3-Chlorophenol C6H5ClO structure – Flashcards

Flashcard maker : Isabella Parker

C6H5ClO structure
Molecular Formula C6H5ClO
Average mass 128.556 Da
Density 1.3±0.1 g/cm3
Boiling Point 214.0±0.0 °C at 760 mmHg
Flash Point 76.9±19.8 °C
Molar Refractivity 33.0±0.3 cm3
Polarizability 13.1±0.5 10-24cm3
Surface Tension 44.7±3.0 dyne/cm
Molar Volume 99.8±3.0 cm3
  • Experimental data
  • Predicted – ACD/Labs
  • Predicted – EPISuite
  • Predicted – ChemAxon
  • Predicted – Mcule
  • Experimental Physico-chemical Properties
    • Experimental Melting Point:

      30-34 °C Alfa Aesar
      33 °C Oxford University Chemical Safety Data (No longer updated) More details
      28-35 °C Merck Millipore 3092, 820321
      34 °C Jean-Claude Bradley Open Melting Point Dataset 13643
      33 °C Jean-Claude Bradley Open Melting Point Dataset 15373
      32.6 °C Jean-Claude Bradley Open Melting Point Dataset 16725
      33.5 °C Jean-Claude Bradley Open Melting Point Dataset 26654
      32.5 °C Jean-Claude Bradley Open Melting Point Dataset 27605
      32 °C Jean-Claude Bradley Open Melting Point Dataset 3848
      30-34 °C Alfa Aesar A13671
      30-34 °C SynQuest 71638, 2601-5-01
      33-35 °C Oakwood 121000
      33-35 °C LabNetwork LN00194307
    • Experimental Boiling Point:

      214 °C Alfa Aesar
      214 °C Oxford University Chemical Safety Data (No longer updated) More details
      214 °C Alfa Aesar A13671
      214 °C SynQuest 71638, 2601-5-01
      214 °C Oakwood 121000
      214 °C LabNetwork LN00194307
    • Experimental Flash Point:

      33 °C TCI C0242
      120 °C Alfa Aesar
      120 °C Alfa Aesar
      120 °F (48.8889 °C)
      Alfa Aesar A13671
      120 °C SynQuest 71638, 2601-5-01
      120 °C Oakwood 121000
      120 °C LabNetwork LN00194307
    • Experimental Gravity:

      1.245 g/mL Alfa Aesar A13671
      1.245 g/mL SynQuest 2601-5-01
      1.218 g/mL Oakwood 121000
    • Experimental Refraction Index:

      1.563 Alfa Aesar A13671
      1.563 SynQuest 71638, 2601-5-01
  • Predicted Physico-chemical Properties
    • Predicted Melting Point:

      33-35 °C J&K Scientific 272603
  • Miscellaneous
    • Appearance:

      Not Available Novochemy
      [NC-30613]
      white crystalline solid with an unpleasant smell Oxford University Chemical Safety Data (No longer updated) More details
    • Stability:

      Stable. Combustible. Incompatible with acid chlorides,oxidizing agents, acid anhydrides. Discolours in air. Oxford University Chemical Safety Data (No longer updated) More details
    • Toxicity:

      ORL-RAT LD50 570 mg kg-1, IPR-RAT LD50 355 mg kg-1, SCU-RAT LD50 1390 mg kg-1, ORL-MUS LD50 521 mg kg-1 Oxford University Chemical Safety Data (No longer updated) More details
    • Safety:

      20/21/22 Novochemy
      [NC-30613]
      20/21/22-51/53 Alfa Aesar A13671
      20/21/36/37/39 Novochemy
      [NC-30613]
      28-61 Alfa Aesar A13671
      6.1 Alfa Aesar A13671
      DANGER: POISON, irritates skin, eyes, lungs Alfa Aesar A13671
      GHS07; GHS09 Biosynth W-108718
      GHS07; GHS09 Novochemy
      [NC-30613]
      H302; H312; H332; H411 Biosynth W-108718
      H302-H312-H332-H411 Alfa Aesar A13671
      H332; H403 Novochemy
      [NC-30613]
      IRRITANT Matrix Scientific 095373
      P273; P280 Biosynth W-108718
      P273-P302+P352 Alfa Aesar A13671
      P332+P313; P305+P351+P338 Novochemy
      [NC-30613]
      R52/53 Novochemy
      [NC-30613]
      Safety glasses, adequate ventilation. Oxford University Chemical Safety Data (No longer updated) More details
      Toxic/Harmful/Stench/Air Sensitive/Store under Argon SynQuest 2601-5-01, 71638
      Warning Alfa Aesar A13671
      Warning Biosynth W-108718
      Warning Novochemy
      [NC-30613]
  • Gas Chromatography
    • Retention Index (Kovats):

      1081 (estimated with error: 89) NIST Spectra mainlib_2761, replib_228141, replib_333377, replib_20703
      1157 (Program type: Isothermal; Col… (show more) umn class: Standard non-polar; Column diameter: 0.32 mm; Column length: 25 m; Column type: Capillary; Start T: 160 C; CAS no: 108430; Active phase: SE-30; Data type: Kovats RI; Authors: Evans, M.B.; Haken, J.K., Dispersion and selectivity indices in gas chromatography. IV. Chlorinated aromatic compounds, J. Chromatogr., 468, 1989, 373-382., Program type: Isothermal; Col… (show more) umn class: Standard non-polar; Column type: Capillary; Start T: 160 C; CAS no: 108430; Active phase: SE-30; Data type: Kovats RI; Authors: Korhonen, I.O.O., Gas-liquid chromatographic analyses. XXXI. Retention increments of isomeric chlorophenols on low-polarity (SE-30) and polar (FFAP) capillary columns, J. Chromatogr., 315, 1984, 185-200.) NIST Spectra nist ri
      1159 (Program type: Isothermal; Col… (show more) umn class: Standard non-polar; Column type: Capillary; Start T: 140 C; CAS no: 108430; Active phase: SE-30; Data type: Kovats RI; Authors: Korhonen, I.O.O., Gas-liquid chromatographic analyses. XXXI. Retention increments of isomeric chlorophenols on low-polarity (SE-30) and polar (FFAP) capillary columns, J. Chromatogr., 315, 1984, 185-200.) NIST Spectra nist ri
      1161 (Program type: Isothermal; Col… (show more) umn class: Standard non-polar; Column type: Capillary; Start T: 180 C; CAS no: 108430; Active phase: SE-30; Data type: Kovats RI; Authors: Korhonen, I.O.O., Gas-liquid chromatographic analyses. XXXI. Retention increments of isomeric chlorophenols on low-polarity (SE-30) and polar (FFAP) capillary columns, J. Chromatogr., 315, 1984, 185-200.) NIST Spectra nist ri
      1194 (Program type: Ramp; Column cl… (show more) ass: Standard non-polar; Column length: 2.9 m; Column type: Packed; CAS no: 108430; Active phase: SE-30; Substrate: Chromosorb W HMDS (80-100 mesh); Data type: Kovats RI; Authors: Grzybowski, J.; Lamparczyk, H.; Nasal, A.; Radecki, A., Relationship between the retention indices of phenols on polar and non-polar stationary phases, J. Chromatogr., 196, 1980, 217-223.) NIST Spectra nist ri
      1189 (Program type: Isothermal; Col… (show more) umn class: Standard non-polar; Column type: Packed; Start T: 150 C; CAS no: 108430; Active phase: Methyl Silicone; Data type: Kovats RI; Authors: Radecki, A.; Grzybowski, J.; Lamparczyk, H.; Nasal, A., Relationships between retention indices and substituent constants of phenols on polar stationary phases, J. Hi. Res. Chromatogr. & Chromatogr. Comm., 2, 1979, 581-582.) NIST Spectra nist ri
      2371 (Program type: Isothermal; Col… (show more) umn class: Standard polar; Column diameter: 0.35 mm; Column length: 25 m; Column type: Capillary; Start T: 160 C; CAS no: 108430; Active phase: FFAP; Data type: Kovats RI; Authors: Evans, M.B.; Haken, J.K., Dispersion and selectivity indices in gas chromatography. IV. Chlorinated aromatic compounds, J. Chromatogr., 468, 1989, 373-382., Program type: Isothermal; Col… (show more) umn class: Standard polar; Column type: Capillary; Start T: 160 C; CAS no: 108430; Active phase: FFAP; Data type: Kovats RI; Authors: Korhonen, I.O.O., Gas-liquid chromatographic analyses. XXXI. Retention increments of isomeric chlorophenols on low-polarity (SE-30) and polar (FFAP) capillary columns, J. Chromatogr., 315, 1984, 185-200., Program type: Isothermal; Col… (show more) umn class: Standard polar; Column type: Capillary; Start T: 180 C; CAS no: 108430; Active phase: FFAP; Data type: Kovats RI; Authors: Korhonen, I.O.O., Gas-liquid chromatographic analyses. XXXI. Retention increments of isomeric chlorophenols on low-polarity (SE-30) and polar (FFAP) capillary columns, J. Chromatogr., 315, 1984, 185-200.) NIST Spectra nist ri
      2380 (Program type: Isothermal; Col… (show more) umn class: Standard polar; Column type: Capillary; Start T: 200 C; CAS no: 108430; Active phase: FFAP; Data type: Kovats RI; Authors: Korhonen, I.O.O., Gas-liquid chromatographic analyses. XXXI. Retention increments of isomeric chlorophenols on low-polarity (SE-30) and polar (FFAP) capillary columns, J. Chromatogr., 315, 1984, 185-200.) NIST Spectra nist ri
    • Retention Index (Normal Alkane):

      1159 (Program type: Ramp; Column cl… (show more) ass: Standard non-polar; Column type: Capillary; CAS no: 108430; Active phase: Methyl Silicone; Data type: Normal alkane RI; Authors: Yu, H.; Zazhi, J., Relationship between chromatogram retention index and toxicity of chlorinated phenols and chlorinated benzenes to Guppy, J. Enviropn. Health (Chinese), 22(6), 2005, 441-444.) NIST Spectra nist ri
      1194 (Program type: Ramp; Column cl… (show more) ass: Standard non-polar; Column type: Capillary; CAS no: 108430; Active phase: SE-30; Data type: Normal alkane RI; Authors: Peterson, K.L., Counter-Propagation Neural Networks in the Modeling and Prediction of Kovats Indices for Substituted Phenols, Anal. Chem., 64(4), 1992, 379-386.) NIST Spectra nist ri
      1170 (Program type: Ramp; Column cl… (show more) ass: Standard non-polar; Column diameter: 0.32 mm; Column length: 25 m; Column type: Capillary; Heat rate: 3 K/min; Start T: 80 C; End T: 260 C; CAS no: 108430; Active phase: Ultra-1; Carrier gas: He; Phase thickness: 0.25 um; Data type: Normal alkane RI; Authors: Okumura, T., retention indices of environmental chemicals on methyl silicone capillary column, Journal of Environmental Chemistry (Japan), 1(2), 1991, 333-358.) NIST Spectra nist ri
      1202.6 (Program type: Complex; Column… (show more) class: Semi-standard non-polar; Column diameter: 0.25 mm; Column length: 30 m; Column type: Capillary; Description: 40C(2min) =>3C/min =>175C (4min) => 3C/min => 240C => 7C/min=>320C(10min); CAS no: 108430; Active phase: HP-5MS; Carrier gas: He; Phase thickness: 0.25 um; Data type: Normal alkane RI; Authors: Lacorte, S.; Guiffard, I.; Fraisse, D.; Barcelo, D., Broad spectrum analysis of 109 priority compounds listed in the 76/464/CEE council directive using solid-phase extraction and GC/EI/MS, Anal. Chem., 72, 2000, 1430-1440.) NIST Spectra nist ri
      1200 (Program type: Complex; Column… (show more) class: Semi-standard non-polar; Column diameter: 0.20 mm; Column length: 25 m; Column type: Capillary; Description: 50 0C (2 min) ^ 30 0C/min -> 200 0C ^ 8 0C/min -> 280 0C (10 min); CAS no: 108430; Active phase: PTE-5; Phase thickness: 0.33 um; Data type: Normal alkane RI; Authors: Nakano, T.; Fujimori, K.; Takaishi, Y.; Okuno, T., GC/MS-SIM analysis of polychlorobenzenes, polychlorophenols and polychloronaphthalenes, Report of the Environmental Science Institute of Hyogo Prefecture, 24, 1992, 30-37.) NIST Spectra nist ri
      1203 (Program type: Complex; Column… (show more) class: Semi-standard non-polar; Column diameter: 0.20 mm; Column length: 25 m; Column type: Capillary; Description: 50 0C (2 min) ^ 30 0C/min -> 200 0C ^ 8 0C/min -> 280 0C (10 min); CAS no: 108430; Active phase: Ultra-2; Phase thickness: 0.33 um; Data type: Normal alkane RI; Authors: Nakano, T.; Fujimori, K.; Takaishi, Y.; Okuno, T., GC/MS-SIM analysis of polychlorobenzenes, polychlorophenols and polychloronaphthalenes, Report of the Environmental Science Institute of Hyogo Prefecture, 24, 1992, 30-37.) NIST Spectra nist ri
      1207 (Program type: Ramp; Column cl… (show more) ass: Semi-standard non-polar; Column diameter: 0.32 mm; Column length: 25 m; Column type: Capillary; Heat rate: 8 K/min; Start T: 50 C; End T: 250 C; End time: 12 min; Start time: 2 min; CAS no: 108430; Active phase: SE-54; Carrier gas: He; Data type: Normal alkane RI; Authors: Harland, B.J.; Cumming, R.I.; Gillings, E., The Kovats indexes of some organic micropollutants on an SE54 capillary column, EUR, I Org. Micropollut. Aquat. Environ., EUR 10388, 1986, 123-127.) NIST Spectra nist ri
    • Retention Index (Linear):

      1171 (Program type: Ramp; Column cl… (show more) ass: Standard non-polar; Column type: Capillary; Heat rate: 8 K/min; Start T: 35 C; End T: 300 C; CAS no: 108430; Active phase: OV-1; Data type: Linear RI; Authors: Gautzsch, R.; Zinn, P., Use of incremental models to estimate the retention indexes of aromatic compounds, Chromatographia, 43(3/4), 1996, 163-176.) NIST Spectra nist ri
      1165 (Program type: Ramp; Column cl… (show more) ass: Standard non-polar; Column type: Capillary; Heat rate: 2 K/min; Start T: 100 C; CAS no: 108430; Active phase: SE-30; Data type: Linear RI; Authors: Korhonen, I.O.O., Gas-liquid chromatographic analyses. XXXI. Retention increments of isomeric chlorophenols on low-polarity (SE-30) and polar (FFAP) capillary columns, J. Chromatogr., 315, 1984, 185-200.) NIST Spectra nist ri
      1167 (Program type: Ramp; Column cl… (show more) ass: Standard non-polar; Column type: Capillary; Heat rate: 6 K/min; Start T: 100 C; CAS no: 108430; Active phase: SE-30; Data type: Linear RI; Authors: Korhonen, I.O.O., Gas-liquid chromatographic analyses. XXXI. Retention increments of isomeric chlorophenols on low-polarity (SE-30) and polar (FFAP) capillary columns, J. Chromatogr., 315, 1984, 185-200.) NIST Spectra nist ri
      1169 (Program type: Ramp; Column cl… (show more) ass: Standard non-polar; Column type: Capillary; Heat rate: 10 K/min; Start T: 100 C; CAS no: 108430; Active phase: SE-30; Data type: Linear RI; Authors: Korhonen, I.O.O., Gas-liquid chromatographic analyses. XXXI. Retention increments of isomeric chlorophenols on low-polarity (SE-30) and polar (FFAP) capillary columns, J. Chromatogr., 315, 1984, 185-200.) NIST Spectra nist ri
      1203.3 (Program type: Complex; Column… (show more) class: Semi-standard non-polar; Column diameter: 0.25 mm; Column length: 30 m; Column type: Capillary; Description: Multi-step temperature program; T(initial)=60C; T(final)=270C; CAS no: 108430; Active phase: VF-5MS; Carrier gas: He; Phase thickness: 0.25 um; Data type: Linear RI; Authors: Tret’yakov, K.V., Retention Data. NIST Mass Spectrometry Data Center., 2007.) NIST Spectra nist ri
      1198 (Program type: Complex; Column… (show more) class: Semi-standard non-polar; Column diameter: 0.31 mm; Column length: 25 m; Column type: Capillary; Description: 50C(2min)=;(20C/min)=;120C=;(7C/min)=;310C(10min); CAS no: 108430; Active phase: 5 % Phenyl methyl siloxane; Carrier gas: He; Phase thickness: 0.52 um; Data type: Linear RI; Authors: Yasuhara, A.; Shiraishi, H.; Nishikawa, M.; Yamamoto, T.; Uehiro, T.; Nakasugi, O.; Okumura, T.; Kenmotsu, K.; Fukui, H.; Nagase, M.; Ono, Y.; Kawagoshi, Y.; Baba, K.; Noma, Y., Determination of organic components in leachates from hazardous waste disposal sites in Japan by gas chromatography-mass spectrometry, J. Chromatogr. A, 774, 1997, 321-332.) NIST Spectra nist ri
      2333 (Program type: Ramp; Column cl… (show more) ass: Standard polar; Column type: Capillary; Heat rate: 2 K/min; Start T: 100 C; CAS no: 108430; Active phase: FFAP; Data type: Linear RI; Authors: Korhonen, I.O.O., Gas-liquid chromatographic analyses. XXXI. Retention increments of isomeric chlorophenols on low-polarity (SE-30) and polar (FFAP) capillary columns, J. Chromatogr., 315, 1984, 185-200.) NIST Spectra nist ri
      2350 (Program type: Ramp; Column cl… (show more) ass: Standard polar; Column type: Capillary; Heat rate: 6 K/min; Start T: 100 C; CAS no: 108430; Active phase: FFAP; Data type: Linear RI; Authors: Korhonen, I.O.O., Gas-liquid chromatographic analyses. XXXI. Retention increments of isomeric chlorophenols on low-polarity (SE-30) and polar (FFAP) capillary columns, J. Chromatogr., 315, 1984, 185-200.) NIST Spectra nist ri
      2364 (Program type: Ramp; Column cl… (show more) ass: Standard polar; Column type: Capillary; Heat rate: 10 K/min; Start T: 100 C; CAS no: 108430; Active phase: FFAP; Data type: Linear RI; Authors: Korhonen, I.O.O., Gas-liquid chromatographic analyses. XXXI. Retention increments of isomeric chlorophenols on low-polarity (SE-30) and polar (FFAP) capillary columns, J. Chromatogr., 315, 1984, 185-200.) NIST Spectra nist ri

Predicted data is generated using the ACD/Labs Percepta Platform – PhysChem Module

Density: 1.3±0.1 g/cm3
Boiling Point: 214.0±0.0 °C at 760 mmHg
Vapour Pressure: 0.1±0.4 mmHg at 25°C
Enthalpy of Vaporization: 46.9±3.0 kJ/mol
Flash Point: 76.9±19.8 °C
Index of Refraction: 1.576
Molar Refractivity: 33.0±0.3 cm3
#H bond acceptors: 1
#H bond donors: 1
#Freely Rotating Bonds: 0
#Rule of 5 Violations: 0
ACD/LogP: 2.40
ACD/LogD (pH 5.5): 2.49
ACD/BCF (pH 5.5): 46.10
ACD/KOC (pH 5.5): 540.08
ACD/LogD (pH 7.4): 2.48
ACD/BCF (pH 7.4): 44.98
ACD/KOC (pH 7.4): 526.98
Polar Surface Area: 20 Å2
Polarizability: 13.1±0.5 10-24cm3
Surface Tension: 44.7±3.0 dyne/cm
Molar Volume: 99.8±3.0 cm3

Predicted data is generated using the US Environmental Protection Agency’s EPISuite™

 
 Log Octanol-Water Partition Coef (SRC):
 Log Kow (KOWWIN v1.67 estimate) = 2.16
 Log Kow (Exper. database match) = 2.50
 Exper. Ref: Hansch,C et al. (1995)

 Boiling Pt, Melting Pt, Vapor Pressure Estimations (MPBPWIN v1.42):
 Boiling Pt (deg C): 203.06 (Adapted Stein & Brown method)
 Melting Pt (deg C): 28.59 (Mean or Weighted MP)
 VP(mm Hg,25 deg C): 0.0688 (Modified Grain method)
 MP (exp database): 32.6 deg C
 BP (exp database): 214 deg C
 VP (exp database): 1.25E-01 mm Hg at 25 deg C
 Subcooled liquid VP: 0.149 mm Hg (25 deg C, exp database VP )

 Water Solubility Estimate from Log Kow (WSKOW v1.41):
 Water Solubility at 25 deg C (mg/L): 2595
 log Kow used: 2.50 (expkow database)
 no-melting pt equation used
 Water Sol (Exper. database match) = 2.6e+004 mg/L (20 deg C)
 Exper. Ref: VERSCHUEREN,K (1977) @2ND

 Water Sol Estimate from Fragments:
 Wat Sol (v1.01 est) = 12734 mg/L
 Wat Sol (Exper. database match) = 26000.00
 Exper. Ref: VERSCHUEREN,K (1977) @2ND

 ECOSAR Class Program (ECOSAR v0.99h):
 Class(es) found:
 Phenols

 Henrys Law Constant (25 deg C) [HENRYWIN v3.10]:
 Bond Method : 4.15E-007 atm-m3/mole
 Group Method: 5.60E-007 atm-m3/mole
 Exper Database: 3.45E-07 atm-m3/mole
 Henrys LC [VP/WSol estimate using EPI values]: 4.485E-006 atm-m3/mole

 Log Octanol-Air Partition Coefficient (25 deg C) [KOAWIN v1.10]:
 Log Kow used: 2.50 (exp database)
 Log Kaw used: -4.851 (exp database)
 Log Koa (KOAWIN v1.10 estimate): 7.351
 Log Koa (experimental database): None

 Probability of Rapid Biodegradation (BIOWIN v4.10):
 Biowin1 (Linear Model) : 0.6197
 Biowin2 (Non-Linear Model) : 0.5191
 Expert Survey Biodegradation Results:
 Biowin3 (Ultimate Survey Model): 2.7649 (weeks )
 Biowin4 (Primary Survey Model) : 3.5366 (days-weeks )
 MITI Biodegradation Probability:
 Biowin5 (MITI Linear Model) : 0.4329
 Biowin6 (MITI Non-Linear Model): 0.3927
 Anaerobic Biodegradation Probability:
 Biowin7 (Anaerobic Linear Model): 0.1328
 Ready Biodegradability Prediction: NO

Hydrocarbon Biodegradation (BioHCwin v1.01):
 Structure incompatible with current estimation method!

 Sorption to aerosols (25 Dec C)[AEROWIN v1.00]:
 Vapor pressure (liquid/subcooled): 19.9 Pa (0.149 mm Hg)
 Log Koa (Koawin est ): 7.351
 Kp (particle/gas partition coef. (m3/ug)):
 Mackay model : 1.51E-007 
 Octanol/air (Koa) model: 5.51E-006 
 Fraction sorbed to airborne particulates (phi):
 Junge-Pankow model : 5.45E-006 
 Mackay model : 1.21E-005 
 Octanol/air (Koa) model: 0.00044 

 Atmospheric Oxidation (25 deg C) [AopWin v1.92]:
 Hydroxyl Radicals Reaction:
 OVERALL OH Rate Constant = 23.5844 E-12 cm3/molecule-sec
 Half-Life = 0.454 Days (12-hr day; 1.5E6 OH/cm3)
 Half-Life = 5.442 Hrs
 Ozone Reaction:
 No Ozone Reaction Estimation
 Reaction With Nitrate Radicals May Be Important!
 Fraction sorbed to airborne particulates (phi): 8.77E-006 (Junge,Mackay)
 Note: the sorbed fraction may be resistant to atmospheric oxidation

 Soil Adsorption Coefficient (PCKOCWIN v1.66):
 Koc : 434
 Log Koc: 2.638 

 Aqueous Base/Acid-Catalyzed Hydrolysis (25 deg C) [HYDROWIN v1.67]:
 Rate constants can NOT be estimated for this structure!

 Bioaccumulation Estimates from Log Kow (BCFWIN v2.17):
 Log BCF from regression-based method = 1.225 (BCF = 16.79)
 log Kow used: 2.50 (expkow database)

 Volatilization from Water:
 Henry LC: 3.45E-007 atm-m3/mole (Henry experimental database)
 Half-Life from Model River: 1925 hours (80.22 days)
 Half-Life from Model Lake : 2.11E+004 hours (879.1 days)

 Removal In Wastewater Treatment:
 Total removal: 3.12 percent
 Total biodegradation: 0.10 percent
 Total sludge adsorption: 2.99 percent
 Total to Air: 0.02 percent
 (using 10000 hr Bio P,A,S)

 Level III Fugacity Model:
 Mass Amount Half-Life Emissions
 (percent) (hr) (kg/hr)
 Air 0.872 10.9 1000 
 Water 26.2 360 1000 
 Soil 72.8 720 1000 
 Sediment 0.182 3.24e+003 0 
 Persistence Time: 474 hr




 

Click to predict properties on the Chemicalize site

  • 1-Click Docking
  • 1-Click Scaffold Hop

Get an explanation on any task
Get unstuck with the help of our AI assistant in seconds
New