Phenethylamine C8H11N structure – Flashcards

Flashcard maker : Kieran Carr

C8H11N structure
Molecular Formula C8H11N
Average mass 121.180 Da
Density 1.0±0.1 g/cm3
Boiling Point 196.5±9.0 °C at 760 mmHg
Flash Point 90.6±0.0 °C
Molar Refractivity 39.3±0.3 cm3
Polarizability 15.6±0.5 10-24cm3
Surface Tension 38.1±3.0 dyne/cm
Molar Volume 125.9±3.0 cm3
  • Experimental data
  • Predicted – ACD/Labs
  • Predicted – EPISuite
  • Predicted – ChemAxon
  • Predicted – Mcule
  • Experimental Physico-chemical Properties
    • Experimental Melting Point:

      -60 °C Jean-Claude Bradley Open Melting Point Dataset 26549, 3030
      -60 °C Alfa Aesar A13402
      -60 °C Biosynth Q-201553
      -60 °C LabNetwork LN00011132
    • Experimental Boiling Point:

      194-195 °C Food and Agriculture Organization of the United Nations Phenethylamine
      200-202 °C Alfa Aesar A13402
      197-200 °C SynQuest 3630-1-17
      197-200 °C Oakwood 046873
      198 °C Biosynth Q-201553
      197-200 °C LabNetwork LN00011132
    • Experimental Flash Point:

      81 °C Alfa Aesar
      81 °C Biosynth Q-201553
      81 °F (27.2222 °C)
      Alfa Aesar A13402
      81 °C SynQuest 3630-1-17
      81 °C Oakwood 046873
      90 °C LabNetwork LN00011132
    • Experimental Gravity:

      20 g/mL Merck Millipore 1744
      20 g/l Merck Millipore 1744, 807334
      0.962 g/mL Biosynth Q-201553
      0.964 g/mL Alfa Aesar A13402
      0.962 g/mL SynQuest 3630-1-17
      0.962 g/mL Oakwood 046873
      81 g/mL Biosynth Q-201553
    • Experimental Refraction Index:

      1.533 Alfa Aesar A13402
      1.526-1.532 Food and Agriculture Organization of the United Nations Phenethylamine
      1.533 SynQuest 3630-1-17
  • Predicted Physico-chemical Properties
    • Predicted Melting Point:

      -60 °C J&K Scientific 169826
  • Miscellaneous
    • Appearance:

      Colourless to pale, slightly yellow liquid; Fishy aroma Food and Agriculture Organization of the United Nations Phenethylamine
    • Safety:

      22-34 Alfa Aesar A13402
      26-36/37/39-45 Alfa Aesar A13402
      8 Alfa Aesar A13402
      Danger Alfa Aesar A13402
      Danger Biosynth Q-201553
      DANGER: CORROSIVE, burns skin and eyes Alfa Aesar A13402
      GHS05; GHS06 Biosynth Q-201553
      H301; H314 Biosynth Q-201553
      H301-H314 Alfa Aesar A13402
      IRRITANT Matrix Scientific 074942
      P260-P301+P310-P303+P361+P353-P305+P351+P338-P405-P501a Alfa Aesar A13402
      P280; P305+P351+P338; P310 Biosynth Q-201553
      R22,R34 SynQuest 3630-1-17
      S23,S24/25,S26,S36/37/39,S45 SynQuest 3630-1-17
    • Target Organs:

      Others TargetMol T2935
    • Bio Activity:

      Others TargetMol T2935
  • Gas Chromatography
    • Retention Index (Kovats):

      1136 (estimated with error: 83) NIST Spectra mainlib_229486, replib_161691, replib_250048, replib_42275
      1125 (Program type: Isothermal; Col… (show more) umn class: Standard non-polar; Column length: 1.5 m; Column type: Packed; CAS no: 64040; Active phase: SE-30; Carrier gas: He; Substrate: Chromosorb G HP (80-100 mesh); Data type: Kovats RI; Authors: Ramsey, J.D.; Lee, T.D.; Osselton, M.D.; Moffat, A.C., Gas-liquid chromatographic retention indices of 296 non-drug substances on SE-30 or OV-1 likely to be encountered in toxicological analyses, J. Chromatogr., 184, 1980, 185-206.) NIST Spectra nist ri
      1100 (Program type: Isothermal; Col… (show more) umn class: Standard non-polar; Column length: 6 ft; Column type: Packed; CAS no: 64040; Active phase: OV-101; Carrier gas: N2; Substrate: Chromosorb W; Data type: Kovats RI; Authors: McLinden, V.J.; Stenhouse, A.M., A chromatography system for drug identification, Forensic Sci. Int., 13, 1979, 71-79.) NIST Spectra nist ri
      1120 (Program type: Isothermal; Col… (show more) umn class: Standard non-polar; Column length: 2 m; Column type: Packed; CAS no: 64040; Active phase: SE-30; Data type: Kovats RI; Authors: Moffat, A.C.; Stead, A.H.; Smalldon, K.W., Optimum use of paper, thin-layer and gas-liquid chromatography for the identification of basic drugs. III. Gas-liquid chromatography, J. Chromatogr., 90, 1974, 19-33.) NIST Spectra nist ri
      1103 (Program type: Isothermal; Col… (show more) umn class: Semi-standard non-polar; Column type: Packed; Start T: 120 C; CAS no: 64040; Active phase: Apiezon L; Substrate: Chromosorb W; Data type: Kovats RI; Authors: Donike, M.; Stratmann, D., Gas-chromatographische identifizierung von stimulantien der phenylathylaminreihe mit hilfe der retnetions-indices, Z. Anal. Chem., 279(2), 1976, 129-131.) NIST Spectra nist ri
      1605 (Program type: Isothermal; Col… (show more) umn class: Standard polar; Column type: Packed; Start T: 120 C; CAS no: 64040; Active phase: PEG-20M; Substrate: Chromosorb W; Data type: Kovats RI; Authors: Donike, M.; Stratmann, D., Gas-chromatographische identifizierung von stimulantien der phenylathylaminreihe mit hilfe der retnetions-indices, Z. Anal. Chem., 279(2), 1976, 129-131.) NIST Spectra nist ri
      1622 (Program type: Isothermal; Col… (show more) umn class: Standard polar; Column length: 1 m; Column type: Packed; CAS no: 64040; Active phase: Carbowax 20M; Data type: Kovats RI; Authors: Moffat, A.C.; Stead, A.H.; Smalldon, K.W., Optimum use of paper, thin-layer and gas-liquid chromatography for the identification of basic drugs. III. Gas-liquid chromatography, J. Chromatogr., 90, 1974, 19-33.) NIST Spectra nist ri
    • Retention Index (Normal Alkane):

      1079 (Program type: Ramp; Column cl… (show more) ass: Standard non-polar; Column type: Capillary; CAS no: 64040; Active phase: Polydimethyl siloxanes; Data type: Normal alkane RI; Authors: Zenkevich, I.G.; Chupalov, A.A., New Possibilities of Chromato Mass Pectrometric Identification of Organic Compounds Using Increments of Gas Chromatographic Retention Indices of Molecular Structural Fragments, Zh. Org. Khim. (Rus.), 32(5), 1996, 656-666, In original 656-666.) NIST Spectra nist ri
      1111 (Program type: Ramp; Column cl… (show more) ass: Standard non-polar; Column type: Other; CAS no: 64040; Active phase: Methyl Silicone; Data type: Normal alkane RI; Authors: Ardrey, R.E.; Moffat, A.C., Gas-liquid chromatographic retention indices of 1318 substances of toxicological interest on SE-30 or OV-1 stationary phase, J. Chromatogr., 220, 1981, 195-252.) NIST Spectra nist ri
    • Retention Index (Linear):

      1069.9 (Program type: Ramp; Column cl… (show more) ass: Standard non-polar; Column type: Capillary; Heat rate: 8 K/min; Start T: 35 C; End T: 300 C; CAS no: 64040; Active phase: OV-1; Data type: Linear RI; Authors: Gautzsch, R.; Zinn, P., Use of incremental models to estimate the retention indexes of aromatic compounds, Chromatographia, 43(3/4), 1996, 163-176.) NIST Spectra nist ri
      1115 (Program type: Ramp; Column cl… (show more) ass: Standard non-polar; Column length: 3.05 m; Column type: Packed; Heat rate: 10 K/min; Start T: 40 C; End T: 250 C; End time: 60 min; Start time: 4 min; CAS no: 64040; Active phase: SE-30; Carrier gas: He; Substrate: Supelcoport and Chromosorb; Data type: Linear RI; Authors: Peng, C.T.; Ding, S.F.; Hua, R.L.; Yang, Z.C., Prediction of Retention Indexes I. Structure-Retention Index Relationship on Apolar Columns, J. Chromatogr., 436, 1988, 137-172., Program type: Ramp; Column cl… (show more) ass: Standard non-polar; Column type: Capillary; CAS no: 64040; Active phase: Methyl Silicone; Data type: Linear RI; Authors: Peng, C.T.; Yang, Z.C.; Maltby, D., Prediction of retention indexes. III. Silylated derivatives of polar compounds, J. Chromatogr., 586, 1991, 113-129.) NIST Spectra nist ri
      1098 (Program type: Ramp; Column cl… (show more) ass: Standard non-polar; Column diameter: 0.75 mm; Column length: 30 m; Column type: Capillary; Heat rate: 10 K/min; Start T: 160 C; End T: 280 C; End time: 12 min; CAS no: 64040; Active phase: SPB-1; Carrier gas: He; Phase thickness: 1.0 um; Data type: Linear RI; Authors: Christ, D.W.; Noomano, P.; Rosas, M.; Rhone, D., Retention indices by wide-bore capillary gas chromatography with nitrogen-phosphorus detection, J. Anal. Toxicol., 12, 1988, 84-88.) NIST Spectra nist ri
      1133 (Program type: Ramp; Column cl… (show more) ass: Standard non-polar; Column diameter: 0.25 mm; Column length: 15 m; Column type: Capillary; Heat rate: 5 K/min; Start T: 100 C; End T: 295 C; CAS no: 64040; Active phase: SE-30; Carrier gas: He; Phase thickness: 0.25 um; Data type: Linear RI; Authors: Anderson, W.H.; Stafford, D.T., Applications of capillary gas chromatography in routine toxicological analyses, J. Hi. Res. Chromatogr. & Chromatogr. Comm., 6, 1983, 247-254.) NIST Spectra nist ri
      1120 (Program type: Ramp; Column cl… (show more) ass: Standard non-polar; Column length: 1.8 m; Column type: Packed; Heat rate: 8 K/min; Start T: 130 C; End T: 290 C; End time: 8 min; Start time: 2 min; CAS no: 64040; Active phase: SE-30; Carrier gas: N2; Substrate: Chromosorb W; Data type: Linear RI; Authors: Perrigo, B.J.; Peel, H.W., The use of retention indices and temperature-programmed gas chromatography in analytical toxicology, J. Chromatogr. Sci., 19, 1981, 219-226.) NIST Spectra nist ri
      1638 (Program type: Ramp; Column cl… (show more) ass: Standard polar; Column length: 3.05 m; Column type: Packed; Heat rate: 8 K/min; Start T: 40 C; End T: 200 C; End time: 60 min; Start time: 4 min; CAS no: 64040; Active phase: Carbowax 20M; Substrate: Supelcoport; Data type: Linear RI; Authors: Peng, C.T.; Yang, Z.C.; Ding, S.F., Prediction of rentention idexes. II. Structure-retention index relationship on polar columns, J. Chromatogr., 586, 1991, 85-112.) NIST Spectra nist ri

Predicted data is generated using the ACD/Labs Percepta Platform – PhysChem Module

Density: 1.0±0.1 g/cm3
Boiling Point: 196.5±9.0 °C at 760 mmHg
Vapour Pressure: 0.4±0.4 mmHg at 25°C
Enthalpy of Vaporization: 43.3±3.0 kJ/mol
Flash Point: 90.6±0.0 °C
Index of Refraction: 1.537
Molar Refractivity: 39.3±0.3 cm3
#H bond acceptors: 1
#H bond donors: 2
#Freely Rotating Bonds: 2
#Rule of 5 Violations: 0
ACD/LogP: 1.46
ACD/LogD (pH 5.5): -1.52
ACD/BCF (pH 5.5): 1.00
ACD/KOC (pH 5.5): 1.00
ACD/LogD (pH 7.4): -0.84
ACD/BCF (pH 7.4): 1.00
ACD/KOC (pH 7.4): 1.00
Polar Surface Area: 26 Å2
Polarizability: 15.6±0.5 10-24cm3
Surface Tension: 38.1±3.0 dyne/cm
Molar Volume: 125.9±3.0 cm3

Predicted data is generated using the US Environmental Protection Agency’s EPISuite™

 
 Log Octanol-Water Partition Coef (SRC):
 Log Kow (KOWWIN v1.67 estimate) = 1.34
 Log Kow (Exper. database match) = 1.41
 Exper. Ref: Hansch,C et al. (1995)

 Boiling Pt, Melting Pt, Vapor Pressure Estimations (MPBPWIN v1.42):
 Boiling Pt (deg C): 203.81 (Adapted Stein & Brown method)
 Melting Pt (deg C): 10.89 (Mean or Weighted MP)
 VP(mm Hg,25 deg C): 0.409 (Mean VP of Antoine & Grain methods)
 MP (exp database): -60 deg C
 BP (exp database): 197.5 deg C

 Water Solubility Estimate from Log Kow (WSKOW v1.41):
 Water Solubility at 25 deg C (mg/L): 6.325e+004
 log Kow used: 1.41 (expkow database)
 no-melting pt equation used

 Water Sol Estimate from Fragments:
 Wat Sol (v1.01 est) = 10115 mg/L

 ECOSAR Class Program (ECOSAR v0.99h):
 Class(es) found:
 Aliphatic Amines

 Henrys Law Constant (25 deg C) [HENRYWIN v3.10]:
 Bond Method : 8.12E-007 atm-m3/mole
 Group Method: 1.81E-007 atm-m3/mole
 Henrys LC [VP/WSol estimate using EPI values]: 1.031E-006 atm-m3/mole

 Log Octanol-Air Partition Coefficient (25 deg C) [KOAWIN v1.10]:
 Log Kow used: 1.41 (exp database)
 Log Kaw used: -4.479 (HenryWin est)
 Log Koa (KOAWIN v1.10 estimate): 5.889
 Log Koa (experimental database): None

 Probability of Rapid Biodegradation (BIOWIN v4.10):
 Biowin1 (Linear Model) : 1.0264
 Biowin2 (Non-Linear Model) : 0.9916
 Expert Survey Biodegradation Results:
 Biowin3 (Ultimate Survey Model): 2.9030 (weeks )
 Biowin4 (Primary Survey Model) : 3.6525 (days-weeks )
 MITI Biodegradation Probability:
 Biowin5 (MITI Linear Model) : 0.4197
 Biowin6 (MITI Non-Linear Model): 0.4130
 Anaerobic Biodegradation Probability:
 Biowin7 (Anaerobic Linear Model): 0.6586
 Ready Biodegradability Prediction: NO

Hydrocarbon Biodegradation (BioHCwin v1.01):
 Structure incompatible with current estimation method!

 Sorption to aerosols (25 Dec C)[AEROWIN v1.00]:
 Vapor pressure (liquid/subcooled): 49.7 Pa (0.373 mm Hg)
 Log Koa (Koawin est ): 5.889
 Kp (particle/gas partition coef. (m3/ug)):
 Mackay model : 6.03E-008 
 Octanol/air (Koa) model: 1.9E-007 
 Fraction sorbed to airborne particulates (phi):
 Junge-Pankow model : 2.18E-006 
 Mackay model : 4.83E-006 
 Octanol/air (Koa) model: 1.52E-005 

 Atmospheric Oxidation (25 deg C) [AopWin v1.92]:
 Hydroxyl Radicals Reaction:
 OVERALL OH Rate Constant = 37.6779 E-12 cm3/molecule-sec
 Half-Life = 0.284 Days (12-hr day; 1.5E6 OH/cm3)
 Half-Life = 3.407 Hrs
 Ozone Reaction:
 No Ozone Reaction Estimation
 Fraction sorbed to airborne particulates (phi): 3.5E-006 (Junge,Mackay)
 Note: the sorbed fraction may be resistant to atmospheric oxidation

 Soil Adsorption Coefficient (PCKOCWIN v1.66):
 Koc : 717.5
 Log Koc: 2.856 

 Aqueous Base/Acid-Catalyzed Hydrolysis (25 deg C) [HYDROWIN v1.67]:
 Rate constants can NOT be estimated for this structure!

 Bioaccumulation Estimates from Log Kow (BCFWIN v2.17):
 Log BCF from regression-based method = 0.386 (BCF = 2.431)
 log Kow used: 1.41 (expkow database)

 Volatilization from Water:
 Henry LC: 1.81E-007 atm-m3/mole (estimated by Group SAR Method)
 Half-Life from Model River: 3562 hours (148.4 days)
 Half-Life from Model Lake : 3.895E+004 hours (1623 days)

 Removal In Wastewater Treatment:
 Total removal: 1.96 percent
 Total biodegradation: 0.09 percent
 Total sludge adsorption: 1.86 percent
 Total to Air: 0.01 percent
 (using 10000 hr Bio P,A,S)

 Level III Fugacity Model:
 Mass Amount Half-Life Emissions
 (percent) (hr) (kg/hr)
 Air 0.684 6.81 1000 
 Water 38 360 1000 
 Soil 61.3 720 1000 
 Sediment 0.0863 3.24e+003 0 
 Persistence Time: 406 hr




 

Click to predict properties on the Chemicalize site

  • 1-Click Docking
  • 1-Click Scaffold Hop

Get an explanation on any task
Get unstuck with the help of our AI assistant in seconds
New