Chapter 2: Working Inside a Computer – Flashcards

Unlock all answers in this set

Unlock answers
question
Along with the processor, what other device is the highest heat producer in the system?
answer
Video Card
question
What determines the physical size of a power supply and the placement of screw holes?
answer
Form Factor
question
What do you call a connector on a motherboard that consists of pins that stick up from the board? S
answer
Header
question
Which of the following can be described as round plastic or metal pegs that separate the motherboard from the bottom of the case?
answer
Stand-off
question
Which technology may require that you purchase a power supply that specifically supports that technology?
answer
SLI
question
To what should you normally clip the ground bracelet before you work inside the computer case? Selected Answer:
answer
The side of the computer case
question
Under what circumstance is a liquid cooling system most likely used?
answer
overclocking
question
What does a small triangle embedded on a connector signify?
answer
The wire nearest the triangle is pin 1
question
Which of the following is the Intel maximum degree limit for processors?
answer
185 F
question
Which of the following is true about installing the motherboard and connecting power?
answer
a 4-pin power cord supplies supplemental power to the processor
question
Which of the following is NOT a typical connector found on the front panel header?
answer
Sata Controller
question
Which of the following is NOT a good practice when working inside a computer case?
answer
be sure to hold expansion cards by the edge connector
question
Which material is a cooler that sits atop the CPU most likely made of?
answer
copper
question
Which of the following is the second step in opening the case of a working computer?
answer
power down the system and unplug it
question
What is placed between the bottom of the cooler heat sink and the top of the processor that makes an airtight connection between the fan and processor?
answer
thermal compound
question
When disassembling a computer, it's okay to stack circuit boards on top of each other as long as you follow ESD protection rules.
answer
False
question
A board with PCIe slots might have a 4-pin Molex power connector to provide additional power to some types of PCIe boards.
answer
True
question
A system always needs the 4-pin auxiliary power connector, and sometimes needs the P1 connector as well.
answer
False
question
Immediately after you unplug the computer from the power outlet, you're safe to begin working inside the case.
answer
False
question
The motherboard sits on elevated screw holes or spacers to keep it from touching the case. Selected Answer:
answer
True
Get an explanation on any task
Get unstuck with the help of our AI assistant in seconds
New