compared to ACL entries based on the order that the entries occur in the router. New statements are added to the end of the list. The router continues to look until it has a match. If no matches are found when the router reaches the end of the list, the traffic is denied. For this reason, you should have the frequently hit entries at the top of the list. There is an implied deny for traffic that is not permitted.

Answer: A,F Explanation: A virtual local area network (VLAN) is a hardware-imposed network segmentation created by switches. A virtual switch is a software application that allows communication between virtual machines. A combination of the two would best satisfy the question.

Answer: C Explanation: Traffic that comes into the router is compared to ACL entries based on the order that the entries occur in the router. New statements are added to the end of the list. The router continues to look until it has a match. If no matches are found when the router reaches the end of the list, the traffic is denied. For this reason, you should have the frequently hit entries at the top of the list. There is an implied deny for traffic that is not permitted.

Answer: D Explanation: Port security in IT can mean several things: The physical control of all connection points, such as RJ-45 wall jacks or device ports, so that no unauthorized users or unauthorized devices can attempt to connect into an open port. The management of TCP and User Datagram Protocol (UDP) ports. If a service is active and assigned to a port, then that port is open. All the other 65,535 ports (of TCP or UDP) are closed if a service isn't actively using them. Port knocking is a security system in which all ports on a system appear closed. However, if the client sends packets to a specific set of ports in a certain order, a bit like a secret knock, then the desired service port becomes open and allows the client software to connect to the service.

Answer: C Explanation: Port security in IT can mean several things. It can mean the physical control of all connection points, such as RJ-45 wall jacks or device ports, so that no unauthorized users or unauthorized devices can attempt to connect into an open port. This can be accomplished by locking down the wiring closet and server vaults and then disconnecting the workstation run from the patch panel (or punch-down block) that leads to a room's wall jack. Any unneeded or unused wall jacks can (and should) be physically disabled in this manner. Another option is to use a smart patch panel that can monitor the MAC address of any device connected to each and every wall port across a building and detect not just when a new device is connected to an empty port, but also when a valid device is disconnected or replaced by an invalid device.

Answer: D Explanation: The question states that the network uses 802.1x with PEAP. The 802.1x authentication server is typically an EAP-compliant Remote Access Dial-In User Service (RADIUS). A RADIUS server will be configured with a digital certificate. When a digital certificate is created, an expiration period is configured by the Certificate Authority (CA). The expiration period is commonly one or two years. The question states that no configuration changes have been made so it's likely that the certificate has expired.

Answer: D Explanation: IEEE 802.1x is an IEEE Standard for Port-based Network Access Control (PNAC). It is part of the IEEE 802.1 group of networking protocols and provides an authentication mechanism to wireless devices connecting to a LAN or WLAN.

Answer: D Explanation: 802.1x is a port-based authentication mechanism. It's based on Extensible Authentication Protocol (EAP) and is commonly used in closed-environment wireless networks. 802.1x was initially used to compensate for the weaknesses of Wired Equivalent Privacy (WEP), but today it's often used as a component in more complex authentication and connection-management systems, including Remote Authentication Dial-In User Service (RADIUS), Diameter, Cisco System's Terminal Access Controller Access-Control System Plus (TACACS+), and Network Access Control (NAC).

Answer: A,F Explanation: Implicit deny is the default security stance that says if you aren't specifically granted access or privileges for a resource, you're denied access by default. Implicit deny is the default response when an explicit allow or deny isn't present. DNS operates over TCP and UDP port 53. TCP port 53 is used for zone transfers. These are zone file exchanges between DNS servers, special manual queries, or used when a response exceeds 512 bytes. UDP port 53 is used for most typical DNS queries.

Answer: D Explanation: Implicit deny is the default security stance that says if you aren't specifically granted access or privileges for a resource, you're denied access by default. Implicit deny is the default response when an explicit allow or deny isn't present.

Answer: B Explanation: Implicit deny is the default security stance that says if you aren't specifically granted access or privileges for a resource, you're denied access by default.

Answer: D Explanation: 802.1x is a port-based authentication mechanism. It's based on Extensible Authentication Protocol (EAP) and is commonly used in closed-environment wireless networks. 802.1x was initially used to compensate for the weaknesses of Wired Equivalent Privacy (WEP), but today it's often used as a component in more complex authentication and connection-management systems, including Remote Authentication Dial-In User Service (RADIUS), Diameter, Cisco System's Terminal Access Controller Access-Control System Plus (TACACS+), and Network Access Control (NAC). A virtual local area network (VLAN) is a hardware-imposed network segmentation created by switches. By default, all ports on a switch are part of VLAN 1. But as the switch administrator changes the VLAN assignment on a port-by-port basis, various ports can be grouped together and be distinct from other VLAN port designations. VLANs are used for traffic management. Communications between ports within the same VLAN occur without hindrance, but communications between VLANs require a routing function.

Answer: C Explanation: A Hyper-V Virtual Switch implements policy enforcement for security, isolation, and service levels.

Answer: B Explanation: Monitoring-as-a-service (MaaS) is a cloud delivery model that falls under anything as a service (XaaS). MaaS allows for the deployment of monitoring functionalities for several other services and applications within the cloud.

Answer: D Explanation: Log analysis is the art and science of reviewing audit trails, log files, or other forms of computergenerated records for evidence of policy violations, malicious events, downtimes, bottlenecks, or other issues of concern. SSH uses TCP port 22. All protocols encrypted by SSH also use TCP port 22, such as SFTP, SHTTP, SCP, SExec, and slogin.

Answer: A Explanation: When you combine a firewall with other abilities (intrusion prevention, antivirus, content filtering, etc.), what used to be called an all-in-one appliance is now known as a unified threat management (UTM) system. The advantages of combining everything into one include a reduced learning curve (you only have one product to learn), a single vendor to deal with, and—typically—reduced complexity.

Answer: A Explanation: Unified Threat Management (UTM) is, basically, the combination of a firewall with other abilities. These abilities include intrusion prevention, antivirus, content filtering, etc. Advantages of combining everything into one: You only have one product to learn. You only have to deal with a single vendor. IT provides reduced complexity.

Answer: D Explanation: A DMZ or demilitarized zone (sometimes referred to as a perimeter network) is a physical or logical subnetwork that contains and exposes an organization's external-facing services to a larger and untrusted network, usually the Internet. The purpose of a DMZ is to add an additional layer of security to an organization's local area network (LAN); an external network node only has direct access to equipment in the DMZ, rather than any other part of the network. The name is derived from the term "demilitarized zone", an area between nation states in which military operation is not permitted.

Answer: A Explanation: The DMZ is a buffer network between the public untrusted Internet and the private trusted LAN. Often a DMZ is deployed through the use of a multihomed firewall.

Answer: A Explanation: A demilitarized zone (DMZ) is an area of a network that is designed specifically for public users to access. The DMZ is a buffer network between the public untrusted Internet and the private trusted LAN. Often a DMZ is deployed through the use of a multihomed firewall.

Answer: C Explanation: A demilitarized zone (DMZ) is an area of a network that is designed specifically for public users to access. The DMZ is a buffer network between the public untrusted Internet and the private trusted LAN. Often a DMZ is deployed through the use of a multihomed firewall. CompTIA SY0-401 Exam

Answer: A Explanation: A demilitarized zone (DMZ) is an area of a network that is designed specifically for public users to access. The DMZ is a buffer network between the public untrusted Internet and the private trusted LAN. Often a DMZ is deployed through the use of a multihomed firewall.

Answer: A Explanation: A demilitarized zone (DMZ) is an area of a network that is designed specifically for public users to access. The DMZ is a buffer network between the public untrusted Internet and the private trusted LAN. Often a DMZ is deployed through the use of a multihomed firewall.

Answer: D Explanation: Subnetting is a dividing process used on networks to divide larger groups of hosts into smaller collections.

Answer: C,D Explanation: With the given subnet mask, a maximum number of 30 hosts between IP addresses 10.4.4.161 and 10.4.4.190 are allowed. Therefore, option C and D would be hosts on the same subnet, and the other options would not.

Answer: D Explanation: Using this option will result in all three servers using host addresses on different broadcast domains.

Answer: D Explanation: Subnetting is a dividing process used on networks to divide larger groups of hosts into smaller collections.

Answer: E,F Explanation: We can protect the servers from the user devices by separating them into separate VLANs (virtual local area networks). The network device in the question is a router/switch. We can use the router to allow access from devices in one VLAN to the servers in the other VLAN. We can configure an ACL (Access Control List) on the router to determine who is able to access the server. In computer networking, a single layer-2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them via one or more routers; such a domain is referred to as a virtual local area network, virtual LAN or VLAN. This is usually achieved on switch or router devices. Simpler devices only support partitioning on a port level (if at all), so sharing VLANs across devices requires running dedicated cabling for each VLAN. More sophisticated devices can mark packets through tagging, so that a single interconnect (trunk) may be used to transport data for multiple VLANs. Grouping hosts with a common set of requirements regardless of their physical location by VLAN can greatly simplify network design. A VLAN has the same attributes as a physical local area network (LAN), but it allows for end stations to be grouped together more easily even if they are not on the same network switch. The network described in this question is a DMZ, not a VLAN.

Answer: B Explanation: A virtual local area network (VLAN) is a hardware-imposed network segmentation created by switches. VLANs are used for traffic management. Communications between ports within the same VLAN occur without hindrance, but communications between VLANs require a routing function.

Answer: B Explanation: It is a common and recommended practice to separate voice and data traffic by using VLANs. Separating voice and data traffic using VLANs provides a solid security boundary, preventing data applications from reaching the voice traffic. It also gives you a simpler method to deploy QoS, prioritizing the voice traffic over the data. "

Answer: A Explanation: A virtual local area network (VLAN) is a hardware-imposed network segmentation created by switches. VLANs are used for traffic management. Communications between ports within the same VLAN occur without hindrance, but communications between VLANs require a routing function.

Answer: C Explanation: A virtual local area network (VLAN) is a hardware-imposed network segmentation created by switches. VLANs are used for traffic management. Communications between ports within the same VLAN occur without hindrance, but communications between VLANs require a routing function.

Answer: B Explanation: A virtual local area network (VLAN) is a hardware-imposed network segmentation created by switches. VLANs are used for traffic management. Communications between ports within the same VLAN occur without hindrance, but communications between VLANs require a routing function.

Answer: D Explanation: A virtual local area network (VLAN) is a hardware-imposed network segmentation created by switches.

Answer: D Explanation: Network address translation (NAT) allows you to share a connection to the public Internet via a single interface with a single public IP address. NAT maps the private addresses to the public address. In a typical configuration, a local network uses one of the designated "private" IP address subnets. A router on that network has a private address (192.168.1.1) in that address space, and is also connected to the Internet with a "public" address (10.2.2.1) assigned by an Internet service provider.

Answer: D Explanation: NAT serves as a basic firewall by only allowing incoming traffic that is in response to an internal system's request.

Answer: C Explanation: RDP uses TCP port 3389.

Answer: A Explanation: Remote Procedure Call (RPC) is a programming interface that allows a remote computer to run programs on a local machine.

Answer: B Explanation: VPNs are usually employed to allow remote access users to connect to and access the network, and offer connectivity between two or more private networks or LANs. A VPN gateway (VPN router) is a connection point that connects two LANs via a nonsecure network such as the Internet.

Answer: C Explanation: Quality of Service (QoS) facilitates the deployment of media-rich applications, such as video conferencing and Internet Protocol (IP) telephony, without adversely affecting network throughput.

Answer: C Explanation: Network Access Control (NAC) means controlling access to an environment through strict adherence to and implementation of security policies. The goals of NAC are to prevent/reduce zero-day attacks, enforce security policy throughout the network, and use identities to perform access control.

Answer: C Explanation: Network Access Control (NAC) means controlling access to an environment through strict adherence to and implementation of security policies. The goals of NAC are to prevent/reduce zero-day attacks, enforce security policy throughout the network, and use identities to perform access control.

Answer: C Explanation: Virtualization allows a single set of hardware to host multiple virtual machines.

Answer: A Explanation: Virtualization allows a single set of hardware to host multiple virtual machines.

Answer: B Explanation: Migrating to a virtual server environment reduces cost by eliminating the need to purchase, manage, maintain and power physical machines. The fewer physical machines you have, the less money it costs.

Answer: A Explanation: Because Virtualization allows a single set of hardware to host multiple virtual machines, it requires less hardware to maintain the current scenario.

Answer: D Explanation: Virtualization allows a single set of hardware to host multiple virtual machines.

Answer: D Explanation: Cloud computing refers to performing data processing and storage elsewhere, over a network connection, rather than locally. Because users have access to the data, it can easily be copied to a USB device.

Answer: A Explanation: Software as a Service (SaaS) allows for on-demand online access to specific software applications or suites without having to install it locally. This will allow the data center to continue providing network and security services.

Answer: A Explanation: Software as a Service (SaaS) is a software distribution model in which applications are hosted by a vendor or service provider and made available to customers over a network, typically the Internet.

Answer: A Explanation: Cloud users install operating-system images and their application software on the cloud infrastructure to deploy their applications. In this model, the cloud user patches and maintains the operating systems and the application software.

Answer: D Explanation: Cloud users install operating-system images and their application software on the cloud infrastructure to deploy their applications. In this model, the cloud user patches and maintains the operating systems and the application software.

Answer: D Explanation: One of the ways cloud computing is able to obtain cost efficiencies is by putting data from various clients on the same machines. This "multitenant" nature means that workloads from different clients can be on the same system, and a flaw in implementation could compromise security.

Answer: C Explanation: One of the ways cloud computing is able to obtain cost efficiencies is by putting data from various clients on the same machines. This "multitenant" nature means that workloads from different clients can be on the same system, and a flaw in implementation could compromise security.

Answer: D Explanation: An application-level gateway firewall filters traffic based on user access, group membership, the application or service used, or even the type of resources being transmitted. This type of firewall operates at the Application layer (Layer 7) of the OSI model.

Answer: C Explanation: Layered security is the practice of combining multiple mitigating security controls to protect resources and data.

Answer: A Explanation: Layer 2 Tunneling Protocol (L2TP) came about through a partnership between Cisco and Microsoft with the intention of providing a more secure VPN protocol. L2TP is considered to be a more secure option than PPTP, as the IPSec protocol which holds more secure encryption algorithms, is utilized in conjunction with it. It also requires a pre-shared certificate or key. L2TP's strongest level of encryption makes use of 168 bit keys, 3 DES encryption algorithm and requires two levels of authentication. L2TP has a number of advantages in comparison to PPTP in terms of providing data integrity and authentication of origin verification designed to keep hackers from compromising the system. However, the increased overhead required to manage this elevated security means that it performs at a slower pace than PPTP.

Answer: A Explanation: IPSec can operate in tunnel mode or transport mode. It uses symmetric cryptography to provide encryption security. Furthermore, it makes use of Internet Security Association and Key Management Protocol (ISAKMP).

Answer: A,C Explanation: Telnet supports IPv6 connections. IPv6 is the communications protocol that provides an identification and location system for computers on networks and routes traffic across the Internet. IPsec is a protocol suite for securing Internet Protocol (IP) communications by authenticating and encrypting each IP packet of a communication session. IPsec is a compulsory component for IPv6. IPsec operates at Layer 3 of the OSI model, whereas Telnet operates at Layer 7.

Answer: B Explanation: Currently, SNMP is predominantly used for monitoring and performance management. SNMPv3 defines a secure version of SNMP and also facilitates remote configuration of the SNMP entities.

Answer: B Explanation: Currently, SNMP is predominantly used for monitoring and performance management. SNMPv3 defines a secure version of SNMP and also facilitates remote configuration of the SNMP entities.

Answer: B Explanation: SSH transmits both authentication traffic and data in a secured encrypted form, whereas Telnet transmits both authentication credentials and data in clear text.

Answer: D Explanation: SSH transmits both authentication traffic and data in a secured encrypted form, whereas Telnet transmits both authentication credentials and data in clear text.

Answer: B Explanation: Secure Shell (SSH) is a tunneling protocol originally used on Unix systems. It's now available for both Unix and Windows environments. SSH is primarily intended for interactive terminal sessions. SSH is used to establish a command-line, text-only interface connection with a server, router, switch, or similar device over any distance.