Copper(II) chloride Cl2Cu structure – Flashcards

Flashcard maker : Aiden Boyd

Cl2Cu structure
Molecular Formula Cl2Cu
Average mass 134.452 Da
Density
Boiling Point
Flash Point
Molar Refractivity
Polarizability
Surface Tension
Molar Volume
  • Experimental data
  • Predicted – ACD/Labs
  • Predicted – EPISuite
  • Predicted – ChemAxon
  • Experimental Physico-chemical Properties
    • Experimental Melting Point:

      620 °C (Literature) LabNetwork LN00224813

Predicted data is generated using the ACD/Labs Percepta Platform – PhysChem Module

Density:
Boiling Point:
Vapour Pressure:
Enthalpy of Vaporization:
Flash Point:
Index of Refraction:
Molar Refractivity:
#H bond acceptors: 0
#H bond donors: 0
#Freely Rotating Bonds: 0
#Rule of 5 Violations:
ACD/LogP:
ACD/LogD (pH 5.5):
ACD/BCF (pH 5.5):
ACD/KOC (pH 5.5):
ACD/LogD (pH 7.4):
ACD/BCF (pH 7.4):
ACD/KOC (pH 7.4):
Polar Surface Area: 0 Å2
Polarizability:
Surface Tension:
Molar Volume:

Predicted data is generated using the US Environmental Protection Agency’s EPISuite™

 
 Log Octanol-Water Partition Coef (SRC):
 Log Kow (KOWWIN v1.67 estimate) = 0.05

 Boiling Pt, Melting Pt, Vapor Pressure Estimations (MPBPWIN v1.42):
 Boiling Pt (deg C): 515.63 (Adapted Stein & Brown method)
 Melting Pt (deg C): 205.22 (Mean or Weighted MP)
 VP(mm Hg,25 deg C): 4.42E-010 (Modified Grain method)
 Subcooled liquid VP: 3.58E-008 mm Hg (25 deg C, Mod-Grain method)

 Water Solubility Estimate from Log Kow (WSKOW v1.41):
 Water Solubility at 25 deg C (mg/L): 8.009e+004
 log Kow used: 0.05 (estimated)
 no-melting pt equation used

 Water Sol Estimate from Fragments:
 Wat Sol (v1.01 est) = 63589 mg/L

 ECOSAR Class Program (ECOSAR v0.99h):
 Class(es) found:
 Neutral Organics

 Henrys Law Constant (25 deg C) [HENRYWIN v3.10]:
 Bond Method : Incomplete
 Group Method: Incomplete
 Henrys LC [VP/WSol estimate using EPI values]: 9.763E-016 atm-m3/mole

 Log Octanol-Air Partition Coefficient (25 deg C) [KOAWIN v1.10]:
 Can Not Estimate (can not calculate HenryLC)

 Probability of Rapid Biodegradation (BIOWIN v4.10):
 Biowin1 (Linear Model) : 0.6835
 Biowin2 (Non-Linear Model) : 0.7502
 Expert Survey Biodegradation Results:
 Biowin3 (Ultimate Survey Model): 2.9020 (weeks )
 Biowin4 (Primary Survey Model) : 3.6538 (days-weeks )
 MITI Biodegradation Probability:
 Biowin5 (MITI Linear Model) : 0.3121
 Biowin6 (MITI Non-Linear Model): 0.2049
 Anaerobic Biodegradation Probability:
 Biowin7 (Anaerobic Linear Model): 0.8361
 Ready Biodegradability Prediction: NO

Hydrocarbon Biodegradation (BioHCwin v1.01):
 Structure incompatible with current estimation method!

 Sorption to aerosols (25 Dec C)[AEROWIN v1.00]:
 Vapor pressure (liquid/subcooled): 4.77E-006 Pa (3.58E-008 mm Hg)
 Log Koa (): not available
 Kp (particle/gas partition coef. (m3/ug)):
 Mackay model : 0.628 
 Octanol/air (Koa) model: not available
 Fraction sorbed to airborne particulates (phi):
 Junge-Pankow model : 0.958 
 Mackay model : 0.98 
 Octanol/air (Koa) model: not available

 Atmospheric Oxidation (25 deg C) [AopWin v1.92]:
 Hydroxyl Radicals Reaction:
 OVERALL OH Rate Constant = 0.0000 E-12 cm3/molecule-sec
 Half-Life = -------
 Ozone Reaction:
 No Ozone Reaction Estimation
 Fraction sorbed to airborne particulates (phi): 0.969 (Junge,Mackay)
 Note: the sorbed fraction may be resistant to atmospheric oxidation

 Soil Adsorption Coefficient (PCKOCWIN v1.66):
 Koc : 23.74
 Log Koc: 1.376 

 Aqueous Base/Acid-Catalyzed Hydrolysis (25 deg C) [HYDROWIN v1.67]:
 Rate constants can NOT be estimated for this structure!

 Bioaccumulation Estimates from Log Kow (BCFWIN v2.17):
 Log BCF from regression-based method = 0.500 (BCF = 3.162)
 log Kow used: 0.05 (estimated)

 Volatilization from Water:
 Henry LC: 9.76E-016 atm-m3/mole (calculated from VP/WS)
 Half-Life from Model River: 6.953E+011 hours (2.897E+010 days)
 Half-Life from Model Lake : 7.586E+012 hours (3.161E+011 days)

 Removal In Wastewater Treatment:
 Total removal: 1.85 percent
 Total biodegradation: 0.09 percent
 Total sludge adsorption: 1.76 percent
 Total to Air: 0.00 percent
 (using 10000 hr Bio P,A,S)

 Level III Fugacity Model:
 Mass Amount Half-Life Emissions
 (percent) (hr) (kg/hr)
 Air 7.91e-007 1e+005 1000 
 Water 38.4 360 1000 
 Soil 61.5 720 1000 
 Sediment 0.071 3.24e+003 0 
 Persistence Time: 583 hr




 

Click to predict properties on the Chemicalize site

Get an explanation on any task
Get unstuck with the help of our AI assistant in seconds
New