MTS – Flashcards
Unlock all answers in this set
Unlock answersquestion
Purpose of Navy Training
answer
Systematic approach to what and how best to train
question
What is the instruction for ORM
answer
OPNAVINST 3500.39
question
What is the instruction for Navy Safety and Occupational Health(SOH)
answer
OPNAVINST 5100.19
question
What is the instruction for Policy and Procedures for Conducting High-Risk Taining?
answer
OPNAVINST 1500.75
question
What is the instruction for Safety and Occpational Health, and High Risk Training Safety Program Manual
answer
NETCINST 5100.1
question
101.1 Explain these parts of the five step process as they aply to ORM(IAMIS): A. Identifying hazards B. Assessing Hazard C. Making Risk decision D. Implement controls E. Supervise
answer
A. look around training/work area and find threats to safety. B. Decide how severe the injury could be or the value of equipment that could be damaged. C. Make a decision on the possibility of an accident or injury happening due to risk, and find the corrections to mitigate the risk. D. Watch to make sure the corrections are implemented. E. Monitoring and oversight of training/work process.
question
.2 Complete a risk assessment of a course(high risk instructor only)
answer
A. Ice on side-walks B. Slips and falls could lead to injury C. Very likely in icy conditions. D. Impliment 'at ease march' and salt sidewalks. E. RDC insures 'at ease march' is practiced and side-walks are salted.
question
.3 Define "high-risk"
answer
High risk training could involve: Death, permanent injury, or damage to equipment.
question
.4 Discuss what type of courses are considered "high-risk"
answer
High risk training occurs at: Battle stations, fire fighting, water survival/ Dive Motivator, live fire training departments
question
.5 Discuss the difference between these types of courses. A. Voluntary B. Involuntary
answer
Voluntary= High risk, and DOR is available. Involuntary= Accessions training(RTC or OCS), fire fighting, swimming, battle stations, live fire training, and DOR is not available.
question
.6 Discuss what Drop on Request "DOR" is and the procedures for conducting one.
answer
DOR= Drop On Request- voluntarily drop training -students should be encouraged to make statement and it must be written -Request needs to be reviewed by reviewing officer(E-7 or above)
question
.7 Discuss what Training Time Out "TTO" is and the procedures for conducting one.
answer
A student or staff member can call a training time out if they see an unsafe situation or if they feel they need a break from training. After a TTO is called the scene needs to be cleared to make sure it is safe to continue training.
question
.8 Discuss the purpose of the Emergency Action Plan(EAP) and how often must it be reviewed for accuracy of information. Identify the periodic requirements for fully exercising the EAP. How often is it to be fully exercised?
answer
Emergency Action Plan, is a narritive/ description of what should happen in the event of an accident in a particular work space. They should be reviewed quarterly and must be exercised once a year.
question
.9 Discuss periodic requirements for safety stand-downs.
answer
Safety stand-downs should be held once a year and after a significant safety event occurs.
question
.10 Discuss the following as it pertains to "high risk" instructor. A. mishap reporting B. Site Augment Plans C. Special Course Indicator Code D. Core Unique Instructor Fundamentals E. Instructor Screening Process F. Evaluation Process G. Training Safety Officer
answer
A. WES II report: can be used for a recruit or staff. B. Each site has unique augmentation plans to reinforce highrisk instructions(1500.75). C. Special course Indicator Code: A or D. E. Instructor Screening Process:-physical screen: medical. -CFL stamp. -TSO: Training Safety Officer. F. Evaluation process G. Who is designated by CO and supervise all high risk training and CUIT.
question
.11 Discuss the importance of heat/cold stress, monitoring, and control in a training environment.
answer
The flags designate the training conditions: -If they can march -Straggle or not -Watch for dehydration.
question
Purpose of Navy Training
answer
Systematic approach to what and how best to train.
question
What are the five steps to ORM
answer
1. ID hazards 2. Assess hazards 3. Make risk decisions 4. Impliment controls 5. Surpervise
question
What and who is the CCA for RTC?
answer
Curriculum Control Authority, RADM Newborn
question
What and who is the CCMM for RTC?
answer
Course Curriculum Model Manager, Terry Schmegglemyer
question
Who is the CNET
answer
ADM Quinn
question
What is CUIT?
answer
Core Unique Instructor Training.
question
What is the instruction for Navy Instructor Manual
answer
NAVEDTRA 134
question
What is the instruction for Navy School Management Manual
answer
NAVEDTRA 135
question
102.1 State the purpose of the Navy Training System.
answer
It is a systematic approach to what to train and how best to train. The fleet will decide what we need to train. The school house decides how the training is conducted.
question
.2 Define the most essential, single link in the training chain.
answer
The instructor
question
.3 State and discuss the three qualities of an efficient and effective instructor.
answer
PAK: Personality, Ability(instructor and leadership ability), and Knowledge
question
.4 Discuss the Instructor's responsibilities in terms of: A. Responsibility to students B. Responsibility to training safety C. Responsibility to security D. Responsibility to curriculum.
answer
A. To the student: consider if they have been fed, rested, no concerns at home. B. Training Safety: Evacuation safety should be reviewed during every class. C. Security: This refers to the security clearances. D. Curriculum: The instructor should confirm the correctness, proper revision, line-out items that are out of date, and take corrections to course supervisor.
question
.5 List and discuss the four principles of Hohn Keller's model of motivational theory.
answer
John Keller 'CARS' Confident: Confident students will be better performers. Attention: body movement. Relevance: Staying on topic and keeping information useful. Satisfaction: Success at learning.
question
.6 List and discuss the key principles of applying motivation theory in a training situation.
answer
NIVIAA. Needs and Drives: tell the students they need this so they can keep they're job in the Navy. Incentives: Reward them, allow them to use the phone in boot camp. Values: Core values. Interest: Keep or expand upon particular interest. Achievement: Reaching graduation and or getting flags. Attitude: Without a good attitude learning new material is difficult.
question
.7 State the ultimate goal of instruction.
answer
The ultimate goal of instruction: Motivate students to learn objectives and bring/ apply what they have learned to the fleet.
question
.8 State and discuss the six laws of learning.
answer
IREEPR. Intensity: Intense situation is easy to remember. Readiness: Classroom, curriculum, and instructor. Effect: There is an effect if you don't perform properly. Exercise: repetition. Primacy: Learning something the first time is the way you remember. Recency: The last thing you learned.
question
.9 State and discuss five ways of learning.
answer
IT AIT: Insight: Grasping the "big picture". Transfer: 'moving' or transferring of knowledge to a new topic. Association: tying the taught skill to 'known knowledge'. Imitation: 'Monkey see, monkey do..." Trial and Error: "discovery" way of learning.
question
.10 Discuss how motivation affects student learning.
answer
Motivation is THE primary key to how well a student will learn.
question
.11 State and discuss the types of sensory learners.
answer
Visual: They need to hear something, Audio: They need to hear a topic to learn and understand. Kinesthetic: People need to carry out a physical activity to learn a topic, also known as tactile-kinesthetic.
question
.12 State and discuss the four basic learning styles.
answer
CARA. Concrete: Need to watch/ touch the lesson, theories are hard to learn. Active: Must do it. Reflective: Refer to past experiences. Abstract: Good with theory, reading and lecture.
question
.13 Discuss the barriers to effective communication.
answer
Communication should 'FLOE" Fear: Can inhibit confidence. Lack of common core experience: Fleet-returnees verse recruits. Over use of abstraction: Instructor uses too many navy acronyms. Environment: Background noise or room temperature.
question
.14 State and discuss the purpose of an effective communication process.
answer
Necessary parts to effective communication are: Sender, Message, Delivery Vehicle, Receiver, Feedback, Medium(voice, airwaves, or email.)
question
.15 Discuss the importance of listening communication skills.
answer
Listening is an active process of hearing and concentration.
question
.16 Discuss six factors that must be considered in planning instructional delivery.
answer
The six factors for planning instructional delivery (GIRAF P): Grammar: use proper speech, Inflection: voice sound, Rate of speech: should be 100-140 words/min, Articulation: speaking properly, Force: Increase intensity, Pause: Allows students to think about answers.
question
.17 State and discuss the importance of body movement as an important part of successful communication.
answer
Body movements can REC: Reinforce, Emphasize, and Clarify ideas being taught and messages being sent.
question
.18 State and discuss the four purposes of oral question.
answer
FADS: The importance of oral questions is: Focuses attention, Arouses interest, Drill topic or subject matter, Stimulates thought.
question
.19 State and discuss the characteristics of a good oral question.
answer
The characteristics of a good oral question(CLU): Clarity of meaning: confirm that question is on desired topic, Level of instruction: confirm that the instruction justified the question, Use of interrogative: Who, What, When, Where, Why, How.
question
.20 Discuss the types and purpose of oral questions.
answer
FILM-CTY('film city'): Types of oral questions: Factual: One correct answer. Interest arousing: Peaks a student curiosity Leading: Step by step question. Multiple answer: Numerous correct answers. Canvasing: Encouraging group participation. Thought provoking: A question that causes a student to think. Yes/No:
question
.21 State the five steps of the five-step questioning technique.
answer
APPLE: Ask the question, Pause-wait for students to think about an appropriate answer, Pick-choose a student to answer the question and use qual opportunity by choosing various students, Listen-listen to the answer the student gives, Emphasize-emphasize the correct answer.
question
.22 List and discuss the different instructional methods
answer
GTDRLL('Good To DRiLL')Instructional methods: Lesson: Interacting with student and this is the Navy's primary method used. Lecture:Oneway information without the use of audio-visual support, found most often in colleges. Lecture with audio visuals: Using audio-visual instruments, and it is mostly a oneway conversation, the instructor speaks 'lecturing' the students. Demonstration: Show students how something should be done, which will assist the visual learners. Role Play: Have instructors act a particular interaction/ situation out, expanding upon the particular lesson that is being taught. Gaming Theory: Instructor designs a game that teaches a particular lesson or idea. Team Demensional: Students functioning as a team to accomplish learning objectives.
question
.23 State and discuss the three parts of a learning objective.
answer
The parts of a learning objective: Behavior: Actions that should be done by a student. Condition: Rules or environment that the student is expected to deal with. Standard: An expectation of student to meet. Example: Student will swim (behavior)across a pool(standard), blind-folded and hand cuffed(condition), within sixty seconds(standard).
question
.24 Discuss the two methods of testing and their importance.
answer
The two methods of testing are Knowledge and Performance. Knowledge testing, is the traditional written tests. Performance testing, would be a student demonstrating a particular task, IE: how to put on an SCBA.
question
.25 Explain the five learning levels a knowledge test item may test.
answer
RRCAA: The five levels of learning are: Recognition, Recall, Comprehend/Understand, Application, Analysis/Evaluation/Synthesis.
question
.26 Discuss the different types of performance tests.
answer
The different types of performance tests are: Product: the method use to reach the end product doesn't matter, so long as the product is reached. Process: The sequence of completing the job is most important aspect, starting from A going to Z. Combination: Using both Product and Process technique.
question
.27 List and describe the primary materials used in presenting instruction.
answer
The materials used to present instruction: Lesson plan, IMM, Instruction Sheets: OJPAID 1. Outline 2. Jobsheet 3. Problem sheet 4.Assignment sheet 5.Information sheet 6. Diagram sheet
question
.28 Discuss student feedback/course critique.
answer
The various critiques are: Course, Instructor, quality of life (galley, berthing,MWR ,etc) safety, training effectiveness.
question
.29 Discuss the following programs and include possible actions and responsibilities of an instructor. A. Equal Employment Opportunity(EEO) B. Navy Core Values. C. Sexaul Harassment. D. Diversity.
answer
A. Equal Opportunity: The instructor that is conducting the class will affirm that all students should be treated equally and fairly regardless of class standing, rank, ethnicity or race. These aspects of the students should not influence any aspect of the students experience and all students should be treated equally. In the event that equal opportunity is not practiced the instructor should immediately intervene and ensure the student doesn't feel that they are being mistreated. B: Navy Core Values (Honor, Courage, Commitment): It is the instructor's responsibility to practice and ensure these values are practiced during every class that is taught, and by students. In the event that these values are not practice, the instructor may need to instruct the students on how to empliment and live by these values. C: Sexaul Harassment: It is the instructors responsibility to monitor that there will be no inappropriate comments, physical contact between instructors and students or (inst to inst, or student to student) that could be construd as sexual harrassment. If something does occur, the instructor should immediately intervene to correct the situation, and if an incident does occur the proper channels in the command should be notified. D. Diversity: The application of team work, without the influence of playing favorites.
question
.30 Discuss the instructor qualification process.
answer
The instructor qualification process: Attend NITC(Navy Instructor Training Course), Go through screening process for the particular possition, High Risk screening, Practice instructing, Complete 1 Sat "in house" eval, complete 1 Sat "Out of house" eval, Get a signed letter of instructor designation.
question
.31 Discuss the instructor disqualification factors and process.
answer
The disqualification process for instructors: The learning center is the authority for what constitutes a disqualification. This may be a temporary situation or the 9502 NEC may be removed from the individuals record.
question
.32 Discuss the items with your mentor that can be found on the MTS Community of Practice(CoP)
answer
COP: Community Of Practice(something you can get paid for or receive a salary), COI: Community Of Interest(hobbie)
question
What is the instruction for Navy School Management Manual?
answer
NAVEDTRA 135(SERIES)
question
What is an efficient and Effective instructor?
answer
Efficient: Good on time management. Effective: Make sure students gain the knowledge, more worried about students learning than staying on time line. -Should be balanced between both -Can be balanced with proper management.
question
What is the purpose of oral questions?
answer
FADS: Focus the attention, Arrouses interest, Drillls subject matter, and Stimulates thought.
question
103.1 List the responsibility of each of the following members of the training organization structure.
answer
See matrix
question
.2 Discuss the purpose of the Catalog of Navy Training(CANTRAC)
answer
The "Catalog of Navy Training" (CANTRAC) is composed of two lists(volumes). Vol I: List of training facilities, Vol II: List of courses description that has data.
question
.3 Discuss the functionality of Corporate Enterprise and Training Resource Activity System (CeTARS)
answer
CeTARS is a Large Navy wide data base to support Navy training. It contains: Grades, Quals, student information, instructor information, classroom information, and course information.
question
.4 Discus the use of a Course Identification Number(CIN)
answer
Course Identification Number, each course has exactly one. (three parts) Functional commander - Skilled defense group - Sequence number
question
.5 Discuss the use of a Course Data Processing(CDP) code.
answer
Course Data Processing, identifies the training facility where a course is taught. A course will have as many CDPs as training facilities where it is taught.
question
.6 Discuss who is responsible for ensuring accuracy of data with CeTARS.
answer
The course supervisor is responsible to ensure data within CeTARS.
question
.7 Discuss the relationship between CeTARS and CANTRAC.
answer
CANTRAC(two lists) pulls information from CeTARS(large data base) using Discoverer(querry tool)
question
.8 Describe the "A", "C", and "F" type courses of instruction.
answer
A= A school, designates a rate. C= C school, designates an NEC (Navy Education Code)and it will also give you a billet. F= Fleet training, "Further on fleet Training".
question
.9 Discuss what a Person Event Code(PEVT) is and, where it is found and entered.
answer
The "Personal Event Code" (PEVT) is used to document major events on students record, IE: Enrollment, Failures, Graduation, Orders given. And it found in CeTARS.
question
.10 Discuss when an Academic Review Board (ARB) may be convened.
answer
Typically an ARB convienes due to a students poor or dropping performance in the course or school, or classroom behavior.
question
.11 Descrie the Academic Review Board(ARB) process.
answer
The first priority of the ARB is to identify the problem that the student is having. The second priority of the ARB is to fix the problem and motivate the student. The student will be informed that their performance has changed considerably, and if an ARB needs to convene the student will be notified. The members that will attend the ARB will be: Student, Instructor, Course Manager/ Supervisor, Learning Standard Officer(LSO), Training Support Command(TSC), Div O. Items to be brought to ARB: Grades/ training jacket, Students notes, Students guide, Student questionaire(which is given the day before the board), instructor guide.
question
.12 Discuss who is responsible for maintaining a Master Record Audit Trail and what it contains?
answer
The Course Curriculum Model Manager(CCMM) is responsible for audit trail. The audit contains a summary of major events impacting the course including correspondence. The correspondence has: Revisions, Letters of Promulgation(LOP), Former Course Review(FCR).
question
.13 Describe the evaluation of instructors in laboratory/ classroom/facilitated environments.
answer
The areas which instructors are evaluated are: Introduction, Presentation, Summary and Review, Instructor student interaction, and also: Safety, and Curriculum effectiviness. Any category that has above or below standard marks, needs to have comments added to those particular sections. Lab/classroom ratios should approximate Lab/classroom evaluation ratios. For example: 2 days of class and 3 days of lab, the evaluation should equate to 40% classroom evaluations and 60% should be Lab evaluations.
question
.14 Discuss the student critique program within your learning environment.
answer
The student critique includes: Instructor critique, quality of life, curriculum, and safety.
question
.15 Discuss the importance of Formal Course Reviews(FCRs) and audit trails.
answer
Formal Course Reviews are internal to the school and gives feed back on training, which checks the validity of qualifications, curriculum, testing critiques(which is feed back on how the course is being taught), and has states on the course(stats include grades, number of classes convened, drops, and ARBs.
question
.16 Identify the required periodicity for conducting FCRs per current NETC guidance.
answer
They should be conducted no more than 3 years apart, but they like them every 2 years.
question
What is the students chain of command?
answer
There are two: The Training Support Command(TSC) which handles the watch sections, and other side duties. The instructors, which handle the academic aspects of the students life.
question
What is the instruction for Training Requirement Identification and Resourse Sponsor
answer
NETCINST 1500.9
question
What is the instruction that governs Human Performance Requirement Review(HPRR)
answer
NAVEDTRA 133
question
What is the instruction that governs Navy School Management Manual?
answer
NAVEDTRA 135
question
104.1 State the purpose of a Human Performance Requirement Review(HPRR)
answer
The purpose is to "re"- validate training, and relates training to the "big picture"-how it effects the fleet.
question
.2 State the periodicity of conducting a HPRR.
answer
It should happen at least every 3 years. Side note: HPRR are large meetings of senior Subject Matter Experts(SME) from the fleets and the learning center.
question
.3 State the roles and responsibilities of the following for the HPRR process implementation and execution:
answer
see matrix
question
.4 Discuss the input data that affects training requirement validation.
answer
TCCD, CTTL, PPP, unresolved HPRR action chits, performance issue documentation, non-academic factor documentation, occupational standards, Navy Training System Plan(NTSP), Safety issue documentation, Job Duty Task Analysis (JDTA)
question
.5 State the four triggers to conduct a HPRR
answer
The four triggers are: 1. Required by sponsor, 2. Fleet feedback surveys: Completed by NAVMACK 3. Course surveillance: the CO does this(or OX/CMC) 4. Curriculum Control Authority(CCA) who is now: RADM Newborn
question
.6 State and describe four HPRR messages.
answer
1. Annual HPRR message: released 30 days prior to 1 Oct. 2. Announcement message: Comes out 90 days prior to the HPRR details the purpose of the HPRR as well as course(s) Request SMEs input. 3. Agenda message: released 60 days prior to date. 4. HPRR Action Chit: summerizes the HPRR, links to Community of Practice, list of quick wins/ easy fixes, provides Plan of Action and Mile-stones(POA&M) which is a list of dates for tasks to be completed.
question
.7 State the purpose of the HPRR action chit.
answer
The chit reviews the problems found by the HPRR, which implies action is going to be taken on the issues.
question
.8 Explain the correlation of a Formal Couse Review(FCR) and the HPRR process.
answer
Formal Course Review is internal review by the learning center. The HPRR is an external review to investigate the final product. Before HPRR an FCR should be completed
question
.9 Explain the process for findings for submission during a FCR.
answer
The process of findings for submissions: Findings are assessment results of a FCR. Review team publishes the findgs and establishes time-line for corrective action. Learning site formally responds per approved Plan Of Action and Milestones
question
.10 Discuss the purpose of Training Requirement Identification and Resourse Sponsor Commitment.
answer
Training Requirement Identification: This is what is being trained. Resourse sponsor provides the movey for training. Without commitment, the future of training will be unreliable. Comes from fleet resource sponsor commitment: make sure there is a money committed to the program.
question
.11 List the three forms of acceptable actions from a Resource Sponsor identifying the commitment of resources to a valid.
answer
The three forms of acceptable action: Naval message, Command letterhead letter, Digitally signed email.
question
What is the instruction for Utilization of Enlisted Occupational Standards for Training and Career Development?
answer
OPNAVINST 1500.74
question
105.1 Discuss the purpose of Occupational Standards(OCCSTDS).
answer
The purpose of occupational standards is a civilian term, which the Navy uses Navy Enlisted Ratings.
question
.2 List the primary basis for which OCCSTDS are used.
answer
Occupational Standards identifies the minimal skills and knowledge required to qualified to do a job. OCCSTDS are the basis for implementing and supporting actions for Manning, Distribution, Training, and Advancement.
question
.3 Explain where the remaining E4 and below OCCSTDS, that are not selected to be taught in "A" school, should be taught, e.g., in which other trining environments?
answer
They are to be taught OBT, on-board training or OJT on the job training.
question
.4 Explain each role as it pertains to OCCSTDS: A office of Chief of Naval Operations(OPNAV) B. Resource sponsors C. Fleet and Type Commanders. D.Navy Manpower Analysis Center (NAVMAC) E. Naval Eduction Training Command (NETC)
answer
A. Office of CNO(OPNAV): Review and approve OCCSTDS per OPNAVINST 1223.1 B.Resourse sponsors: Review and approve the Traingin Task Analysis(TTA) report. C. Fleet and type Commanders: Review Skills Management System(SMS) and OCCSTDS. D. Navy Manpower Analysis Center(NAVMAC): Ensures Skills Management System(SMS) surveys are conducted and OCCSTDS are issued in a timely manner and coordinated with the appropriate NTRR event schedule(s) 3,4 E. Naval Education Training Command: Develop and inplement training to meet the needs. **Implement training for needs of fleet, use all rating schools**
question
What is the instruction for Job Duty Task Analysis Management Manual?
answer
NAVEDTRA 137 (series)
question
What is the instruction for Utilization of Enlisted Occupational Standards for Traingin and Career Development
answer
OPNAVINST 1500.74
question
106.1 State the purpose of a Job Duty Task Analysis (JDTA)
answer
JDTA determines what to train. First step to end two end(E2E) step process. Ensuring that it is repeatable and defendable.
question
.2 State the roles and responsiblities of the following for the JDTA process implementation and execution: A. Naval Education Training Command B. NETC N7 C. Learning center commmanding officer D. Learning center director of training E. Learing center learning standards officer F. Learning center JDTA coordinator G. Stake holders
answer
A. Naval Education Training Command B. NETC N7 C. Learning center commmanding officer: Ensures compliance with NETC policy and guidence, signs forward the JDTA report to requirement sponsor D. Learning center director of training: Provide oversight, assign coordinator, review & forward reports E. Learing center learning standards officer: Provide JDTA guidence & review messages F. Learning center JDTA coordinator: Drafts annoucement, adend, completion Reports messages, Oversee, Liaison, maintains document, in-puts documents onto NKO JDTA Community of Practice. G. Stake holders: All members are stake holders.
question
.3 State the roles and responsibilities of the requirement sponsor prior to and after the completion of a JDTA.
answer
See Matrix
question
.4 List the external triggers to perform a JDTA.
answer
The external triggers: Navy Training System Plan(NTSP), Operational Risk Management(ORM), Fleet performance assessment, Direct fleet input, HPRR.
question
.5 List the internal triggers to perform a JDTA.
answer
The internal triggers: Revision to enlisted occupational standards(OCCSTDS), Rating merger, Establishment or revision of an NEC.
question
.6 Explain a targeted JDTA.
answer
Targeted JDTA: Insufficient course data exists to support a HPRR, a mishap, as directed by higher authority.
question
.7 Explain the triggers that may cause a targeted JDTA..
answer
Look at specific tasks
question
.8 Explain the hiearchial structure of work.
answer
Occupation"made up of many job", Job"made of many duties", Duties"made up of many tasks", Tasks"made up of many sub-tasks", sub-tasks"made up of many steps", Steps.
question
.9 Explain the perparation of a JDTA to include: A. Coordinator B. Messages C. Documents D. Stakeholders E. Community of Practice F. Post JDTA
answer
A. Coordinator: leads the process B. Messages: Annoucement message, JDTA, agenda message, completion C. Documents D. Stakeholders E. Community of Practice F. Post JDTA
question
.10 Explain where the non-slected for formal training E-4 and below Occupational Standards are to be trained.
answer
This training occurs On-board training(OBT), On-the-job training(OJT)
question
What does JDTA establish?
answer
Job Duty Task Analysis establishes occupational standards, and a list of work to be referred to for curriculum development.
question
Steps in JDTA
answer
Occupation, Job, Duties, Task, Subtask, step
question
107.1 State the purpose of a Front End Analysis(FEA)
answer
It is a defendable and repeatable process for determining methods/ways of training.
question
.2 When is a FEA performed
answer
Perform as soon as JDTA is completed.
question
.3 List the triggers of FEA
answer
Revision to fleet requirement, Revision to OCCSTDS, New equipment, fleet feedback, FCR, Establishment or disestablishment of NEC, rating merger, as directed by CCA, HPRR.
question
.4 Explaing the documentation of the FEA as detailed on the FEA template
answer
FEA template will help you standardize requesting authority, requesting command, start and end dates, documents from existing courses, new training requirements, training gaps, training delivery methods.
question
.5 Identify who determins what curriculum development model will be used for curriculum modications with your learning environment.
answer
The Curriculum Control Authority(CCA).
question
.6 Explain the approval process of the finalized FEA.
answer
Requirement sponsor (the fleet) approval will be forwarded with the FEA to the CCA for final approval.
question
Who decides wahat is to be taught?
answer
The Fleet decides what is to be taught.
question
When is FEA completed?
answer
It is completed after JDTA and before Curriculum Development.
question
What causes or gives a need for FEA?
answer
Triggers
question
Typically, who is the Curriculum Control Authority (CCA)
answer
The Commanding Officer
question
What is the purpose of Human Performance Requirement Review (HPRR)?
answer
HPRR is used to identify problems and re-validate training.
question
What is the purpose of the Course Training Task List (CTTL)?
answer
It is a list of knowledge and skills (learning objectives) for a particular course.
question
What does E2E stand for?
answer
End to End
question
What makes a good oral question?
answer
FADS: Focus attention, Arrouses interest, Drills subject matter, and Stimulates thought.
question
What are the delivery methods?
answer
Lesson(most typical in Navy, due to amount of questions), lecture (causes no interaction), lecture with audio-visual, Role playing, Team dimensional, Gaming simulation, Discussion demostration.
question
What is the publication for Front End Analysis?
answer
NETCINST 1500.6
question
what are the three curriculm development models?
answer
1. Task based 2.PPE (personal performance profile) 3. ILE, Integrated Learning Environment. The CCA, (aka the CO) will decide which one will be used.
question
What is the Business Case Analysis publication (BCA)
answer
NETCINST 1510.3
question
108.1 What is the purpose of the Business Case Analysis(BCA)
answer
It is a structured method of making decisions.
question
.2 Explain the purpose of excutive summary or Business Case Analysis
answer
It is the key high lights.
question
.3 Describe how strategic alignment is important to a BCA
answer
The process compares alternatives based on how they meet the organizations values.
question
.4 Explain what analysis of alternatives does?
answer
It is a list of pros and cons of your options.
question
.5 Discuss risk assessment in decision making of BCA
answer
The risk assessment minimizes risk in the alternatives.
question
.6 Explain how cost benfit impacts a BCA
answer
Considering the cost in relation to the benefit of each alternative.
question
.7 Explain the final stages of BCA:
answer
1. Conclusions and recommedations, summerizing what was chosen. 2. Implementation strategy, explain the plan. 3. Review and approval, the CCA authorizes.
question
What is the publication for Training Project Plan(TPP)?
answer
NAVEDTRA 130, 131, 136
question
109.1 State the purpose of a Training Project Plan(TPP)
answer
The blue print of how to build a course, it has a plan of action (POA&M), which has a list a dates.
question
.2 Who has initial approval authority of a TPP?
answer
CCA
question
.3 For the below events, who approves implementation of a TPP? A. submitted to NETC per triggered event with zero sum gain.
answer
Zero sum is approved by NETC N7.
question
.3 For the below events, who approves implementation of a TPP? B. submitted to NETC requiring additional resources or offsets.
answer
Addition for off-sets need to be approved by OPNAV.
question
.4 View a TPP and explain the contents of a TPP: (memorize these in order)
answer
A. curriculum Control Authority(CCA) TPP endorsement letter. B. Cover page C. Course data D. Justification E. Safety Riske and Hazardous materials F. Curriculum development method G. Resource requirements H. Compensation I. Milestones
question
.5 Describe the web application SERENA (validity pending)
answer
Application allows learning centers to upload, maintain, and manage TPP. It allows the flow of a TPP from initial submission to final approval or suspense of the TPP.
question
.6 Describe the type of TPPs housed in SERENA (validity pending)
answer
All are house in SERENA
question
.7 Explain how TPPs are identified and maintained in SERENA. (validity pending)
answer
They are serialized chronologically by submission and each rate has they're own set referenced to the serialized whole.
question
Who aproves implementation?
answer
Initially the CCA approves it.
question
What is the process of approving curriculum
answer
JDTA(Job Duty Task Analysis) 'what to train'. FEA (Front End Analysis) repeatable/ defendable way of determing 'how best to conduct training'. BCA (Business Case Analysis) structured way of making decisions. CD (Curriculum Development), three ways: task based, PPP based, ILE.
question
What is the purpose of Task based curriculum
answer
Training Navy personnel on non-pipe line courses.
question
What is the purpose of Personnel Performance Profile
answer
Training Navy personnel on pipe line courses.
question
What is an SME
answer
Subject Mater Expert.
question
What is the publication for Task Based CurriculumDevelopment Manual
answer
NAVEDTRA 130A. It has phases, the pilot occurs on tail end of the development phase, uses AIM 2 software
question
What are high points of Personal Performance Profile PPP
answer
NAVEDTRA 131A. It has stages: pre-stage, stages 1-5, post stage, PADDPIE: Plan, analyze, Design, Develop, Pilot, Implement, Evaluate. Uses AIM 1
question
110.1.1 What is the publication for Task based curriculum development
answer
NAVEDTRA 130
question
.2 Discuss the items developed in Plan Phase of Task-Based Curriculum development
answer
Outcome is the training project plan (TPP) Has POA&M.
question
.3 Discuss the items developed in Analyze phase
answer
Outcome is course training task list(CTTL) a list of Eos and Tos not necessarly in order.
question
.4 Discuss the items developed in Design Phase
answer
The PRELIMINARY Training Course Control Document(TCCD) is developed in this phase.
question
.5 Describe what is required of a skill and knowledge learning objective
answer
Knowledge and skill
question
.6 Discuss the items developed in develop phase
answer
The outcome is the Lesson Plan(LP), Tranee Guide (TG), Tests and other supporting material Instructional Multi Media (IMM).
question
.7 Discuss the purpose of the Implementation phase
answer
This phase identifies the Red Line changes, which are mistakes in curriculum. This phase ends with Curriculum Control Authority(CCA) writing a Letter of Probagation(LOP) on Command Letter Head.
question
.8 Discuss the purpose of the Evaluate phase
answer
This phase is internal and external to the school house. Internal addresses: Grades, Student eval, Instructional, FCR Formal Course Review, Course survalance. External addresses: Fleet surveys, Direct Communication, Human Performance Requirement Review(HPRR).
question
What is CDP?
answer
Course Data Processing, which are unique for each location of a course.
question
110.2.1 What is the publication for PPP curriculum development
answer
NAVEDTRA 131
question
.2Describe and discuss the 7 stages involved in developing materials for Personal Performance Profile(PPP) curriculum
answer
Personal Performance Profile is associated with pipe-line schools. Prestage: AKA the Planning stage, and the outcome is the Training Project Plan(TPP). Stage I/ Analyze: Outcome is Personal Performance Profile table list, which will include a new and modified PPP tables, and there will be a PPP for every objective. This stage will also include the Training Path System(TPS). Stage II/Design: Outcome is the PRELIMINARY Training Course Control Document(TCCD). Stage III/Develop: Outcome are the Lesson Plan(LP), Training Guide(TG), tests and other support material. Stage IV/Pilot: Pilot course monitoring report- Two monitors: one who monitors the time and the other monitors content, red line changes are made for what material should be fixed in the curriculum, the curriculum becomes smooth when the red line changes are corrected. Implement stage: Curriculum Control Authority(CCA) writes a Letter Of Promulgation(LOP). Post stage: Evaluate(internal & external evaluation).
question
.3 Discuss the products of Training Path System(TPS) stage 1
answer
This is a management tool that designates that training requirements for personnel involved in a particular training program. Assigns Task Sets(who will be trained)-coordinators, directors, and performers. Assigns Training Objective Statements(TOS)-Describes knowledge and skills to be learned, and level that the student is trained. Assigns Training Level Assignments(TLA)-Lists speciic Personal Performance Profiles(PPP) items to be taught. Assigns Table Assignment Matrix(TAM)-Summerizes the training requirements for all of the Personal Performance Profiles(PPP)Tables. Assigns Training Path Chart(TPC)which is a graphic of the pipe-line of courses.
question
.4 State and discuss Training Objective Statement(TOS) codes for both knowledge and skills
answer
This describes knowledge and skills to be learned and to what level. 1. Knowledge Category(K): Equipment/System/Subsystem: T=Theory, F=Familiarization, Task Function: Q=Knowledge, Background(B): B=knowledge. 2. Skill Category(S): Equipment/System/Subsystem: O=Operation, P=Preventitive Maint, C=Corrective Maint, M=Maintenance. Task Function: J=Skill, Background(B): S=Skill. Levels of training: 0=background, 1=normal, 2=abnormal, 3=abnormal without pubs, 4=emergency.
question
.5 Define the three Task Sets
answer
Coordinator task set(officer), Director task set(chiefs), Performer task set(E6 and below): tech operator
question
.6 Discuss the types of courses listed in a Training Path Chart (TPC)
answer
All of these courses will be schools that are assigned or part of a particular pipe-line. B=background, R=replacement, C=conversion, A=advanced, O=on-board.
question
.7 Identify when job sheet development should begin in the Instructional Systems Design (ISD) process
answer
It should begin as soon as TPS is done.
question
.8 What are the triggers and process for converting Personal Performance Profile(PPP) based curriculum to Task based curriculum
answer
The course is no longer in the pipe-line course, and must be redeveloped in Task Based.
question
What are the 'NAMES' of the stages in PPP?
answer
Pre, 1-5 stages, and Post
question
Define Personal Performance Profile(PPP)
answer
A minimum listing of knowledge and skills required to operate and maintain a system, subsystem, or equipment, or to perform a task or function.
question
What is the overal purpose of Personal Performance Profile Curriculum Development (PPP)
answer
It is associated with pipe-line schools
question
What are the high points of Personal Performance Profile (PPP)
answer
Uses AIM1, it has STAGES (Pre, stage1-5, Post), has a pilot stage, uses PADDPIE accronym
question
What are the seven stages of PPP
answer
1)Prestage/ Planning: Outcome is the Training Project Plan (TPP),2) Stage I/Analyze: Outcome is the PPP table list, new and modified PPP tables, and Training Path System(TPS). There will also be a PPP for every objective. 3) Stage II/ Design: Outcome is the preliminary TCCD. 4)Stage III/Development: Outcome is the Lesson Plan, Training Guide, Test and other support elements. 5)Stage IV/Pilot: Pilot course monitoring report, Two instructors will be observing the pilot: one for the time, and another for the curriculum. 'Red line' items will be identified in this stage, and the red lined items will be fixed when the curriculum becomes 'smooth'. 6) Implement: CCA (LOP) letter of Probagation. 7)Post stage: Evaluate, Internal and external methods.
question
How are the volumes of NAVEDTRA 131 divided up into? Volumes of what?
answer
Vol I: Developers guide, it also has a supplement. Vol II: Sample products. Vol III: Managers guide.
question
110.3.1 Integrated Learning Environment(ILE) What instruction is used for ILE?
answer
NAVEDTRA 136
question
.2 List the three types of training materials provided by the ILE
answer
1) Instructor Led Training(ILT) 2)Interactive Multimedia Instruction (IMI) 3)Blended
question
.3 Discuss the seven phases utilized to develop a course within the ILE
answer
Plan, Analyze, Design, Develop, Implement, Evaluate, Life Cycle Maintenance.
question
.4 Discuss the outcome of the Instructional Media Design Package (IMDP) during the design phase
answer
Detail and demonstrate the design intent for each module and lesson within a course and to describe how the course will achieve the intended learning. Similar to story-boarding for a video game or movie.
question
.5 Discuss the three variation of the course hierarchy which can be developed within the ILE
answer
1) Instructor Led training (ILT) 2) (IMI) Module Navy E-Learning Learning Management System (NeL-LMS) delivered 3) ILT, and Lesson IMI module Nel-LMS delivery
question
What are the four principles of SCORM(subject content object reference model)
answer
(RIDA) Reuse, Interoperable, Durable, Accessible.
question
What are the building blocks of ILE?
answer
They are modules and they built around learning objectives.
question
What does NCOM stand for and what is it used for?
answer
Navy Content Object Model, and the three R's are used: Reuse, Repurpose, Reference
question
What is Metadata?
answer
It is huge quantity of data and uses tags to search for data. Reuse and repurpose modules.
question
What are the content types of Enabling Objectives?
answer
Facts: Provable knowledge, Concept: Idea or group of ideas, Procedure: Step by step process (IE: 3M), Process: system at work (IE: cardiovacular system), Principle: Guide lines
question
What does LMS stand for
answer
Learning Management System
question
110.4.1 Common Elements
answer
...
question
.2 Dicuss the purpose of Instructional Media Materials(IMM)
answer
RUUIM: Increase: Retention, Understanding, Uniformity 'from instructor to instructor', Interest, Motivation.
question
.3 List the minimum sections of a Lesson Plan
answer
1. Front Matter: Cover page, title page, list of effective page, Letter Of Probagation(LOP), change records page, table of content, secuity awareness notice page, safety/ hazard awareness notice page, how to use lesson plan, allocation of instructional time, couse 2. Lesson Topics: Topic page, Discussion Demonstration Activity(DDA), Disscussion Points(DP)-Related Instrutor Activity(RIA) 3. Reference Materials (optional): Resourses Requirement List(RRL), Profile item-to-topic Objecive Assignment Chart(OAC), Fault Applicability List(FAL)
question
.4 List the minimum sections of a Trainee Guide
answer
Front matter and Instructional sheet
question
.5 State the purpose of Course Training Task List(CTTL)
answer
List all skills and knowledge/ learning objectives (EO TO)
question
.6 Discuss what a CTTL gives the curriculum developer: Job, Duty, Task, Learning Objectives.
answer
JDTA gives the building blocks, and those building blocks take the form of a list of learning objectives
question
.7 State the purpose of testing
answer
It insures the student grasps the learning objectives.
question
.8 Explain the purpose to pilot a course.
answer
Make sure the course works, or validates the course.
question
.9 List and discuss the triggers for developing, Revising, or canceling a course.
answer
Addition of new training course, Revision to a training course that changes the instructional strategy or delivery method, or course length, increases resource requirements. Deletion of a training course, Transfer of a training course between CCAs, Addition or deletion of a training course (courses data processing CDP)
question
.10 State the difference between the Course Mission Statement(CMS) and Terminal Objective (TO)
answer
CMS: what the course will do for the fleet. TO: What the student will be able to do at the end of the course.
question
.11 Spell out the full term for the following abbreviation/acronyms: LP, DDA page, TO, EO, DP, RIA, IMM/VI
answer
LP: lesson Plan DDA: Discussion Demostration Avtivity TO: Terminal Objective EO: Enabling Objective DP: Discussion Point RIA: Related Instrcutor Activity IMM/VI: Instructional Media Material/Visual Information.
question
.12 Discuss where to find the procedures for handling and storing classified training materials.
answer
It is all found in OPNAVINST 5510.1
question
.13 What documents are contained in the final Training Course Control Document (TCCD)
answer
Front Matter, Curriculum outline of instruction, and annexes.
question
.14 What annexes are included in the final Training Course Control Document (TCCD)
answer
Resourse Requirements Lists, Course Master Schedule.
question
.15 What is contained in a Resourse Requirement List (RRL)
answer
All materials, facilities, man-power, funding needed to conduct training.
question
What are high points of Integrated Learning Environment(ILE)
answer
It has phases, PADDIEL: Plan, Analyze, Design, develop, Implement, Evaluate, Life cylce maintenance. Life cycle maintenance: up dating software or hardware.
question
What are the volumues in Content development
answer
Vol I:Developers guide, vol II: Sample products, vol III: Managers guide
question
What are the 6 phases
answer
Plan, Analyze, Design, Develop, Impliment, Evaluate
question
Trining Project Plan (TPP)
answer
Most important in (POA&M) which includes dates and time
question
CTTL
answer
Course Training Task List, which is a list of EO and TO
question
TCCD
answer
Training Course Control Document.
question
What does the TCCD include?
answer
Includes: front matter, curriculum outline of instruction: must be in sequence, list of EO and TO, and Annexes
question
What are the elements of a lesson plan?
answer
Front Matter, Lesson topics, Reference Materials(optional)
question
What is included in front matter?
answer
Front Matter: Cover page, title page, list of effective page, letter of promulgation, change records page, table of content, secuity awareness notice page, safety/ hazard awareness notice page, how to use lesson plan, allocation of instructional time, couse master schedule, course learning objectives page.
question
What is included in lesson topics?
answer
Topic page, dicussion of demonstration Activity (DDA), Discussion Point (DP) related instructor activity (RIA)
question
What is included in Reference Materials?
answer
Resourses Requiements List (RRL), Profile item-to-topic Objective Assignment Chart(OAC), Fault Applicability List(FAL)
question
What are the 6 types of instructional sheets?
answer
OJPAID: Outline, Job, Problem, Assignment, Information, Diagram.
question
What are the 8 ways of sequence a Curriculum Outline of Instruction(COI)
answer
Job performance order, chronological order, critical sequence, simple to complex, comparative sequence, relationship to like COI elements, principle of reverse sequence, combination approach. The order will be dictated by what ever makes sense to the number of students you have.
question
COI vs COP
answer
Community Of Interest and Community of Practice.
question
What is the contained in a Resourse Requirement List(RRL)
answer
Man-power, facilities, IMM, and Support material.
question
What are the Annexes that are added to the final TCCD?
answer
Resource Requirement List(RRL) and Course Master Schedule(CMS)
question
what are the names of the stages ins Personal Performance Profile(PPP)?
answer
Pre, 1-5 stages, and Post
question
What is the content of the Training Project Plan(TPP)?
answer
Cover page, Table of Content, Justification, Empact: what will happen if course is not develped, Course Data Page(CDP), Safety Risk and Hazard materials exposure, Curriculum development method used, milestones, Resourse Requirements.
question
What is the most critical element of PPP curriculum development?
answer
PPP! Because they are required in: Training Path System(TPS), EO's and TO's, Test items, Lesson Plan (LP), and Training Guides(TG), Support material.
question
State and discuss the Trainging Path System (TPS) outputs
answer
1)Management: tool that desiginates the training requirements for personnel involed in a particular training program. 2)Tasks sets (who will be trained) that coordinates, directs, and lists the performers. 4)Training Objective Statements(TOS): discribes knowledge and skills to be learned. 5)Table Assignment Matrix(TAM): summerizes the training requirements for each of the PPP. 6) Training Path Chart(TPC): a graphic that out lines the pipe line of the program.
question
What is the purpose of the Training Objective Statement(TOS)?
answer
Describe the knowledge and skills to be learned, and the level to be trained.
question
What are the accounting codes in Training Path System(TPS)
answer
R= Replacement, A=Advanced, B=Both
question
What is another name of a part number?
answer
Learning Objective/ lesson.
question
What are the number designation in Training Path System(TPS)?
answer
0= Background, 1= Normal, 2= Abnormal, 3= Abnormal without Pubs. 4= Emergency
question
What are the types of courses in the Training Path Code(TPC)?
answer
B=Background, R=Replacement, C=Conversion, A=Advanced, O=Onboard
question
List and describe the contents of a the preliminary Training Course Control Document(TCCD)
answer
1) Profile item-to-topic Object Assignment Chart(OAC) 2)Resourse Requirement List(RRL), this is a list of all material needed to conduct training 3) Curriculum Outline of Instruction(COI) Sequence COI, which ever way makes the most sense for the number of students and the time alloted.
question
What is the purpose fo TCCD?
answer
Governs how the course will be controlled until the course is retired.
question
How is the Course Master Schedule (CMS) organized?
answer
By time periods (50mins of instruction and 10min of break).
question
What does DDA stand for?
answer
Discuss Demonstration Activity
question
What does RIA stand for?
answer
Related Instructor Activity
question
What does DP stand for?
answer
Discussion Point
question
What are the six types of Instructional Sheets?
answer
1. Outline 2. Problem 3. Job Sheet 4. Assignment Sheet 5. Information 6. Diagram
question
What are the task sets?
answer
Performer, Coordinator, Director task sets.
question
When is the job sheet developed?
answer
It begins as soon as the TPA is completed
question
What does COI stand for?
answer
Course outline of Instruction
question
What is the purpose of the pilot course?
answer
It validates the course to identify if the course will work for it's intended purpose.
question
111.1 State the purpose of a testing program?
answer
To validate if students are learning the Learning Objectives
question
.2 State the roles and responsibilities of the following for an effective tessting program.
answer
See Matrix
question
.3 State the primary course sourse data for creating test items.
answer
The primary data for creating test items: JDTA, OCCSTDS(civilian term), CTTL/PPP table, COI(Curriculum outline of instruction), Training Guide in develop stage in PPP.
question
.4 List usable course source data to be used when the primary course source datat is not available or has not been created.
answer
Ask Subject Matter Expert(SME) and check within the Pubs.
question
.5 Define the following test: a. Formal b. Informal
answer
A. Formal: Performance counts towards a grade. B. Informal: Does not count towards grade.
question
.6 For the below items, define the three levels of proficiency levels contained within each: a. Skill b. Knowledge
answer
Skill(Level 1: Imitation, Level 2: Repetition, Level 3: Habbit) Knowledge (Level 1: Knowledge Comprehension Level 2: Application and Analysis Level 3: Synthesis and Evaluation.)
question
.7 List the five categories for performance and knowledge tests.
answer
Quiz, Pretest, Oral, Performance or Progress test, and Comprehensive.
question
.8 Discuss the process of piloting a test.
answer
The test material will be reviewed by Subject Matter Expert(SME) taking into account all versions, The Course Curriculum Model Manager (CCMM) will forward test to Learning Standards Officer(LSO), Then students will take the test.
question
.9 Describe the use of each test instrument as they relate to knowledge and performance tests.
answer
A. Job Sheet: Step by step performance, B. Assignment sheet: Home work C. Multiple choice: Testing recognition, D. True or False: Two answer testing, E. Matching: Connecting words or phasing, F. Labeling: Testing recall, G. Essay: Written response, H. Case Study: Testing and understand of complex issues, I. Validation of Tesing Instruments: Organizing and assembling testing content.
question
.10 What are two types of testing methods used in testing?
answer
Criterion-Reference test: 90+= A, 80+= B etc . Normal-Reference Test: graded on a curve
question
.11 Discuss test failure policies and associated grading criteria with your leaning environment.
answer
If a test is failed <70%, the student is re-trained, and re-tested.
question
.12 Discuss during performance test desig how the skill learning objective criticality is determined.
answer
It is graded on a criticality scale. 3=high, 2=moderate, 1=low
question
.13 Discuss during knowledge test design how the knowledge learning objective criticality is determined to perform a tak.
answer
It is graded on a scale. 3=high criticallity, 2=moderate, 1=low
question
.14 Identify the ten sections of a testing plan.
answer
1) course data. 2) course roles and responsibilities. 3) Course waivers. 4) Test development. 5) Test administration. 6) Course test and test types. 7) Grading criteria. 8) Remediation. 9) Test and test item analysis: validating the test. 10) Documentation.
question
.15 State the purpose of test item analysis.
answer
Validate test items.
question
.16 In a remediation program, discuss what the primary and secondary goal is.
answer
The primary goal: To motivate the student. The secondary goal: Find the root cause of the problem and help the student get passed it.
question
.17 Dicuss the three methods of remediation available to instructors.
answer
Targeted: Focuses on particular areas of the curriculum. Scalable: Cover all material again. Iterative: Repeat one particular aspect again, and again, and again...
question
.18 Define the following sections of a remediation program: A: Retest B: Set-back C: Drop from training and attrites D: Couseling E: Academic Review Boards(ARBs)
answer
A. Retest: No earlier than 24 hours and students will recieve a minimum passing grade. B. Set-back: ASMOed here at RTC C. Drop from training and attrites: sent to the fleet or home. D.. Couseling: Remediation E: Academic Review Boards(ARBs): Used to find the problem facing the student. Personnel involved with board: Student, Instructor, Learning Standards Officer(curriculum), Division Officer, Course Supervisor, TSC. Items brought to ARB: Student notes, grades, training guide, instructor guide, questioneer(open ended questions used to indentify the problem). Out come of board: Continue training, ASMO, Drop, Remediation by student, instructor, course supervisor.
question
112.1 What role does Naval Education and Training Professional Development and Technology Center(NETPDTC) serve to the PQS program
answer
The role of NETPDTC in Pensicola FL maintains and ensures the standards are kept for all PQS on line.
question
.2 Identify the location where PQS are maintained and available for fleet use.
answer
All are available on Navy Knowledge On-line(NKO) in the Navy PQS portal.
question
.3 Explain the function of PQS?
answer
The function of PQS: Basic rquirements, minimum skills and knowledge to complete the duties(which are a level of task)
question
.4 Explain the process for an individual qualified on a PQS and the PQS in superseded by a revision, what happens to the individuals qualification and what must that individual do with the revised PQS?
answer
PQS must be completed again or individual changed line items, can be learned and tested.
question
.5 In formal training courses where PQS lines may be signed, describe the procedure to inform a reciveing command which line items have been completed and signed.
answer
Student will be issued a page 13.
question
.6 Explain the difference between a PQS and Job Qualification Requirement(JQR)
answer
The difference between PQS and JQR: PQS is for multiple platforms(Ships) JQR: are designed for a single platform. The JQR will mirror a PQS, but have specifics for that platform.
question
What instruction is associated with Utilization of Enlisted Occupational Standards for Training and Career Development.
answer
OPNAVINST 1500.74(non resident training courses NRTC)
question
113.1 What role does Naval Education and Training Professional Development and Technology Center(NETPDTC) serve to NRTCs?
answer
The role of NETPDTC is to: control availability, track all grades(in CETARS), house material(then put it in NSIPS). They work out of Pensacola FL.
question
.2 What is the primary purpose of NRTC?
answer
The primary purpose of NETPDTC: Aids in self study, helps people with rate information giving them technical information, it is the primary source for rating exam, key information needed for rate and test knowledge. Also helps with cross training.
question
.3 What impact does a NRTC have in the rating exam process?
answer
NRTC is the primary source documents for rating exam questions.
question
.4 Identify the location where NRTCs are maintained and available for fleet use
answer
NRTC are housed and maintained on the non-resident training course NRTC website.
question
.5 NRTC is designated for revision or development, state the functionality of the following: A. Contracting Office Representative(COR) B.Statement of Work(SOW) C.Naval Logistics Library(NLL) D. Defense Automated Printing System(DAPS)
answer
A. Contracting Office Representative(COR): Liasion between NETPDTC and the learning center. B.Statement of Work(SOW): Outline for work done on NRTC by contractors. C.Naval Logistics Library(NLL): Central point of all NRTC assigned stock numbers, tracked within the supply system D. Defense Automated Printing System(DAPS): Makes documents for Naval Logistics Library(NLL)
question
.6 NRTSs are assigning points, for whom are these points calculated and how does it benefit these personnel?
answer
Points are given to reservist and count towards retirement, evaluation and advancement.
question
What instruction is associated with the Naval Training System Requirements, Acquistion, and Management
answer
OPNAVINST 1500.76
question
What instruction is associated with Training Transfer Agreement?
answer
OPNAVNOTE 1500
question
114.1 What does Naval Training Systems Requirements, Acquistion, and Management provide?
answer
It provides (MPT) manpower, personnel, training for acquistion systems(new equipement)
question
.2 What document is prepared for traceability in support of new and or modernized Naval capabilities?
answer
Navy Training System Plan(NTSP)
question
.3 What is the purpose of a Naval Training System Plan(NTSP)?
answer
It is used to identify manpower, personnel training gaps to support new acquistion and or modernization programs.
question
.4 How many Acquistion Categories(ACAT) does the NTSP process govern?
answer
ACAT I(this is the biggest), II, III, IV
question
.5 List and describe the five gates/thresholds for NTSP submittal?
answer
6 years prior to Initial Operational Capability(IOC) military construction(MILCON). 3 years prior to IOC, TD=Training Device-research, development, test, eval(RDT&E). 3 years prior to IOC for a Major Defense acquition program (ACT1 or ACAT2) or for major system follow on training Devices(TD). Prior to initial operational test and evaluation(IOT&E) operational eval, this is if you already have a facility. 3 months prior to IOC for rapid acquisition programs such as NDI, Commercial Off The Shelf(COTS), RDC, AAP, and JUON programs???
question
.6 Discuss the process and artifacts required for a course to transition from the acquistion community to formal as delineated in the Traning Transfer Agreement?
answer
Training Transfer Agreement: Governs the process of hand-over from people who built the training facility to the Navy personnel who will use it to train.
question
.7 Explain the roles and responsibilities for each
answer
See Matrix
question
What instruction is associated with Impaired Training and Education Report Policy and Reporting Procedures?
answer
NETCINST 1540.1
question
What instruction is associated with Missed Training Opportunity Reporting Policy and Procedure?
answer
NETCINST 1500.7
question
115.1 State the purpose of Impaired Training and Eduction Report(ITER) Policy and Reporting Procedures.
answer
The purpose is to report reduced or stopped training.
question
.2 List the N codes within NETC that the Learning Center Shall Address.
answer
N1: Total force manpower N4: Facilities N6: Chief information officer(serious computer people) N7: Learning and Development(NETC) N8: Resourse, Requirement and Assessments.
question
.3 State who will draft the NETC response for ITERs.***
answer
NETC TPC.
question
.4 Explain ITER conditions Red and Yellow.
answer
Red: Stop training Yellow: Inhibits training
question
.5 List the six ITER types
answer
Found in instruction 1540.1B(PACEFC): Personnel, Equipment, Facilities, Curricula, Ammunition, Correction
question
.6 List three ITER categories
answer
The three catagories are: Initial, Update, COR=Correction
question
.7 Define a Missed Training Opportunity(MTO)
answer
Loss of a course quota by a command.
question
.8 List five examples of a MTO
answer
1. Command has a quota for a student that doesn't show up and command doesn't give a replacement. 2. Command cancels a granted quota in four or fewer working days prior to a courses convening without providing a replacement. 3. Student cannot obtain credit for the course of instruction due to the command recall of the student. 4. Student is absent from a course. 5. Student is recalled by command.
question
.9 Who has the responsibility to report a MTO
answer
Training Support Command(TSC)/ Training Support Detachment (TSD) will submit Missed Training Opportunity(MTO) reports via naval message with each command that created an MTO listed as an action addressee and each command's ISIC, TYCOM and NETC listed as an information addressee.
question
.10 How often is the MTO data gathered and in what format is the data sent.
answer
MTO reports go out weekly, via Navy messages.
question
.11 Explain the purpose of Casualty Reporting(CASREP)
answer
Anything that breaks that impacts the mission is a CASREP. A CASREP (NWP1-03.1) reports the casualities results in operational commanders and support personnel being advised of the status of significant equipment malfunctions which may result in the degradation of unit readiness.
question
.12 Explain the use of each of the following: A. Initial CASREP B.Update CASREP C.Correction CASREP D. Cancellation CASREP
answer
A. Initial CASREP: "Hey, something broke" B.Update CASREP: "Hey, it's still broke, but we're still working on it." C.Correction CASREP: "Hey, we fixed it!". D. Cancellation CASREP: "Don't bother, we're going in for an overhaul."
question
201.1 Describe the purpose of Authoring Instructional Materials(AIM)
answer
AIM is computer based curriculum authoring tool devolped by navy.
question
.2 Identify the approach AIM utilizes to develop and maintain training materials?
answer
It is question and template driven to support standard phases or stages of curriculum development.
question
.3 Discuss how AIM ensures training materials are developed and revised per prescribed specifications and guidelines.
answer
The system is automated to conform to standards (NAVEDTRA 130A/ 131A, ILE), resulting in efficient, cost effective development and maintenance of curriculum.
question
.4 Discuss which AIM tool supports the following: a. Task based curriculum development, b. PPP based curriculum.
answer
A. AIM II: Doesn't have charts and tables and is used for tasked based. B. AIM I: Uses charts and tables and is used for PPP based curriculum development.
question
202.1 State the purpose of the Content Planning Module (CPM)
answer
The Content Planning Module(CPM) is used for Tasked Based, PPP, and ILE. CPM takes validated JDTA and makes Learning Objectives. Side note: CPM is found on the AIM website.
question
.2 Name the four primary areas with CPM.
answer
Home area, JDTA, Reports, Projects
question
.3 Identify the primary input and discuss the use of CPM.
answer
Validated JDTA
question
203.1 Discuss and describe the forms of training methods ILE supports.
answer
Instructor-led, Facilitated, and computer-based(CBT).
question
.2 Discuss what Navy E-learning provides to its customers.
answer
It provides training anytime, anywhere in the world. DoD, active duty, civilians, contractors, retirees and active duty dependents are also eligible to use this service.
question
.3 Describe the training received through Navy E-learning with the ILE.
answer
The training can be formal, Informal, or GMT or Navy Military Training(NMT).
question
.4 Dicuss the tweleve content processing phases.
answer
1. Announced 2. Submitted 3. Received 4. Returned 5. Navy E-learn 6. Sponsor review 7.Approved(in action) 8. On hold 9. Hosted 10. Hosted: A-school 11. Hosted: Non-standard 12. Retired
question
.5 Discuss Government Content Acceptance Testing(GCAT)
answer
GCAT is the process of SME within the Navy E-learn testing a course to ensure the functionality of the course prior to the course becoming active.
question
204.1 Explain the functionality of: A. CeTARSii menue B. CeTARS monitor C. Discoverer Plus.
answer
A. CeTARSii menue: Data entry for a course or training. B. CeTARS monitor: Allows view of aggregated data, Quality Assurance, Metrics. C. Discoverer Plus: Makes lists from data in CeTARS.
question
.2 Explaing the funtionality of CANTRAC.
answer
The functionality of CANTRAC has two list: Vol I-Facilities Vol II: Courses
question
.3 Explain what a Training Officer or Sailor can do in ENTRS.
answer
ENTRS is used to reserve a seat for students in a class.
question
.4 In CANTRAC, what functionality portion of CeTARS is where course data is initially input and updated this data is automatically updated in CANTRAC?
answer
Discoverer.
question
.5 What funtional area of CeTARS is where Course Identification Numbers(CIN), Student and other pertinent course data(ie Course Data Processing (CDP), Planned Activity (PA), etc..., a learning Center has can be found.
answer
CeTARS menu 2 (CeTARSii).
question
.6 Data gathered in CeTARS can be exported in what format(s)?
answer
The data can be in Excel, Work, or PDF.
question
AIM
answer
Authoring Instructional Materials
question
ARB
answer
Academic Review Board
question
BCA
answer
Business Case Analysis
question
CANTRAC
answer
Catalong of Navy Training Courses
question
CeTARS
answer
Corporate enterprise and Training Activity Resource System
question
CBT
answer
Computer Based Training
question
CCA
answer
Curriculum Control Authority
question
CCMM
answer
Course Curriculum Model Manager
question
CMS
answer
Course Mater Schedule
question
COI
answer
Curriculum Outline Instruction: It is in order where as Course Training Task List is not in order.
question
CPM
answer
Content Planning Module
question
CTTL
answer
Course Training Task List
question
DONI
answer
Department of Navy Issuance
question
DOR
answer
Drop On Request
question
EAP
answer
Emergency Action Plan
question
ENTRS
answer
Enterprise Naval Training Reservation System
question
EO
answer
Enabling Objectives
question
FEA
answer
Front End Analysis
question
FCR
answer
Formal Course Review
question
GCAT
answer
Government Content Acceptance Testing
question
HPRR
answer
Human Performance Requirement Review
question
IDP
answer
Individual Learning Environment
question
ILT
answer
Instructor Led Training
question
IMI
answer
Interactive Multi Media Instruction
question
IMM
answer
Instructional Media Material
question
JDTA
answer
Job Duty Task Analysis
question
JIT
answer
Journeyman Instructor Training
question
LCMS
answer
Learning Content Management System
question
LMS
answer
Learning Management System
question
LP
answer
Lesson Plan
question
MOE
answer
Measurement of Effectiveness
question
MOP
answer
Measurement Of Performance
question
MTS
answer
Master Training Specialist
question
NRTC
answer
Non Resident Training Course
question
OCCSTDS
answer
Occupational Standards
question
ORM
answer
Operational Risk Management
question
PPP
answer
Personnel Performance Profile
question
PQS
answer
Personnel Qualification Standards
question
R3
answer
Reuse, Repurpose, Reference
question
RRL
answer
Resource Requirment List: Contains everything to conduct training, which are in the annexes.
question
SCORM
answer
Sharable Content Object Reference Model
question
SOH
answer
Safety and Occupational Health
question
TCCD
answer
Training Course Control Document: Governing document for the life of the course. Front matter, COI, Annexes.
question
TG
answer
Training Guide: Contains Front matter and Instructional Sheet: Outline, Job, Problem, Assignment, Information, Diagram Sheets.
question
TO
answer
Terminal Objective
question
TOS
answer
Training Objective Statement: Knowledge and Skills and the levels you are training your students.
question
TPC
answer
Training Path Chart: Made with some form of software(IE microsoft office)
question
TPS
answer
Training Path System: It contains Task sets, Training objective (TOS), Training Level Assignment(TLA), Table Assignment Matrix(TAM), Summarizes the training requirements for each of the PPP, Training Path Chart(TPC)
question
TPP
answer
Training Project Plan: Blue print on how to write a course.
question
TTO
answer
Training Time Out
question
VI
answer
Visual Information
